Fujifilm Xt2: Headmount Screw Size Guide

The Fujifilm X-T2 is a mirrorless camera with a 24.3-megapixel APS-C X-Trans CMOS III sensor. It features a 3.0-inch LCD screen, an electronic viewfinder, and various film simulation modes. However, some users have reported issues with the camera's screws, particularly those on the lens mount, tripod mount, and base plate. These screws tend to come loose or fall out, leading to problems with the lens release button and aperture settings. While some users have attempted to replace the screws themselves, others have contacted Fujifilm for support. The company has generally been responsive, providing replacement screws or repair services, but there are also reports of high repair costs and long turnaround times. To prevent screws from loosening, it is recommended to check them periodically and consider using thread locker adhesives like Loctite or nail polish.

Tripod mount screw replacements

If the tripod mount screws on your Fujifilm XT-2 camera have fallen out or are rattling, you can try contacting Fujifilm customer support to request replacements. It seems that the outcome of this approach can vary depending on your location, but some users have reported receiving free replacement screws from Fujifilm within a week. When contacting customer support, it may be helpful to include a photo of the issue, as well as your camera's serial number.

If you would prefer to source your own replacement tripod mount screws, it is important to obtain the correct type of screw. The tripod mount screws on the Fujifilm XT-2 are reportedly M1.6 x 2mm or M1.6 x 2.3mm in size, with a flat or wafer screw head. The screw thread size for most cameras is 1/4-20 UNC, which is part of the Unified Thread Standard (UTS). This size refers to a 1/4-inch screw with 20 threads per inch. It is important to note that screw bolts that appear to have the same diameter may not be compatible if they have different thread specifications. Therefore, it is crucial to use the correct type of screw thread when replacing tripod mount screws.

When replacing the tripod mount screws on your camera, it is recommended to use a Phillips or JIS-style screwdriver, depending on the type of screw head. Be careful not to over-tighten the screws, as this can cause damage to the camera. Some people also suggest using a small amount of Loctite or nail varnish on the screws to help secure them in place. However, it is important to choose the right type of adhesive and apply it carefully to avoid damaging the camera.

Additionally, it is worth noting that the problem of tripod mount screws falling out may be due to faulty construction or the use of only two small fixing screws. To prevent this issue from occurring again, some users recommend using a quick-release plate or adaptor plate instead of screwing the camera directly onto the tripod.

Screw size and type

The Fujifilm X-T2 tripod mount screws have a metric M1.6 thread, which means the pitch is 0.35mm. The length of the screws is 2.3mm, including the thickness of the head. The screws have flat or wafer heads, with the latter being the type supplied by Fujifilm. The head diameter is 3.90mm, and the head thickness is 0.35mm.

The Fujifilm X-T2 lens mount screws are prone to coming loose, especially when heavy lenses are attached to the camera body. To prevent this, you can use a small amount of thread locker or nail polish on the screw threads. It is important to use a removable thread locker, such as Loctite Purple, and to protect the camera's sensor when applying it.

When tightening or loosening the screws, it is recommended to use a JIS-style screwdriver, although a Phillips #0 screwdriver can also be used. These screws are very small and can be easily over-tightened or broken, so it is important to be careful when working with them.

It is a good idea to periodically check the screws on your Fujifilm X-T2 camera, as well as clean it, to ensure that they are tight and in good condition.

Locating replacement screws

If you are looking for replacement screws for your Fujifilm XT-2, there are a few options you can consider:

Contacting Fujifilm Support

The first option is to reach out to Fujifilm support. You can email them with a photo of the issue, your camera serial number, and your address. Some users have reported that Fujifilm Germany/Austria support was very helpful and they received the replacement screws within a week free of charge. However, experiences may vary, and some users from North America and other parts of Europe have reported different outcomes.

Sourcing Your Own Screws

If you prefer to source your own screws, you will need to determine the correct dimensions. The screws that attach the tripod mount to the camera case are M1.6 screws with a 1.6 mm width, including the screw thread. The length, including the thickness of the head, is 2.3 mm, but a slightly longer screw may also work. It is important to use flat or wafer head screws to ensure they do not protrude from the base of the camera. You will also need a Phillips head size #0 screwdriver for installation.

Visiting a Local Camera Store

Another option is to visit your local camera store. They may have a supply of screws from cameras that have been thrown away and may be able to find one that fits your Fujifilm XT-2.

Using a Quick-Release Plate

As a preventative measure, some users have suggested using a quick-release plate instead of screwing the tripod directly into the camera. This can help avoid the issue of screws working loose over time.

Using Thread Locker

If you are concerned about screws coming loose, you can use a thread locker like Loctite on the screws. However, be sure to choose the correct type and strength to avoid making future repairs difficult.

Screwdriver type

When it comes to the screwdriver type, it is important to note that the Fujifilm XT-2 tripod mount screws require a very specific type of screwdriver. The two types of screwdrivers that are mentioned in the sources are the Phillips and the JIS (Japanese Industrial Standard) screwdriver.

The Phillips screwdriver is a common type of screwdriver with a cross-shaped tip that is designed to fit into the cross-shaped recess of Phillips head screws. It is important to note that there are different sizes of Phillips screwdrivers, and for the Fujifilm XT-2 tripod mount screws, you will need a Phillips #000 or Phillips #0 screwdriver. Using a Phillips screwdriver that is too small for the screw head can potentially damage the screw.

The JIS screwdriver, on the other hand, is a type of screwdriver that is designed to fit Japanese Industrial Standard screws. JIS screws are commonly used in equipment designed and manufactured in Japan, which includes the Fujifilm XT-2. The JIS screwdriver has a slightly different design than the Phillips screwdriver, and it is said to provide a better fit and more torque when used with JIS screws.

Some people suggest using a thread locker, such as Loctite, or even a tiny drop of nail varnish on the screws to prevent them from coming loose again. However, it is important to be careful when choosing the right type of thread locker and to use only a very small amount to avoid damaging the camera.

Additionally, it is recommended to check the screws on your camera periodically and tighten them if necessary. This is because the tripod mount screws on the Fujifilm XT-2 have been known to come loose, especially when used with heavy lenses. By regularly checking and tightening the screws, you can help prevent this issue and ensure the stability of your camera.

Preventing screws from loosening

While there is no information on the exact screw size for the Fujifilm XT-2 headmount, there are several ways to prevent screws from loosening.

Preventative Measures

Before installing a screw, you can apply a thread-locking glue to the threads of the screw. Allow the glue to dry before using the screw to hold tension. You can also fill in the screw hole with additional material to provide increased friction. For example, if the hole is in wood, you can break off the end of a wooden matchstick or skewer and insert it into the hole before reinstalling the screw.

Alternative Screw Types

Alternatively, you can try using a serrated screw, which has raised edges underneath the head to grip into the surface better due to the extra friction. You can also use a threaded insert, which is a small metal coil that you put in the bottom of a screw hole to help it tighten properly. Finally, you can use wedge lock washers, which are a pair of circular disks with interlocking serrations that prevent the screw from coming undone.

Other Methods

If you are screwing into wood, you can remove the screw, fill the hole with wood glue and a wooden dowel, drill a new hole, and then reinstall the screw. You can also use a removable or permanent threadlocker fluid, which will bond the screw tightly in place.

Frequently asked questions