Bergara B14 Action Screw: Understanding The Right Fit

The Bergara B14 action screw size is dependent on the specific model within the series. The B-14 BMP and B-14 HMR models use 6-48 screws, while the B-14 Premier models use #8-40 screws. The B-14R model also uses #8 screws, but only if the holes are threaded for them. The B-14 Hunting series, which includes the Hunter, Sporter, Timber, and Ridge models, uses a tightening torque of 7.5NM or 67 inch-pounds. It is important to note that the front screw should be tightened first, followed by the rear screw, to achieve a perfect fit.

Bergara B-14 BMP action screw size

The Bergara B-14 BMP rifle is a chassis-style rifle with an aluminium chassis and an adjustable buttstock. The B-14 BMP rifle features a Bergara BMP Chassis Stock that is built for versatility and precision. The Bergara Match Precision rifle is built to offer a competition shooter's ideal rifle at an affordable price. The stock features a fully adjustable butt stock for comfort.

The B-14 BMP rifle has a scope mount that fits Remington 700 bases with 6-48 screws. The B-14 BMP rifle also has a Bergara barrel, which is complemented by the B-14 Action, a two-lug system with a sliding plate extractor and a coned bolt nose and breech to ensure smooth feeding and extraction of the cartridge. The B-14 Action has the same thread pitch as Remington. The B-14 BMP rifle also has a Bergara curved trigger, which is designed to guarantee a crisp, clean pull every time you fire the rifle. The trigger comes set at about three pounds.

The B-14 BMP rifle has a (#6) Bergara 4140 CrMo steel barrel that is finished in matte blue. The muzzle is threaded 5/8-24" and includes a thread protector. The B-14 BMP rifle has a 5-round AICS detachable magazine. The B-14 BMP rifle also has QD flush cups included in the stock to allow for easy attachment and detachment of slings.

The B-14 BMP rifle has an adjustable butt-stock with a cheek piece and length of pull. The butt-stock can also be removed to allow for a standard AR-style buffer tube and stock, allowing for customisations. The B-14 BMP rifle has an overall length of 39.5"-43.5", a barrel length of 20"-24", a muzzle threaded 5/8-24" with a knurled thread protector, a 5-round AICS-style detachable magazine, a stock with QD flush cup sling mounts and swivel mounts, and an adjustable cheek piece and length of pull. The B-14 BMP rifle has a calibre of 6.5 Creedmoor/1:8, .308 WIN/1:10, and a weight of 10.2 lbs-10.4 lbs.

The tightening torque specifications for the B-14 BMP rifle are 6.2NM or 55 inch-pounds. It is important to tighten the front screw first and then the rear screw to achieve a perfect fit.

Bergara B-14 HMR scope base screw size

The Bergara B-14 HMR rifle features an integrated mini-chassis moulded into the stock, a fully free-floated barrel, and an adjustable cheekpiece and length of pull spacers. It is built in Spain and delivers a level of quality and performance that is said to be unmatched in its price range.

When it comes to the scope base screw size for the Bergara B-14 HMR, there seems to be some variation in the screw sizes depending on the specific model. According to a user on Reddit, the B14 HMR uses 6x48 screws, while the Pro action uses 8x40 screws. Another user on the same thread mentions that the HMR and HMR Wilderness models use 6-48 screws.

Talley Manufacturing offers Bergara B-14 Scope Mounts that are compatible with the B-14 line of rifles. These scope mounts come with 6-48 screws for the B14 and 8-40 screws for the Bergara Premier.

Additionally, it is worth noting that any standard Remington 700 rail will work on the B-14 line, while the premier line requires a 700 rail with 8-40 screws.

Bergara B-14R rail screw size

The Bergara B-14R rail screw size is a topic that has been discussed on various forums and websites. It seems that there is some variation in screw sizes depending on the specific model of the Bergara B-14R rifle and the type of scope base being used. Here is a detailed compilation of information regarding the Bergara B-14R rail screw size:

The Bergara B-14R rifle typically uses a standard Remington 700 rail, and the screw size depends on whether it is a Premier model or not. The Premier models use larger 8-40 screws, while the other models, including the B-14R, usually have 6-48 screws. It's important to note that the B-14R's receiver is tapped for #6 screws.

