Audi License Plate Light Screw Specifications: A Comprehensive Guide

Audi license plate light screw sizes vary depending on the model of the car. While some Audi models use the standard length of the license plate screw, others have an extended length option. For example, the Prime Ave Stainless Steel License Plate screws are made of high-quality 316 stainless steel, fit most Audi vehicles, and have an extended length option. These screws have a hex head, which makes them easy to fasten, and come with two metric screws for the rear license plate and two self-tapping screws for the front.

It's important to note that different car brands require different screw types and sizes for their license plates. When replacing a license plate screw, it's crucial to choose the right size and type of screw to ensure a secure fit.

Screw size for different Audi models

The standard license plate screw size for most Audi models is M6-1.0 x 16mm. However, the screw size may vary depending on the specific model and year of the Audi vehicle.

For example, the Audi A4 B6 (produced from 2002-2005) may have different screw requirements than newer models. Additionally, some Audi models may use different types of screws, such as Phillips, flat head, or Allen wrench styles.

When replacing license plate screws, it is important to consider the length of the screw, as well as the type of license plate frame being used. The length of the screw will depend on whether you are using a regular frame, a plastic cover frame, or an extra-thick cover frame.

It is also worth noting that some Audi owners have reported issues with the license plate light screws, which may require replacement with similar-sized screws from hardware stores.

To ensure a proper fit, it is recommended to refer to the specific model and year of your Audi vehicle when selecting the appropriate license plate screws.

Screw materials and types

Screws are available in a variety of materials and types, each designed for specific applications and offering unique advantages. Here is an overview of some common screw materials and types to help you choose the right screw for your project:

Materials:

• Steel: Steel is the most common material for screws due to its low cost. It is suitable for indoor projects but may not be ideal for outdoor use or decking.
• Stainless Steel: Stainless steel screws offer rust resistance and can be used outdoors, making them a popular choice for decking and outdoor structures.
• Hardened Steel: Also known as construction screws, these are used in structural builds and can be coated for outdoor use.
• Brass: Brass screws are visually appealing and suitable for door hinges and cup hooks. They are soft and not as durable as other materials.
• Copper: Copper screws are known for their corrosion resistance, making them ideal for applications where the screw will be exposed to the elements.
• Aluminum: Aluminum screws are lightweight, making them a good choice when weight is a concern. However, they are not as durable as other materials.
• Titanium: Titanium screws offer a blend of strength and lightness, making them a premium choice for applications requiring robust and lightweight fasteners.

Types:

• Wood Screws: Wood screws are designed to join two pieces of wood together. They have a semi-threaded shank and come in various lengths, sizes, and drive types. #8 screws are standard for wood projects, and the length should be enough to penetrate halfway into the bottom material.
• Pocket Hole Screws: These screws are used for building furniture and cabinets, as they can be hidden in pre-drilled pocket holes. They have a self-tapping tip and a square drive that reduces the risk of stripping.
• Drywall Screws: Drywall screws are used to attach drywall to wood or metal studs. They feature a coarse thread and a flat tip for easy countersinking. They provide a stronger hold than drywall nails.
• Deck Screws: Deck screws are typically made from stainless steel to resist corrosion. They are suitable for outdoor use, such as building outdoor furniture, planters, or window boxes. Deck screws often have a star head to minimize stripping.
• Masonry Screws: Masonry screws are used for fastening materials to concrete, mortar joints, and brick. A pilot hole must be created before inserting a masonry screw. They come in flat head or hex washer head types.
• Sheet Metal Screws: Sheet metal screws are used to secure metal items together or to fasten metal to other materials like plastic or wood. They have sharp tips and fine threads along the shank.

When choosing screws for your project, consider the materials you are working with, the environment (indoor or outdoor), and the specific requirements, such as corrosion resistance or aesthetic appeal.

Screw size for other car brands

The screw size for license plates varies across different car brands and models. While the standard license plate screw size for most vehicles is 1/4-14-3/4 inch, this size does not fit all car makes and models.

For instance, BMW license plates typically require a screw size of M4.8 x 16mm, while Chevrolet cars and trucks usually take a screw size of #14 x 3/4".

