The Right Screw Size For Your Ford F-150 License Plate

If you're looking to replace the license plate screws on your Ford F-150, you'll need to know the correct screw size. The size of the screws varies depending on the model year of your F-150. For example, for the 2015-2020 Ford F-150, the recommended screw size is #14 1/4 X 3/4. You can find replacement screws at automotive stores, hardware stores, or online retailers. It's important to use the correct screw size to ensure your license plate is securely attached and to avoid damage to your vehicle.

#14 1/4 X 3/4 screws for Ford F-150 front license plates

If you're looking to secure your front license plate to your Ford F-150, then #14 1/4 X 3/4 screws are the perfect fit. These screws are compatible with all Ford F-150 trim levels and are suitable for both front and rear installations. With a larger head, the Phillips truss head screws provide better contact area and a stronger hold. Plus, you won't need any special tools—they can be easily installed using a regular Phillips screwdriver.

Made from grade 18-8/A2 stainless steel, these screws are built to last. No need to worry about rust or oxidation with these bolts. And at 1/4 inch in diameter and 3/4 inch long, they are the perfect size to keep your license plate securely in place.

Each pack comes with a complete set of four standard US unit, self-tapping, sharp-pointed screws. So if you're looking for a reliable and compatible screw for your Ford F-150's front license plate, the #14 1/4 X 3/4 screws are an ideal choice.

Ford F-150 rear license plate screws

The Ford F-150 is a popular truck, and like all vehicles, it requires license plate screws to secure the license plate to the vehicle. These screws are an essential but often overlooked component of a car or truck's exterior, as they ensure the license plate remains attached and legible.

When it comes to the rear license plate screws for the Ford F-150, there are a few things to consider. Firstly, it is important to use the correct screw size to ensure a proper fit and to avoid damage to the vehicle. The standard screw size for Ford license plate screws is 1/4" (#14) X 5/8", which can be purchased from automotive stores or online retailers. These screws are typically made of stainless steel and may feature a black oxide finish to match the vehicle's aesthetic and prevent rust.

In some cases, the rear license plate on the Ford F-150 may be attached using a combination of screws and nylon inserts. The screws themselves are typically sharp and pointed, allowing them to screw into the plastic bumper or nylon inserts securely. It is worth noting that some older models of the Ford F-150 may have different screw sizes, so it is always a good idea to check the specific requirements for your vehicle before purchasing new screws.

Additionally, there are a variety of specialty license plate screws available for the Ford F-150. These include anti-theft screws, which require a unique key for installation and removal, as well as lighted bolts that illuminate the license plate for increased visibility. When purchasing new screws, it is also common to find kits that include not only the screws but also washers and nuts, ensuring you have all the necessary components for a secure installation.

Ford F-150 license plate bracket

A license plate bracket is a good investment for your Ford F-150. It keeps your license plate secure and also protects it from damage. You can also use it to add a bit of style to your truck, as there are many designs to choose from.

Where to Buy Ford F-150 License Plate Brackets

You can buy Ford F-150 license plate brackets from a variety of online retailers, including Amazon, Walmart, CarParts.com, and Advance Auto Parts.

Price Range

The price of a Ford F-150 license plate bracket ranges from as low as $7 to over $1,700.

Common Issues with the Ford F-150 License Plate Bracket

It is important to regularly inspect your license plate bracket for any signs of damage or loosening. Here are some common issues to look out for:

• A loose bracket due to a lost bolt or a crack can cause the bracket to slap repeatedly against your truck as you drive. If this happens, pull over and replace the bolt or temporarily secure the bracket with tape before gluing it back in place with epoxy.
• Discoloration and surface damage can occur due to exposure to extreme temperatures. While this usually isn't serious, it can lead to breakage if left untreated. Cleaning, repainting, or polishing the bracket can help restore its appearance.
• If your bracket is constantly breaking or becoming damaged, you may need to reevaluate the fit. It's important to choose a bracket that allows for some space around the plate rather than one that is too snug.

Care and Maintenance

To extend the service life of your Ford F-150 license plate bracket, follow these care and maintenance tips:

• Clean the bracket regularly, focusing specifically on the brackets during car washes. For plastic brackets, a wash with soap and water followed by a coat of weatherproof wax is recommended. For chrome brackets, polish with chrome shine after washing.
• Check the bolts regularly, as they can loosen over time due to constant vibration. Applying a small amount of epoxy to the bolts can help keep them in place.
• Inspect the bracket often for cracks, which can grow quickly due to vibration. Epoxy putty can be used to repair small cracks, but if the damage is extensive, it may be necessary to replace the bracket.

Ford F-150 license plate screw alternatives

If you're looking for alternatives to the standard Ford F-150 license plate screws, there are a few options to consider.

First, it's important to note that the standard screw size for the Ford F-150 license plate is 1/4" (#14) X 5/8". This information can be useful when searching for alternative screws.

One option is to purchase a pack of license plate screws specifically designed for the Ford F-150. These screws are made of stainless steel with a black oxide finish and come in a pack of four. They are self-tapping and have a sharp point, making them easy to install.

Another option is to purchase a larger pack of license plate screws that are compatible with multiple Ford models, including the F-150. These screws are also made of stainless steel and have a black oxide finish. They come in a pack of 50, providing a cost-effective solution if you need screws for multiple vehicles or want to have spares on hand.

Additionally, you can find universal license plate screws that are compatible with a wide range of vehicles, including the Ford F-150. These screws often come in various finishes, such as stainless steel or black, and offer rustproof and anti-rattle features.

When choosing an alternative, it is important to consider the compatibility of the screws with your vehicle's license plate bracket or bumper. Some screws may require a plastic or rubber snap-in insert for proper installation.

By exploring these alternatives, you can find license plate screws that meet your specific needs and preferences, ensuring a secure and stylish fit for your Ford F-150.

Ford F-150 license plate screw kits

If you're looking to replace the license plate screws on your Ford F-150, there are a variety of screw kits available that will do the job. These kits typically come with four screws, which is the standard number of screws for a license plate. Here are some options to consider:

ReplacementScrews License Plate Screws

This kit comes with four 1/4 inch diameter (#14) and 3/4 inch long self-tapping screws made of grade 18-8/A2 stainless steel. They are compatible with all Ford models, including the F-150, Explorer, Mustang, Bronco, Expedition, Fusion, Edge, Excursion, and Focus. The larger head of the truss head screws provides better contact area and a stronger hold, and they can be installed with a regular Phillips screwdriver. These screws can be used for both front and rear installations as long as you have a plastic license plate bracket or bumper, or plastic/rubber snap-in inserts.

Clipsandfasteners License Plate Screws

These license plate screws are compatible with Ford vehicles and come in a pack of 50. The screw size is 1/4 inch (#14) x 5/8 inch, and they replace Ford # N800369-S2. They have received positive reviews from customers who have used them on various Ford models, including the F-150, Expedition, Explorer, and Excursion.

BuiltRight License Plate Mount

While not a screw kit, this product is a license plate relocation kit specifically designed for the 2021+ Ford F-150. It includes a bumper mounting bracket, a plate mounting bracket, a stainless steel hardware kit, and two license plate frames. The kit is made of durable 12ga steel with a black texture powder coating for corrosion resistance and allows for angle, vertical, and horizontal adjustment of the license plate.

When choosing a screw kit, it is important to consider the size of the screws, the compatibility with your vehicle, and the number of screws included. With these options, you can keep your license plate securely attached to your Ford F-150.

Frequently asked questions