Scope Base Compatibility:

When choosing a scope base for the Bergara B-14R, it's recommended to use a Remington 700 pattern base. Any standard Remington 700 rail will work on the B-14 line, but for the Premier line, a 700 rail with 8-40 screws is required. This information is confirmed by Bergara USA, who also recommends their Premier SA rail for the Premier line.

Scope Rail Recommendations:

Several scope rails are recommended by users for the Bergara B-14R. One user suggests a Warne Mountain Tech (0 MOA) rail, which fits the Rem 700 SA and can be adapted for the B-14R. Another user recommends the EWG 20 MOA Hunter with Keystone Rings, specifically mentioning that it requires #6 screws and is suitable for short actions. Additionally, the Warne scope rail is suggested, with a reminder that the regular model uses 6-48 screws, while the Warne rail for the Premier models has 8-40 screws.

Screw Length and Type:

In addition to screw size, it's important to consider screw length. One user mentions that the screw sizes for the HMR and HMR Wilderness models are 6-48. Regarding screw type, while some users suggest using blue Loctite instead of epoxy for bedding, others recommend following the rifle manufacturer's guidelines for allowable torque and the use of Loctite.

Bergara B-14 tightening torque specifications

Bergara rifles are based on the REM700 footprint, which means there are infinite aftermarket accessories for customization. When assembling a Bergara rifle, it is important to apply the correct tightening torque to avoid stock movements that may affect the safety or accuracy of the rifle.

The tightening torque specifications for the Bergara B-14 series are as follows:

B-14 Hunting Series (Includes HUNTER, SPORTER, TIMBER and RIDGE)

• 7.5NM or 67 inch-pounds.
• The manual indicates action torque to be 55lb/in.
• The front screw should be tightened first, followed by the rear screw.

B-14 Hybrid Series (Includes HMR, BMP, TERRAIN)

• 6.2NM or 55 inch-pounds.
• The B-14 HMR uses 6x48 screws for the scope base.
• The B-14 Pro uses 8x40 screws for the scope base.

Rimfire Hunting Series (BMR)

6.2NM or 55 inch-pounds.

Rimfire Hybrid Series (B14-R)

• 6.2NM or 55 inch-pounds.
• The B14-R is recommended to be fixed at 3NM - 25 inch-pounds.
• Some users have experimented with different torque settings, with some reporting better accuracy at 40-45 inch-pounds.

Rimfire Semiauto Series (BXR)

3.4NM or 30 inch-pounds.

Premier Series

6.2NM or 55 inch-pounds.

It is important to note that applying the correct tightening torque is crucial for the safe and accurate use of Bergara rifles. Deviations from the specified torque values can affect the performance and safety of the weapon.

Bergara B-14 action screw tightening order

The Bergara B-14 is a bolt-action rifle that comes in a variety of models, including the HMR, BMP, Hunter, and Ridge. The tightening order for the Bergara B-14 action screws is important to achieve a perfect fit. The front screw should be tightened first, followed by the rear screw.

The torque specifications for the action screws can vary depending on the model of the Bergara B-14. For the B-14 Hunting series (including the Hunter, Sporter, Timber, and Ridge models), the recommended torque specification is 7.5NM or 67 inch-pounds. For the B-14 Hybrid series (including the HMR, BMP, and Terrain models), the recommended torque is 6.2NM or 55 inch-pounds.

It is important to follow the manufacturer's instructions and use the correct torque specifications for your specific model of the Bergara B-14 rifle. Over-tightening or under-tightening the action screws can affect the safety, accuracy, and performance of the rifle.

In addition to the torque specifications, it is recommended to check the recoil tab or padding to ensure a better transmission of recoil on the stock. The recoil tab should rest perfectly on the rear surface of the stock.

For the Bergara B-14 HMR model, the action screws should be tightened to 55 in-lbs or 65 in-lbs, depending on the source of information. It is recommended to refer to the official product manual or contact Bergara's technical support service for the most accurate and up-to-date information regarding the tightening order and torque specifications for your specific model of the Bergara B-14 rifle.

Frequently asked questions