The Right Screw Size For Guitar Hanger Cc01

The CC01 guitar hanger by String Swing is a low-cost way to store your guitar or bass safely. The hanger provides enough clearance from the wall to accommodate acoustic guitars, basses, and electric guitars. The CC01 features a pivoting yoke that cradles the instrument's headstock and helps prevent accidental drops. The hanger is made of natural hardwood and comes in four different wood options: cherry, oak, ash, and black walnut. The mounting hardware is included with the CC01 guitar hanger, with screws and drywall anchors provided.

Screw hole spacing is 2.5 vertically

The String Swing CC01 Guitar Hanger is a great way to keep your guitar off the floor and add a musical vibe to your room. The hanger features a 2.5" vertically aligned screw hole spacing. This allows for easy installation and ensures that your guitar is securely mounted to the wall.

The CC01 Guitar Hanger comes with mounting hardware, including screws and drywall anchors. When installing the hanger, choose a location on the wall and drive the screws through the mounting holes into the wall using a Phillips screwdriver. If you cannot find a wall stud, you may need to create pilot holes for installing the plastic toggles or drywall anchors. Use a screwdriver to push and turn the toggle clockwise until it is flush, then remount the hanger with the screws.

The CC01 Guitar Hanger is designed to accommodate a variety of instruments, including acoustic and electric guitars, basses, mandolins, and ukuleles. The yoke can pivot to fit different sizes and shapes of headstocks, and the cradle is padded to securely hold the instrument in place. The hanger also includes keeper rings for additional security.

The CC01 Guitar Hanger is made of natural hardwood, with four wood options available: Cherry, Oak, Ash, and Black Walnut. The hardwood construction adds elegance and durability to the hanger, making it a welcome addition to any room.

With a weight capacity of 15 lbs, the CC01 Guitar Hanger provides a safe and secure way to display your guitars or other instruments. The 2.5" vertically aligned screw hole spacing ensures that the hanger is firmly attached to the wall, preventing accidental drops and keeping your instruments safe.

The CC01K is an upgrade of the CC01

The CC01K Guitar Keeper is attached to a wall mount made of North American hardwood and handcrafted by local Amish craftsmen. It is available in four wood options: Cherry, Oak, Ash, and Black Walnut. The hanger uses protective padding to safeguard the finish of valuable guitars. With the support of the CC01K, guitarists can benefit from optimized storage and an impressive display of their favourite instruments.

The CC01K is easy to install. First, choose a location on the wall for the hanger. Then, press screws through the mounting holes of the hanger into the wall using a Phillips screwdriver. If a wall stud is not found, pilot holes are necessary for installing the drywall anchors. Use the screwdriver to push and turn the toggle clockwise until flush, then remount the hanger with a screw into the anchors. Do not reuse the anchors. The weight limit for the CC01K hanger is 15 lbs per hanger.

The CC01K guitar hanger is a great, low-cost way to keep your guitar or bass safely off the floor while showcasing your prized instrument. The CC01K provides enough clearance from the wall to accommodate acoustic guitars, basses, and electric guitars. The natural hardwood elegance of the CC01K makes it a welcome addition to any room. The pivoting yoke of the CC01K securely cradles your instrument's headstock and helps prevent drops when putting up or taking down your guitar.

The CC01 is suitable for classical guitars

The CC01 guitar hanger is a great option for classical guitars. This wall-mount guitar hanger is a safe and low-cost way to keep your classical guitar off the floor and on display. The CC01 is designed to provide enough space between the guitar and the wall to accommodate the depth of acoustic and electric guitars, as well as basses. This makes it perfect for classical guitars, which tend to have wider bodies.

The CC01 features a padded, pivoting cradle that securely holds the headstock of your classical guitar. The cradle is adjustable to accommodate various guitar sizes and shapes, ensuring a perfect fit for your instrument. The yoke can pivot to fit a wide range of headstocks, allowing you to integrate a variety of guitars, including acoustics and electrics, as well as mandolins and 4-5 string basses.

The CC01 is crafted with attention to detail and quality. The cradle is made of steel, hand-welded, and covered in protective padding to ensure the safety of your guitar. The cradle is mounted to a wood block made of authentic North American hardwood, handcrafted by local Amish craftsmen. You have the option to choose from four species of hardwood: Cherry, Oak, Ash, and Black Walnut. The natural elegance of the hardwood adds a stylish touch to your guitar display.

Installation of the CC01 is straightforward. The mounting hardware is included, and you can choose the desired location on your wall. If you're mounting onto a wall stud, simply drive the screws through the mounting holes. For other wall types, you may need to create pilot holes and use plastic toggles or appropriate masonry screws, which can be purchased separately. The recommended weight limit for the CC01 hanger is 15 lbs or less.

The CC01 is made of North American hardwood

The CC01 is a wall mount guitar hanger, designed to display your guitar or bass safely and elegantly. The North American hardwood block is handcrafted by local Amish craftsmen. The cradle is built of steel, hand-welded, and covered in protective padding to ensure the finish of your guitar remains pristine. The cradle width is adjustable to accommodate guitars, mandolins, and 4-5 string basses. The CC01 also features a pivoting yoke to help prevent drops when putting your guitar up or taking it down, and keeper rings for extra security.

The CC01 is a great option for displaying your guitar or bass, adding a musical vibe to your room, and keeping your instrument safely off the floor. The hardwood block matches most decors, making it a welcome addition to any room.

The CC01 is trusted by over 10 million guitars since 1987 and is backed by a lifetime structural warranty.

The CC01 has a weight capacity of 15 lbs

The CC01 guitar hanger by String Swing is a great way to keep your guitar or bass safely off the floor while showing off your prized instrument. The CC01 has a weight capacity of 15 lbs, which is the recommended weight limit for use of this hanger. This means that the CC01 can accommodate acoustic guitars, electric guitars, and basses. The CC01 is also perfect for many different instruments, including mandolins and ukuleles. The CC01's pivoting yoke cradles your instrument's headstock and helps prevent drops when putting your guitar up or taking it down.

The CC01 guitar hanger features a padded, pivoting cradle to securely hold the guitar's headstock. The adjustable cradle width can accommodate guitars, mandolins, and 4-5 string basses. The cradle is built with steel, hand-welded, and covered in protective padding for quality assurance. The CC01 also includes keeper rings to ensure that your instrument stays securely in place.

The CC01 guitar hanger is mounted to a wood block made of authentic North American hardwood, handcrafted by local Amish craftsmen. There are four species of hardwood available: Cherry, Oak, Ash, and Black Walnut. The natural wood colour may vary. The CC01 is trusted by over 10 million guitars since 1987 and is backed by a lifetime structural warranty.

The CC01 is easy to install and can be mounted to a wall using the included mounting hardware. Choose a location for the hanger and drive screws through the mounting holes of the hanger into the wall using a Phillips screwdriver. If a wall stud is not found, pilot holes are necessary for installing the plastic toggles. Use a screwdriver to push and turn the toggle clockwise until flush, then mount the hanger with screws into the plastic toggles. Do not reuse toggles for remounting.

Frequently asked questions