If you own a Chrysler, the standard license plate screw size is 1/4-14×3/4, and the screw should have a 0.54″ head, a 0.25″ screw diameter, and a 0.86″ thread length. Chrysler owners should also look for stainless steel screws.

Ford vehicles typically use a screw size of 1/4″ x 3/4″, while Ford F-150 trucks require a screw size of 1/4-14-5/8 inch (1/4 inch threaded diameter, 14 threads, and 5/8 inch length).

Honda car and truck models typically take a screw size of M6-1.0 x 20mm or 1/4-14-3/4″. Hyundai vehicles, on the other hand, require a screw size of 0.23 inches in diameter, 0.46 inches in head size, and 0.64 inches in length.

If you own a Lexus, look for license plate screws measuring 6.3mm X25mm. Mercedes-Benz license plate screws vary in size depending on the model, but the most common sizes are 5mm and 6mm in diameter.

Mazda license plate screws have a diameter of 5mm and a thread length between 12-16mm. Nissan vehicles typically use a screw size of 1/4-14-3/4 inches, with extended screws for models with higher ground clearance.

Finally, Toyota license plate screws are typically sized at M6 1 x 0.5 x 0.5 inches, while Volkswagen vehicles use a standard license plate screw size of M6-1.0 x 16mm.

It's important to note that these are just standard screw sizes, and there may be variations depending on the specific model and year of your vehicle. When purchasing screws, it's always a good idea to consult a professional or refer to your car's user manual.

Where to buy Audi license plate screws

If you're looking to buy Audi license plate screws, there are a few options available to you.

Firstly, you could try your local hardware store. Some Audi owners have reported success in finding suitable screws at hardware stores such as Ace Hardware, Lowes, and Sears Hardware. Taking your old screw with you to match it up with a new one is a good idea.

Alternatively, there are several online retailers that sell Audi license plate screws. Amazon offers a wide range of options, including:

• HPP Stainless Steel License Plate Screws Compatible with Audi Models
• Black License Plate Screws for Audi and VW, Phillips Machine Pan Head 18-8, Stainless Steel, M6-1.0 x 10 mm Bolt (Pack of 4)
• Rear License Plate Screws Compatible with various Audi models, including the Q5, Q7, A4 Quattro, Q3, A5 Quattro, and e-tron
• M6 Nylon License Plate Screws - Compatible with Audi, Mercedes, VW, and other imports
• Trunknets Inc Front Bumper License Plate Bracket for Audi, which comes with 6 unique screw bolts and a wrench kit

Another online option is the Audi website, which sells License Plate Bracket Screws for the Audi A4.

Finally, some Audi owners have reported that they were able to get replacement screws from their dealer, although this may be more expensive than other options.

How to replace Audi license plate screws

Unsure what to do if your Audi license plate screw is worn out or missing? Here's a step-by-step guide on how to replace it.

First, you need to purchase the right replacement screws. You can buy these from automotive stores, car dealers, or online. When buying online, Amazon is a good option as it offers a wide range of products that fit perfectly with various car models. Ensure that the screws you choose are rustproof and made of high-quality materials such as stainless steel. The correct size for Audi license plate screws is the standard length, although an extended length option is also available.

Once you have the replacement screws, follow these steps:

• Use a Phillips or flathead screwdriver to unscrew the two old license plate screws. The license plate should have two screws above its edge.
• Detach the license plate and its frame and set them aside.
• Remove any dirt or debris around the holes.
• Position the license plate and its frame back in place.
• Place the new screws in the holes and begin to screw them in using a screwdriver until they are firm.
• Gently pull on the plate to ensure it is secure.

That's it! You have now successfully replaced the license plate screws on your Audi.

If you are having trouble removing the old screws, try using a flathead screwdriver to apply more pressure and slowly turn them out. You can also try breaking the plastic around the screw head and using needle-nose vise grips to remove them. Additionally, placing a piece of rubber between the screw head and the screwdriver can improve friction and torque.

Remember, it is important to keep your license plate screws secure and in good condition to avoid losing them or having them fall out. By following the above steps, you can easily replace your Audi license plate screws and ensure they are firmly in place.

Frequently asked questions