Dryline Pro Screw Size: Know Your Exact Fit

DrylinePro™ is a plasterboard wall-fixing solution that allows users to fix items to dry-lined walls quickly, easily, and securely. DrylinePro™ is designed to address the challenge of attaching items to plasterboard-lined walls, which are now common in modern buildings. The DLP Fixing kits come with 75mm screws suitable for fixtures up to 5mm thick, and longer screws are available for thicker fixings. DrylinePro™ can be used to fix items such as LCD and Plasma TVs, shelves, curtain rails, mirrors, or radiators to dry-lined walls.

Screw length for fixing kits

DrylinePro™ is a plasterboard wall fixing solution for attaching items to dry-lined walls. It is ideal for mounting heavy items such as LCD and Plasma TVs, large mirrors, and radiators.

The DLP Fixing kits come with 75mm screws as standard. These screws are suitable for fixtures with a thickness of up to 5mm. If you are working with thicker fixtures, DrylinePro™ recommends using longer screws for optimal performance. This is achieved when the screw reaches the bottom of the DLP fixing, taking into account the fixture's thickness.

For example, if you are fixing a 25mm thick wooden baton to the wall, DrylinePro™ suggests using 100mm screws. They also offer other screw length options, including 80mm, 90mm, 100mm, and 120mm lengths.

Please note that the screw pack is an add-on to the DrylinePro™ kit and does not include the DLP fixings themselves. The longer screws are only necessary if you are fixing something thicker than 5mm.

Screw length for thin fixtures

Choosing the right screw length for thin fixtures is crucial to ensure a secure and stable connection. When selecting a screw for thin fixtures, such as those used in Dryline Pro applications, it's important to consider the thickness of the fixture and the type of material being fastened.

The DLP Fixing kits for Dryline Pro come with 75mm screws, which are suitable for fixtures up to 5mm thick. If you're working with fixtures thicker than 5mm, Dryline Pro recommends using longer screws for optimal performance. The screw should reach the bottom of the DLP fixing while taking into account the fixture's thickness.

As a general rule, the screw should always pass through the thinner piece and thread into the thicker piece. Aim for about 2/3 of the screw to be threaded into the secondary piece. However, as the thickness of the material increases, this ratio can be adjusted, and you can reduce it so that only 1/2 of the screw is threaded into the secondary piece.

For example, if you're fixing a 25mm thick timber baton to the wall, Dryline Pro suggests using 100mm long screws. They offer various screw lengths, including 80mm, 90mm, 100mm, and 120mm options.

It's worth noting that the optimal screw length may vary depending on the specific application and the materials involved. Always refer to the manufacturer's guidelines and recommendations for the best results.

Screw length for thick fixtures

When choosing the right screw length for a thick fixture, it is essential to consider the type of connection and the depth of the material. The screw length should be sufficient to ensure a secure connection without damaging the material.

The general rule is that the screw should always go through the thinner piece and thread into the thicker piece. Ideally, about 2/3 of the screw should be threaded into the thicker piece, but this ratio can be reduced to 1/2 if the thickness of the material increases.

For example, if you are fixing a 25mm thick timber baton to the wall using DrylinePro, a 100mm long screw is recommended. DrylinePro offers screws in various lengths, including 80mm, 90mm, 100mm, and 120mm options.

It is important to note that the longer the screw, the stronger the joint it can provide. However, the screw should not be longer than necessary, as it may break through the other side of the material. Additionally, thicker screws can hold stronger joints, but if they are too thick, they may split the material.

When selecting a screw, it is crucial to consider the type of wood and whether a pilot hole is required. The screw length should be chosen based on the thickness of the material being fastened, ensuring that there are at least three threads beyond the lower material to secure the connection.

Screw length for timber

Choosing the correct screw length for timber can be challenging, but there are some general guidelines to follow. Firstly, it is important to consider the thickness of the timber and the length of the screw in relation to it. The screw should be long enough to securely hold the timber pieces together, but not so long that it pierces through the other side.

As a general rule, about 2/3 of the screw should be threaded into the "secondary" piece of timber. This ratio can be adjusted as the thickness of the timber increases, and for longer screws, only 1/2 of the screw should be threaded into the secondary piece. For example, if you are fixing a 25mm thick piece of timber to a wall, a 100mm long screw would be recommended.

The type of wood also plays a role in screw selection. Hardwoods such as oak or walnut are more prone to splitting than softwoods like pine or cedar. Drilling a pilot hole in hardwoods before driving the screw is usually recommended to prevent splitting.

Additionally, the forces acting on the timber should be considered. If the timber will be subjected to lateral or sheer pressure, such as two boards attached flat and sliding against each other, a thicker screw may be necessary. For withdrawal pressure, where the boards are pulled straight apart, ensure that ample screw threads are inserted into the receiving board, with at least 1 to 1 1/2 inches of the thread embedded.

In summary, when selecting screw lengths for timber, consider the thickness of the timber, the type of wood, the desired ratio of threaded versus unthreaded portions, and the forces that will act on the timber.

Screw packs for DLP fixings

DrylinePro™ is a plasterboard wall fixing that allows you to fix items to dry-lined walls quickly, easily, and securely. DrylinePro™ is the perfect solution for fixing items such as LCD and Plasma TVs, shelves, curtain rails, mirrors, or radiators to dry-lined or plasterboard-lined walls.

The DLP Fixing kits come with 75mm screws, which are suitable for fixtures up to 5mm thick. If you are fixing something thicker than 5mm, you will need to purchase a separate screw pack with longer screws for optimum performance. The length of the screw will depend on the thickness of your fixture. For example, if you are fixing a 25mm thick timber baton to the wall, you would use 100mm long screws. We offer 80mm, 90mm, 100mm, and 120mm length options to accommodate various fixture thicknesses.

Please note that the screw pack does not include the DLP fixings. The screws are designed to be used in conjunction with the DrylinePro™ kit to provide a secure and reliable fixing solution for dry-lined walls. Dry-lined walls, also known as dot and dab walls, are common in many modern buildings as a quick and easy alternative to conventional plastering. However, attaching items to these walls can be challenging with conventional fixings due to the irregular gap between the plaster and the wall.

DrylinePro™ is specifically designed to address this issue, providing a strong and safe fixing solution without damaging the plasterboard. Our customers have praised the product for its strength, ease of use, and versatility, finally offering a reliable solution for fixing items to dry-lined walls.

Frequently asked questions