The Les Paul Pickguard Screw Size You Need

gibson les paul pickguard screw size

Gibson Les Paul pickguard screws are available in a variety of colours and sizes. The standard size for a Gibson pickguard screw is 3/8, which is smaller than the 1/2 standard used by Fender. The screws are available in a range of colours, including black, chrome, gold, and nickel. They can be purchased in packs of 12, 20, or 25.

Characteristics Values
Length 3/8"
Colour Black, Chrome, Gold, Nickel
Head Shape Phillips Ovalhead
Quantity 12, 20, 25

shuntool

Gibson pickguard screw size compared to Fender

The Gibson Les Paul pickguard screw size is #3 x 3/8". The screws have a Phillips head and are sold in packs of 20. They are available in nickel, gold, and black.

The pickguard screw size for most Fender instruments is 4 x 1/2". These screws also have a Phillips head and are sold in packs of 24. They are available in stainless steel, chrome, black, gold, and relic nickel.

The main difference between the Gibson and Fender pickguard screw sizes is that Gibson uses 3/8" screws, while Fender uses 1/2" screws. This means that the Gibson screws are slightly smaller in length than the Fender screws.

It is important to note that the correct screw size for a pickguard can vary depending on the specific model and brand of guitar. While the information provided above is generally applicable to Gibson and Fender guitars, there may be some models that use different screw sizes. Therefore, it is always a good idea to check the specific requirements for your guitar before purchasing or installing any hardware.

In addition to the screw size, it is also important to consider the type of screw head required for your guitar. Both Gibson and Fender use Phillips head screws for their pickguards, which is the most common type of screw head used in guitar construction. However, there may be some models that use different types of screw heads, such as flat head or Allen key screws.

shuntool

Where to buy Gibson pickguard screws

If you're looking to buy Gibson pickguard screws, there are a few online retailers that stock them.

Allparts

Allparts sells a pack of 20 Gibson-size pickguard screws with a Phillips head for $5.20 USD. They also offer various discounts and promotions for signing up to their email list or for bulk orders.

Philadelphia Luthier Tools & Supplies, LLC

Philadelphia Luthier Tools & Supplies, LLC offers free standard shipping for orders over $50 for US customers. They sell a pack of 25 #3 X 3/8" (9.5mm) pickguard and backplate screws for Gibson guitars in black, chrome, gold, and nickel. These are aftermarket parts and not genuine Gibson parts.

StewMac

StewMac has pickguard screws for Gibson guitars in stock and ready to ship in nickel, relic nickel, black, and gold. The screws are Phillips oval-head and 3/8" in length, which is the standard for Gibson.

Amazon

Amazon offers a pack of 20 nickel Gibson-size pickguard screws from Allparts with 4.9 out of 5 stars from 23 ratings. The listing also includes reviews from buyers who have used the screws for Gibson guitars, including the SG model, and found them to be the correct size.

WD Music

While not specifically for Gibson pickguards, WD Music offers #3 x 3/8" screws that are listed as being for Gibson pickguards. They also offer a range of other screws and kits for pickguards, truss rod covers, back plates, and brackets.

ToneShapers

ToneShapers offers Gibson pickguard screws in nickel, sold by the dozen for $3.99 USD. These #3 screws are slightly smaller than the #4 screws used by Fender and are nickel-plated steel.

It's important to note that the availability and pricing of these products may change over time, so be sure to check the retailers' websites for the most up-to-date information.

shuntool

Gibson pickguard screw colours

When it comes to Gibson pickguard screw colours, there are a few options to choose from. The standard colour for Gibson pickguard screws is nickel, but they can also be found in black, gold, and relic nickel. These screws are typically Phillips oval-head screws that fit countersunk pickguards and cover plates. They are usually 3/8" in length, which is the standard size for Gibson guitars.

It's important to note that the screws for Gibson guitars are different from those used in Fender guitars. Gibson screws are typically smaller than Fender screws, which use a 1/2" standard. When replacing pickguard screws, it's crucial to get the correct size and type of screw to avoid damaging the guitar.

Some sources also offer a pickguard bracket screw and nut set for Gibson Les Paul guitars. This set includes two #6-32 x 5/16" nickel Phillips flat head screws, two #6 zinc lock washers, two #6-32 nickel hex nuts, and four #3 x 3/8" nickel pickguard screws. This set is available in gold and nickel finishes.

Another option for Gibson pickguard screws is the #3 x 3/8" (9.5mm) oval Philip head screw, which is available in black, chrome, gold, and nickel finishes. These screws are commonly used on Gibson guitars for the pickguard, jack plate, and backplates. They are smaller than the screws typically used on Fender guitars.

When choosing Gibson pickguard screw colours, it's important to consider the overall aesthetic of the guitar and select a colour that complements the other hardware and finishes. Whether you choose nickel, black, gold, or relic nickel, it's crucial to ensure the screws are the correct size and type for your specific Gibson model.

shuntool

Gibson pickguard screw quantity

The Gibson Les Paul pickguard screw size is #3 x 3/8" (9.5mm). These screws are smaller than the ones used on Fender guitars, which use a 1/2" standard. The Gibson pickguard screws are available in a variety of colours, including nickel, black, chrome, gold, and relic nickel.

The quantity of screws needed for a Gibson pickguard can vary depending on the model and the specific application. Some sources offer packs of 12, 20, or 25 screws, suggesting that the quantity required could fall within these ranges. It is always recommended to have a few extra screws on hand in case of loss or damage.

When purchasing Gibson pickguard screws, it is important to ensure that they are specifically designed for Gibson guitars, as the screw size can vary between guitar brands. The screws should also be of high quality to ensure a secure fit and to avoid potential damage to the guitar.

In addition to the quantity and quality of the screws, it is also important to consider the type of screw head. Phillips ovalhead screws are commonly used for Gibson pickguards, as they fit countersunk pickguards and cover plates. This type of screw head provides a flush finish and a secure hold.

shuntool

Gibson pickguard screw head shape

When it comes to Gibson pickguard screw head shape, the standard is Phillips oval-head screws. These screws are designed to fit countersunk pickguards and cover plates on Gibson guitars. The specific screw size for Gibson pickguards is #3 x 3/8" (or 9.5mm), which is shorter than the standard 1/2" screws used by Fender.

It is important to note that while these screws are commonly used for Gibson guitars, they may also work on other guitar brands or models. It is always a good idea to check the specific screw size and type required for your particular guitar before making any purchases or starting any installation work.

The Gibson pickguard screws are available in a variety of colours and finishes, including nickel, relic nickel, black, and gold. These screws are typically sold in packs of 20 or 25, and can be purchased from various retailers and suppliers, both online and in physical stores.

When replacing or installing a pickguard, it is essential to use the correct type and size of screws to ensure a proper fit and to avoid any damage to the guitar. It is recommended to consult a professional or experienced guitarist if you are unsure about the process or the specific screws needed for your guitar.

By following these guidelines and using the correct Gibson pickguard screw head shape and size, you can ensure a secure and accurate installation, maintaining the integrity and appearance of your guitar.

Frequently asked questions

The screw size for a Gibson Les Paul pickguard is #3 x 3/8" (9.5mm).

Gibson Les Paul pickguard screws can be purchased from various online retailers, including Amazon, Allparts, Philadelphia Luthier Tools & Supplies, and ToneShapers.

Gibson Les Paul pickguard screws are available in black, chrome, gold, and nickel.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment