Simple And Effective Ways To Hang A Ring Doorbell Without Drilling

Are you eager to install a Ring Doorbell at your home but hesitant about drilling into your walls? No worries! In this guide, we will show you how to hang a Ring Doorbell without drilling. Whether you are living in a rented space, don't want to damage your walls, or simply prefer a drill-free installation, we've got you covered. Get ready to enhance your home security and reap the benefits of a Ring Doorbell, all while keeping your walls intact.

Alternatives to drilling for installing a Ring doorbell

When installing a Ring doorbell, drilling into your wall or door frame may not be an option. Luckily, there are several alternatives to securely mount your Ring doorbell without drilling. Whether you're renting a property or simply want to avoid drilling holes, these methods will provide a reliable and hassle-free installation. Here are some alternatives to drilling for installing a Ring doorbell:

Mounting Bracket:

Use a mounting bracket specifically designed for Ring doorbells. These brackets are made of sturdy materials and can be attached to various surfaces, like wood, siding, or brick, without the need for drilling. Simply use screws or adhesive tape to secure the bracket, and then attach your Ring doorbell to the bracket.

Adhesive Strips:

Double-sided adhesive strips, such as heavy-duty outdoor mounting tape, can also be used to install your Ring doorbell. Ensure the surface is clean and dry before applying the adhesive strips. Press the adhesive firmly against the back of the Ring doorbell and then attach it to the desired location. Make sure to follow the manufacturer's instructions for maximum adhesion strength.

Command Strips:

Similar to adhesive strips, Command Strips offer a convenient and damage-free way to mount your Ring doorbell. These strips come in different sizes and weight capacities, so choose the appropriate size for your doorbell model. Clean the surface, apply the Command Strips, and firmly press your Ring doorbell onto the strips. It's important to note that extreme temperature or humidity conditions may affect the adhesive strength of the strips.

Corner Kit:

Some Ring doorbell models, such as the Ring Video Doorbell 3 Plus, come with corner kits that allow you to adjust the doorbell's viewing angle. These corner kits can also be used to install the doorbell without drilling. Simply mount the corner kit to the desired location using screws or adhesive, and then attach the Ring doorbell to the kit.

Over-the-Door Mount:

If you have a peephole or a traditional door knocker, you can utilize an over-the-door mount to install your Ring doorbell. These mounts usually clamp onto the top of your door and provide a stable platform for your doorbell. Attach the Ring doorbell to the mount and ensure it is securely positioned before use.

Before selecting an alternative installation method, consider the specific requirements and limitations of your Ring doorbell model. Always follow the manufacturer's guidelines and recommendations for safe and proper installation.

Using adhesive tape to securely hang a Ring doorbell

The Ring doorbell is a popular smart home device that allows you to monitor and interact with your front door from anywhere. Installing a Ring doorbell typically requires drilling holes in your wall or door frame to secure the mounting bracket. However, if you're looking for a non-permanent option or simply don't want to drill into your surfaces, you can use adhesive tape to securely hang your Ring doorbell. Here's how you can do it:

• Choose the right adhesive tape: Select a high-quality adhesive tape that is strong enough to hold the weight of your Ring doorbell and withstand various weather conditions. Double-sided acrylic foam tape or outdoor mounting tape are good options to consider. Make sure to choose a tape that is specifically designed for outdoor use and can adhere to your wall or door frame surface.
• Clean the mounting surface: Thoroughly clean the area where you plan to attach the adhesive tape. Use a mild cleaning solution and a clean cloth to remove any dirt, dust, or grease. This step is crucial to ensure a strong and long-lasting bond between the tape and the surface.
• Cut the tape to the desired size: Measure the height and width of the backside of your Ring doorbell to determine the size of the tape you will need. Cut two strips of tape that are slightly smaller than the dimensions of the backside of the device.
• Apply the tape to the backside of your Ring doorbell: Remove the protective backing from one side of the tape and carefully apply it to the backside of your Ring doorbell. Make sure to align the tape with the edges of the device to provide proper support. Repeat this step with the second strip of tape, making sure to evenly distribute them across the backside of the device.
• Press the Ring doorbell firmly onto the mounting surface: Once the tape is securely attached to the backside of your Ring doorbell, position the device on the desired mounting surface. Apply firm pressure to ensure a strong bond between the tape and the surface. Hold the device in place for a few seconds to allow the adhesive to set.
• Test the installation: Once the Ring doorbell is mounted using the adhesive tape, give it a gentle tug to ensure it is securely attached. If it feels loose or unstable, remove the device and reapply the tape, making sure to follow the instructions provided by the tape manufacturer.

Important considerations:

• Adhesive tape is not as reliable as drilling and using mounting screws. Factors such as extreme temperatures or heavy impacts may weaken or detach the tape.
• Regularly check the stability of the Ring doorbell and reapply the tape if necessary.
• Before using adhesive tape, consult the Ring doorbell's user manual to ensure it is compatible and won't void any warranty.

