Whirlpool Dryer Terminal Block Screw Kit: Perfect Fit

The Whirlpool 279393 Dryer Terminal Block Screw Kit is a replacement screw and nut set for some Whirlpool, Admiral, Amana, Kenmore, KitchenAid, Maytag, Roper, and Whirlpool dryer models. The kit includes three screws and three nuts, with the screws measuring 7/16L x 7/16W x 11/16H and the nuts measuring 1/2L x 1/2W x 1/8H. The kit is used to connect electric dryer terminal wires to the terminal block and is chrome-plated for added conductivity.

The kit includes three screws and three nuts

The screws and nuts are chrome-plated for added conductivity. They are designed to fit specific terminal block models, so it is important to check compatibility with your dryer model before purchase. The screw dimensions are 7/16"L x 7/16"W x 11/16"H, while the nut dimensions are 1/2"L x 1/2"W x 1/8"H.

This kit is a high-quality replacement part that is easy to install and can help extend the lifespan of your dryer. It is a straightforward process to install the kit. First, unplug your dryer from the electrical outlet. Then, locate the terminal block, usually at the back of the dryer. Remove the old screws and nuts holding the terminal block in place and install the new ones from the kit. Tighten the screws to ensure a secure connection, and finally, plug your dryer back in.

By replacing loose or damaged terminal block screws, you can prevent electrical problems and potential fires. This kit provides a cost-effective and rewarding DIY solution to dryer repairs, ensuring your appliance is safe and functioning properly.

The screws are 7/16L x 7/16W x 11/16H

If you're looking for a dryer terminal block screw kit for a Whirlpool appliance, you can find a compatible product with the part number 279393. This kit includes three screws and three nuts, and it's designed to connect your dryer's power cord to the internal wiring. The screws in this kit are typically used to secure the power cord to the terminal block, which is usually located at the back of the dryer.

The measurements of the screws in this kit are 7/16 inches in length, with a width of 7/16 inches, and a height of 11/16 inches. These screws are specifically designed to fit Whirlpool dryers, and they meet all OEM standards.

It's important to note that before installing this kit, you should ensure that it is compatible with your specific dryer model. Additionally, always remember to unplug your dryer from the electrical outlet before attempting any repairs or installations.

The 279393 Dryer Terminal Block Screw Kit is a straightforward and cost-effective solution for replacing old or damaged screws, ensuring the proper functioning and safety of your dryer.

The nuts are 1/2L x 1/2W x 1/8H

The Whirlpool Dryer Terminal Block Screw Kit is a replacement part for your dryer that connects the dryer's power cord to the internal wiring. The kit includes three screws and three nuts, which secure the power cord to the terminal block. This kit is compatible with various dryer brands, including Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, and Roper.

When replacing the terminal block screws, it is important to take safety precautions and ensure that your dryer is unplugged from the power source. The process of installing the new screws and nuts is straightforward and can be completed in a few steps. First, remove the cover plate of the terminal block using a 5/16-inch socket or nut driver. Next, use a Phillips head screwdriver to remove the old screws that secure the power cord wires. Then, remove the mounting screws with a small flathead screwdriver by bending their locking tabs to unfasten the terminals and take out the old nuts.

Now you are ready to install the new Whirlpool Dryer Terminal Block Screw Kit. Insert the nuts into the terminal block, then reposition the terminals and bend back their locking tabs for a secure hold. Realign the terminal block on its brackets and use mounting screws to fasten it in place. Thread the new screws loosely before aligning the power cord wires, and then tighten them securely with a wrench or pliers. Finally, reposition the terminal block cover plate and rethread its screw. Your dryer is now repaired and ready to use!

The nuts included in the Whirlpool Dryer Terminal Block Screw Kit measure 1/2 inch in length, 1/2 inch in width, and 1/8 inch in height (1/2L x 1/2W x 1/8H). These dimensions ensure a proper fit with the terminal block, allowing for a secure connection between the power cord and the internal wiring of the dryer. It is important to use the correct size of nuts and screws to prevent electrical problems and ensure the safe and proper functioning of your dryer.

By following the installation instructions and using the appropriately sized nuts and screws, you can ensure that your dryer is safe and functioning correctly. Regular maintenance and replacement of worn or damaged parts can help extend the lifespan of your dryer and prevent potential issues.

The kit is compatible with Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, Roper

The PartsBroz 279393 Dryer Terminal Block Screw Kit is compatible with a wide range of dryer models from Whirlpool and its affiliated brands. This includes Whirlpool itself, as well as Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, and Roper. This compatibility ensures that owners of these dryer models can easily find a suitable replacement part to fix their appliance.

The kit includes three screws and three nuts, providing a secure connection for the dryer's power cord. It is designed to meet or exceed the manufacturer's specifications, ensuring a reliable and long-lasting repair. The kit is easy to install, requiring just a few simple steps. First, users need to unplug the dryer and locate the terminal block, usually at the back of the dryer. Next, they remove the old screws and nuts holding the terminal block in place and replace them with the new ones from the kit, tightening them securely. Finally, they can plug the dryer back in, and their appliance is ready to use again.

In addition to the brands mentioned above, the kit is also compatible with specific models from other brands, including GE and Jenn Air. It is important to check the compatibility of the kit with your specific dryer model to ensure it is the correct replacement part. The kit is designed to replace part numbers AP3020386, 279393D, 279393VP, 3184, AH334188, EA334188, and PS334188.

PartsBroz offers a range of replacement parts for appliances, aiming to provide high-quality and affordable solutions for customers looking to repair their appliances themselves. With their products and guidance, customers can save money and time by avoiding the need to call a repair service or buy a new appliance.

The kit is easy to install

First, you will need to locate the terminal block, which is usually at the back of the dryer. Once you have found it, remove the old screws and nuts holding the terminal block in place. You can do this by using a Phillips-head screwdriver to remove the old screws and a small flathead screwdriver to remove the mounting screws.

Next, install the new screws and nuts from the kit. Simply insert the new nuts into the terminal block and then reposition the terminals, bending back their locking tabs to ensure a secure hold. Realign the terminal block on its brackets and use the mounting screws to fasten it in place.

After that, thread the new screws loosely before aligning the power cord wires. Once everything is in place, tighten the screws securely with a wrench or pliers. Finally, reposition the terminal block cover plate and rethread its screw. Now you can plug your dryer back in, and you're done!

The whole process is simple and can be completed in a matter of minutes, helping to ensure your dryer is safe and functioning properly.

Frequently asked questions