
IKEA's Galant series of office furniture has been replaced by the Bekant series, but many people still use the Galant desks. The Galant instructions are complex and cover forty pages, helping consumers assemble any of the thirty-two different configurations. The assembly process can be challenging, and sometimes people lose or forget to take their screws and bolts with them when they move. This can be frustrating as it can be hard to find the right screw or bolt type online or in hardware stores. IKEA will send missing parts if you have a receipt, but if not, there are other options. Some IKEA stores have vending machines where you can buy packs of screws for 10-30 Euro cents, or bins where you can take what you need for free. You can also try going to the help desk and showing them the screw you need. If that doesn't work, you can try hardware stores or online retailers like Amazon or Swedish Furniture Parts.
What You'll Learn
Replacement screws for the Galant tabletop
If you need replacement screws for your Galant tabletop, there are several options you can try.
First, check with your local IKEA store. Some IKEA stores have vending machines that dispense packs of screws for 10-30 Euro cents each. Some stores also have bins with various parts that customers can take for free. If your local IKEA store has an as-is department, you can check their library of parts.
If you can't find the screws you need at IKEA, try taking a screw from another place on the desk and showing it to a hardware store employee to find an equivalent.
If you have the instructions for your tabletop, bring those with you to IKEA or the hardware store, as they may contain part numbers that can help you find the right screws.
If you are unable to find the screws you need in-store, you can try ordering them online. Amazon and Swedish Furniture Parts are two sites that may have the screws you need.
Finally, if you purchased your tabletop new and still have the receipt, you can contact IKEA to request missing parts.
Maf Sensor Screw Size for Your E46 M3
You may want to see also
Where to buy screws and bolts for the Galant desk
If you're looking to buy screws and bolts for your Galant desk, there are a few options available to you.
Firstly, it's worth noting that IKEA will ship most or all spare parts to you for free. You can also visit an IKEA store and ask for the spare parts you need. Some IKEA stores have vending machines for screws, where you can get a pack of 5 screws for 10-20-30 Euro cents. Others have bins with screws and other small parts that you can take for free. If you're unable to find the screws you need this way, you can try asking an employee for assistance.
If you don't have an IKEA store nearby, or you're unable to find the specific screws and bolts you need, you can try purchasing them online. Amazon has been suggested as a source for IKEA replacement screws, and you may also be able to find them on eBay, although they can be expensive. Another option is to take your screws to a hardware store and ask for an equivalent based on the specifications.
IKEA Furniture Assembly: Understanding the Right Bolt and Screw Sizes for ALDIS and LEVELE
You may want to see also
The size of the bolt that goes into the top of the Galant leg
The Ikea Galant desk is a complex piece of furniture to assemble, with many different configurations and parts. The instructions are detailed and specific, with clear diagrams and close-ups to guide the assembler.
The bolt that goes into the top of the Galant leg is a crucial part of the assembly process. This bolt secures the leg to the frame, providing stability and ensuring the desk's integrity. Unfortunately, the specific bolt size or type is not always clear from the instructions or parts list.
In some cases, the bolt may be included as part of the leg package, purchased separately from the frame. This suggests that the bolt is specifically designed for the Galant leg and frame system. However, without clear specifications, it can be challenging to determine the exact bolt size or type.
One source suggests that the bolt may be a Euro Screw with Neck, but it is unclear if this applies to all Galant leg designs. Another source mentions that some Ikea stores have vending machines or bins where customers can purchase or obtain packs of screws and bolts for their furniture. This may be a way to obtain the correct bolt for the Galant leg without having to know the exact specifications.
Additionally, some Ikea stores have an as-is department or service department that stocks various nuts, bolts, and screws. Visiting a physical Ikea store and consulting with their customer service team may be the best way to identify and obtain the correct bolt for the Galant leg.
Sizing a Drive for Your Screw Conveyor: A Comprehensive Guide
You may want to see also
How to attach the legs to the frame
To attach the legs to the frame of an IKEA Galant desk, follow the steps outlined in the IKEA instructions. The instructions are designed to be wordless and feature minimalist images, call-outs, close-ups, and warnings to guide the assembly process. Here is a detailed guide on how to attach the legs to the frame:
- Identify the type of legs you have: angled legs or T-legs. Both kinds of legs are shown in the IKEA instructions to help you position them correctly.
- For angled legs, follow the diagram in the instructions. Position one leg in the corner of the desk and the other two at each of the remaining ends.
- A bolt goes through the frame into the angled leg. There is a small tab on the top of the leg that fits into a hole on the frame.
- For T-legs, orientation is important. Ensure that the two legs on the long side of the desk are parallel to each other.
- Follow the instructions for attaching the legs to the frame. The process may vary depending on the specific model of the Galant desk.
- If you have a right- or left-handed desktop, refer to the instructions for the correct orientation of the legs.
- Depending on your desk configuration, you may need to attach an extension to the frame. This step is necessary for the Galant desks with extensions.
- Use hex-head bolts to attach the frame extension to the main frame, following the close-up diagram in the instructions.
- Pay attention to the details, as the end of the extension that attaches to the legs looks different from the end that attaches to the main frame.
- Once you have positioned the legs and frame correctly, secure them with bolts following the instructions.
By following these steps and referring to the IKEA instructions, you should be able to successfully attach the legs to the frame of your Galant desk. Remember to pay attention to the details and specific requirements of your desk configuration.
Bergara B14 Action Screw: Understanding the Right Fit
You may want to see also
How to attach the frame to the desk
To attach the frame to the desk, you will need eight screws. The size of the screws is not specified, but it is important to use the correct type and size of screws to ensure a secure fit.
First, position the frame on the underside of the desk. Ensure that the frame is correctly aligned with the desk, following the instructions provided by IKEA for your specific desk configuration.
Next, insert the screws through the pre-drilled holes in the desk and into the corresponding holes in the frame. Tighten the screws securely, being careful not to overtighten them, as this may strip the threads or damage the desk surface.
If your desk has a plastic cap covering the open ends of the metal frame, make sure to attach it properly. Use a screwdriver to remove the cap, if necessary, and then snap it back into place securely.
For the Galant corner desk, you may need to drill your own holes in the corner frame where the two pieces of the frame bolt together. You will also need to use a nut at the end of two of the bolts. Additionally, you may need to drill your own holes for the spots where the frame attaches to the tabletop, depending on your specific desk configuration.
Finally, ensure that all screws and bolts are tightened securely, and check that the frame is firmly attached to the desk before proceeding with any further assembly steps.
Understanding Bugle Head Screw Sizes: A Comprehensive Guide
You may want to see also
Frequently asked questions
The standard screw size for the IKEA Galant desk is not known, but it is definitely not an M8 25 screw.
You can try checking your local IKEA store, as some IKEAs have vending machines for screws or bins with various parts that customers can take for free. You can also try contacting IKEA customer service to see if they can send you the missing parts.
Yes, Amazon sells replacement screws and hardware parts for the IKEA Galant desk.
Yes, you can try visiting a hardware store and showing them the screw specifications to find an equivalent screw.
Yes, the IKEA Galant desk assembly may require different types of screws, bolts, and wrenches depending on the configuration of the desk. For example, the T-legs require a special size of hex wrench for height adjustment, while the A-legs are adjusted by hand.