Vesas: Choosing The Right Screw Size For Wall Mounts

When it comes to mounting a television or monitor, selecting the right screw size for your VESA wall mount is crucial. The VESA Mounting Standard is a set of regulations for monitor and TV mounts that most brands follow. It defines the distance between the mounting holes on the back of a TV, so it's important to understand how the standard works before mounting your TV. The VESA standard dictates the placement of the hole pattern on the back of displays and the screws used to fit into those holes. The size of VESA screws required depends on the weight of the television and what the VESA mount can hold. VESA provides three standard measurements for all flat-screen mounting screw requirements: length, diameter, and pitch.

The VESA standard dictates the placement of the four-hole pattern on the back of most flat-panel displays

To determine the VESA size of your TV, you can refer to the user manual or the manufacturer's website. If this information is not available, you can easily measure the VESA size by following these steps:

• Measure the horizontal distance between the centres of the left and right holes to get the first measurement.
• Measure the vertical distance between the centres of the top and bottom holes to get the second measurement.
• Convert the measurements from inches to millimetres if needed, as VESA sizes are typically expressed in millimetres.

For example, if the horizontal measurement is 400mm and the vertical measurement is 200mm, the VESA size would be represented as 400x200. This standardisation of the four-hole pattern ensures that consumers can find compatible mounts for their flat-panel displays.

It is important to note that the VESA standard not only dictates the placement of the holes but also includes specifications for the screws used in the mounting process. The size of the VESA screws depends on the weight of the television and the load capacity of the VESA mount. VESA provides standard measurements for screw length, diameter, and pitch to ensure a secure fit for flat-screen televisions and monitors.

The size of VESA screws depends on the weight of the television and the VESA mount's capacity

The Video Electronics Standards Association (VESA) is a non-profit organisation that provides standards for a range of industries. This includes standards for flat-screen television wall mounts, which dictate the placement of the hole pattern on the back of displays and the screws used to fit into those holes.

The size of VESA screws required depends on the weight of the television and the capacity of the VESA mount. VESA provides standards for screens weighing up to 110 pounds and those weighing more than 110 pounds.

For screens weighing 110 pounds or less, screws must have a minimum diameter of 6 millimetres (1/4-inch) and a pitch of 1.0. Pitch refers to the number of ridges on a screw per unit of measure. These screws must have a threaded length of at least one and a half times the diameter of the screw, excluding the length of the screw head and any anchor. VESA recommends a standard screw length of 12 millimetres (1/2-inch) for this category.

For screens weighing more than 110 pounds, VESA requires a minimum screw diameter of 8 millimetres (1/3-inch) and a pitch of 1.25. The minimum thread length is the same as for the previous category, but VESA recommends a standard length of 16 millimetres (0.63-inch).

In addition to weight, the size of VESA screws also depends on the VESA size of your television, which refers to the distance between the mounting holes on the back of the TV. M4 screws are typically used with smaller sizes (under 200 mm), while M6 screws are commonly used for 200x200 televisions and M8 screws are for larger screens.

VESA provides two sets of standard sizes for wall mount screws: for screens weighing up to 110 pounds and those weighing over 110 pounds

The Video Electronics Standards Association (VESA) is a non-profit organisation that provides product standards for a number of industries under the general banner of technology. This includes standards for devices used to mount flat-screen televisions. The size of VESA screws required for a VESA-approved wall mount depends on the weight of the television and what the VESA mount can hold.

Screens Weighing Up to 110 Pounds

Screws for screens that weigh 110 pounds or less must have a minimum diameter of 6 millimetres (1/4-inch) and a pitch of 1.0. Pitch refers to the number of ridges on a screw per unit of measure, in this case, millimetres. These screws must have a threaded length of at least one and a half times the diameter of the screw. The threaded length excludes the length of the screw head and any anchor the screw may have. VESA recommends a standard screw length of 12 millimetres (1/2-inch) for this category.

Screens Weighing Over 110 Pounds

For screens that weigh more than 110 pounds, VESA requires a minimum screw diameter of 8 millimetres (1/3-inch) and a pitch of 1.25. As with the previous category, VESA requires a minimum thread length of one and a half times the diameter of the screw for mounting screens that weigh more than 110 pounds. The organisation recommends a standard length of 16 millimetres (0.63-inch), although manufacturers may determine the exact length themselves, providing it conforms to the standards.

The length of the screw will vary depending on the metal's thickness on the wall mounts

The Video Electronics Standards Association (VESA) is a non-profit organisation that provides product standards for the technology industry. These standards include the size of VESA screws required for VESA-approved wall mounts. The size of the screws depends on the weight of the television and the weight capacity of the mount.

VESA provides two sets of standard sizes for wall mount screws: one for screens weighing up to 110 pounds and one for screens weighing more than 110 pounds. The length of the screw will vary depending on the metal's thickness on the wall mounts.

For screens weighing 110 pounds or less, VESA screws must have a minimum diameter of 6 millimetres (1/4-inch) and a pitch of 1.0. The pitch refers to the number of ridges on a screw per unit of measure. These screws must also have a threaded length of at least one and a half times the diameter of the screw. The threaded length excludes the length of the screw head and any anchor. VESA recommends a standard screw length of 12 millimetres (1/2-inch) for this category.

For screens weighing more than 110 pounds, VESA requires a minimum screw diameter of 8 millimetres (1/3-inch) and a pitch of 1.25. The minimum thread length is the same as for the previous category, but VESA recommends a standard length of 16 millimetres (.63-inch). It is important to note that manufacturers may determine the exact length of the screws themselves, as long as they conform to VESA's minimum standards.

VESA-certified wall mounts typically come packaged with all the necessary screw sizes, lengths, spacers, and washers required for mounting. If you already own a wall mount but need the screws, you can use VESA standards to purchase the correct screws or contact the manufacturer for recommendations.

To determine the correct screw size, refer to a VESA screw size chart that lists measurements with corresponding screw sizes

For screens weighing 110 pounds or less, screws must have a minimum diameter of 6 millimeters (1/4-inch) and a pitch of 1.0. VESA recommends a standard screw length of 12 millimeters (1/2-inch) for this category.

For screens weighing more than 110 pounds, VESA requires a minimum screw diameter of 8 millimeters (1/3-inch) and a pitch of 1.25. The organisation recommends a standard length of 16 millimeters (0.63 inches) for this category.

It's important to note that the length of the screw will vary depending on the metal's thickness on the wall mounts. Additionally, the VESA standard dictates the placement of the hole pattern on the back of the display, with the pattern centred on the display's back to minimise torquing forces and allow the wall mount to hold a heavier load.

When purchasing screws, you can refer to VESA standards or contact the wall mount manufacturer for recommendations.

Frequently asked questions