By following these steps, you can securely hang your Ring doorbell without drilling any holes. Remember that although adhesive tape is a convenient option, it may not provide the same level of stability and security as drilling and using mounting screws. If you prefer a more permanent installation, it's recommended to consult a professional or consider drilling into your wall or door frame.

Mounting a Ring doorbell on a non-drillable surface

If you live in an apartment or a home with a non-drillable surface, you might think that installing a Ring doorbell is out of the question. However, there are solutions available that allow you to mount a Ring doorbell without drilling. In this guide, we will walk you through the process of mounting a Ring doorbell on a non-drillable surface.

• Assess Your Surface: Start by examining the surface where you want to mount the Ring doorbell. Look for any adhesive-friendly materials or areas where you can securely attach the device.
• Use Adhesive Mounting Tape: One of the easiest ways to install a Ring doorbell without drilling is by using adhesive mounting tape. Make sure to choose a high-quality tape that is strong enough to hold the weight of the doorbell.
• Clean the Surface: Before applying the adhesive mounting tape, clean the surface thoroughly to ensure proper adhesion. Use a mild detergent and water to remove any dirt, dust, or grease.
• Measure and Mark: Use a measuring tape to determine the exact position where you want to mount the Ring doorbell. Mark the spot using a pencil or a piece of masking tape to ensure accuracy.
• Apply Adhesive Mounting Tape: Cut a piece of adhesive mounting tape to the appropriate size and shape to fit the back of the Ring doorbell. Remove the backing from the tape and carefully align it with the marked spot on the surface.
• Press Firmly: Once the adhesive mounting tape is in position, press firmly against the Ring doorbell to create a strong bond. Apply even pressure for at least 30 seconds to ensure proper adhesion.
• Secure the Doorbell: After attaching the Ring doorbell to the adhesive mounting tape, press it against the surface for another minute to strengthen the bond. Make sure it is securely attached before proceeding.
• Connect the Power: Once the Ring doorbell is mounted, connect it to a power source according to the manufacturer's instructions. This could be an existing doorbell wiring or a plug-in adapter.
• Test the Doorbell: After connecting the power, test the Ring doorbell to ensure it is functioning properly. Press the doorbell button and check if you receive notifications on your smartphone or if the chime sounds.
• Adjust the Camera Angle: If needed, adjust the camera angle of the Ring doorbell to get the desired view. This can be done through the Ring app, which allows you to tilt and swivel the camera according to your preferences.

By following these steps, you can successfully mount a Ring doorbell on a non-drillable surface. Remember to choose a reliable adhesive mounting tape, clean the surface thoroughly, and apply even pressure to ensure a strong and secure attachment. Enjoy the convenience and peace of mind that a Ring doorbell provides, even in locations where drilling is not an option.

Hanging a Ring doorbell on a siding without drilling

The Ring doorbell is a popular choice for home security, allowing you to monitor your front door and receive alerts on your smartphone. However, if you live in a rented property or simply don't want to damage your home's exterior with drilling, you might be wondering how to hang a Ring doorbell without drilling.

Luckily, there are a few alternative methods that allow you to securely mount your Ring doorbell on your siding without drilling:

Use adhesive mounting tape:

• Clean the area on your siding where you want to mount the Ring doorbell with rubbing alcohol to ensure proper adhesion.
• Cut a piece of outdoor-rated, double-sided adhesive mounting tape to fit the back of your Ring doorbell.
• Peel off the backing from one side of the tape and firmly press it onto the back of the doorbell.
• Peel off the backing from the other side of the tape and align the Ring doorbell with the desired mounting location on your siding.
• Press the Ring doorbell firmly against the siding for about 30 seconds to ensure a strong bond.

Use a mounting bracket:

• Purchase a mounting bracket designed specifically for Ring doorbells that does not require drilling.
• Clean the mounting area on your siding with rubbing alcohol.
• Attach the mounting bracket to the back of your Ring doorbell according to the manufacturer's instructions.
• Align the mounting bracket with the desired location on your siding and press it firmly against the surface for about 30 seconds.

Use a freestanding mount:

• Purchase a freestanding mount designed for Ring doorbells that can be placed on a flat surface near your front door.
• Follow the manufacturer's instructions to assemble the freestanding mount.
• Place the Ring doorbell onto the freestanding mount and adjust the angle and position as desired.

It's important to note that while these methods do not require drilling, they may not provide the same level of stability as drilling into your siding. Make sure to periodically check the mounting to ensure it remains secure, especially in harsh weather conditions.

Additionally, before using any alternative mounting method, it's a good idea to check with your landlord or read your rental agreement to make sure you won't be in violation of any terms.

Hanging a Ring doorbell on your siding without drilling is a feasible option, thanks to adhesive mounting tape, mounting brackets, and freestanding mounts. Choose the method that best suits your needs and enjoy the added security and convenience of a Ring doorbell without damaging your home's exterior.

Frequently asked questions