Kylin Rta Maintenance: Grub Screw Sizes Explained

The Vandy Vape Kylin RTA V2 is an upgrade to the original Kylin RTA, which was one of Vandy Vape's most popular tanks. The Kylin V2 features a postless halfpipe-style deck, an updated airflow design, and a new top-filling system. The tank is well-machined, with smooth threading, and includes a Goon-style resin drip tip. The deck has four strong hex screws on each corner, similar to the Phobia V2 RDA, which are used to trap wire during coil building. The size of the grub screws for the Kylin RTA V2 is not explicitly mentioned, however, a similar product, the Arbiter RTA, has grub screws that measure 2.5 X 3mm, with a hex size/driver of 1.3mm.

Vandy Vape Kylin RTA V2's coil-cutting tool

The Vandy Vape Kylin RTA V2s coil-cutting tool is a handy accessory that comes with the Vandy Vape Kylin RTA V2. This tool is designed to help users quickly and easily install coils by indicating the perfect length to cut the coil legs. The tool has a sticker that specifies the recommended coil leg length for the V2's postless deck, which is 7mm.

To use the coil-cutting tool, simply snip the coil legs according to the indicated length. Then, place the coils in the slots on the deck and tighten them in place with the hex screws. The grub screws do a great job of trapping the wire, and the overall process is easy and quick.

The Vandy Vape Kylin RTA V2 is an upgraded version of the original Kylin RTA and Kylin Mini RTA. It features a postless "half-pipe style" deck that accommodates both single and dual coil configurations. The tank has a capacity of 3ml with the straight glass tube and 5ml with the 26mm extension. The device also includes a sliding top-fill mechanism and a Goon-style resin drip tip.

The build quality of the Vandy Vape Kylin RTA V2 is excellent, with smooth threading and precise machining. The wicking process requires some precision due to the slim wicking slots, but once mastered, the tank performs exceptionally well in terms of flavour and vapour production. Overall, the Vandy Vape Kylin RTA V2 is a solid choice for experienced builders and flavour chasers.

Vandy Vape Kylin RTA V2's wicking

Wicking the Vandy Vape Kylin RTA V2 can be a little tricky and may require some trial and error. The wicking slots appear to be rather slim, so it is important to get the right amount of cotton to go through them. You will want to use a good amount of cotton to fill up the coils, but you must cut them at an angle before tucking them into the slots. Fluffing your cotton can help, but it is important not to overstuff the wicking ports.

One user reported experiencing some dry hits when they first started using the Kylin V2, but after some practice, they were able to get the wicking right without any further issues. They recommend not using e-juice with a lot of sweetener, as this can lead to dry hits and wicking problems. It is also important to keep an eye on the e-juice level, as the Kylin V2 does not wick down to the last drop and can start to give dry hits if not filled up in time.

Another user recommends cutting the cotton to just slightly above the base of the wicking ports, thinning it out well to allow the cotton to swell once it is juiced up. They also suggest dampening the wick tails with a little bit of juice before placing them against the wall of the deck. It is important not to squish the wick into place, but rather gently place it where you want it.

Overall, while wicking the Kylin V2 may take some practice, once you get it right, you will be rewarded with a very saturated vape and excellent flavour.

Vandy Vape Kylin RTA V2's performance

The Vandy Vape Kylin RTA V2 is an update to the original Kylin RTA, incorporating elements of the Kylin Mini. It features a postless quad terminal build deck, a revamped airflow system, and advanced juice flow control. The tank has a 24mm diameter and a 3ml standard capacity, with the option to expand to 5ml with an extension glass.

The V2 has a more modern look than its predecessor and offers improved performance. Its build deck is 24K gold-plated and features a quad terminal postless design, with 2mm by 1.75mm diameter terminals secured via side-hex screws. This design allows for a wide range of coil structures and configurations. The wicking area has two large cut-outs on either side of the deck, providing effective wicking saturation.

The airflow system is unique and powerful, with dual external air slots located around the base that redirect air to four internal square air holes. Two of these airflow holes are sloped to create a concentrated, flavour-focused experience. The deck has a bevelled insert that directs the airflow up through the centre of the deck, right beneath the coils. This airflow design contributes to the smoothness of the draw.

The V2 also features a convenient slide-to-open top-fill mechanism, although it does require a bit of force to fully open. The tank comes with a Goon-style resin drip tip and a wider black mouthpiece, as well as a 510 drip tip adapter. It is available in various colours, including matte black, stainless, gold, rainbow, blue, frosted grey, and gun metal.

In terms of performance, the V2 delivers a very saturated vape with warm, condensed, and flavorful vapour, especially in a dual-coil setup. It still performs well in single-coil mode but produces more flavour with two coils. The tank can accommodate coils with a 3.5mm ID. The clouds produced are dense and thick.

The airflow on the V2 is incredibly smooth, providing enough airflow for cloud production while maintaining saturated flavour. It has a slight restrictiveness, even at its widest setting, and the slight restriction is likely due to the deck's narrow airflow slots. Closing off the airflow halfway gives a smooth restrictive lung hit with warm, condensed flavour.

Overall, the Vandy Vape Kylin RTA V2 is a solid RTA, well-constructed, and packed with features. It is recommended for experienced builders and flavour chasers rather than beginners due to the wicking situation, which requires some trial and error to get right.

Vandy Vape Kylin RTA V2's design and build quality

The Vandy Vape Kylin RTA V2 features a postless "halfpipe-style" deck, an updated airflow design, and a new top-filling system that snaps open to reveal a large fill port. The device measures 24 mm in diameter and holds 3 mL with the straight glass tube or 5 mL with the 26 mm extension. It has a low-profile design, allowing coils to sit closer to the mouthpiece. The tank features smooth threading, making it easy to disassemble for cleaning and building. It includes a Goon-style resin drip tip, a wider black mouthpiece, and a 510 drip tip adapter. The sliding top-fill mechanism requires a bit of force to open but makes a satisfying snapping sound. The tank has a small engraved dot to indicate the opening, which can be hard to locate, but the final production model features a more visible arrow on top. The Kylin V2 has a matte black finish and a gear-style textured design.

The V2's deck is cambered-style and U-shaped, similar to a skateboard ramp. It accommodates both single and dual coil configurations, with coils sitting in the center. The deck features four strong hex screws on each corner, similar to the Phobia V2 RDA. The wicking slots appear slim, and wicking requires precision to achieve optimal performance. The tank includes beefy fused claptons, and the coil-cutting tool helps ensure the perfect coil length for this deck. The grub screws effectively trap the wire, making the overall process easy and quick. However, wicking requires some trial and error, and it's important to use the right amount of cotton to avoid dry hits, spitback, and leakage.

The Kylin V2 performs exceptionally well in dual-coil mode, producing dense and thick clouds. The airflow is incredibly smooth, providing ample airflow for clouds while maintaining saturated flavor. The deck has a bevelled insert that directs airflow up through the center, beneath the coils. This insert appears to be made of ceramic, but Vandy Vape has not confirmed the material. The airflow design contributes to a smooth and restrictive lung hit. The tank can accommodate coils with a 3.5 mm ID, but it's best not to go bigger despite its large chimney.

Overall, the Vandy Vape Kylin RTA V2 is a well-constructed device that offers solid performance, particularly for flavor chasers and experienced builders. It provides a nice overall value, and its low-profile design, improved performance, and modern look make it a worthwhile upgrade for owners of the original Kylin RTA.

Vandy Vape Kylin RTA V2's top-filling system

The Vandy Vape Kylin V2 RTA features a nifty slide-out top-filling system for easy refills. The tank has a capacity of 3.5ml or 5ml, depending on the model, and can be expanded to 6ml using the included chimney extension and extended glass section. The top cap has knurling, which makes it easy to adjust the airflow control ring, juice flow control ring, and remove the cap for filling. The Kylin V2 RTA has a diameter of 24mm and is constructed from stainless steel and Pyrex glass. It features a bottom bevelled air intake and cambered surface air outlet for improved flavour and vapour production. The internal airhole and bevelled bottom air intake design create a smooth vaping experience. The tank also comes with a bulb glass tube to hold a maximum of 5ml of e-juice.

The Vandy Vape Kylin V2 RTA has a unique cambered deck that can accommodate both single and dual coils. The build deck is 24K gold-plated and features a quad terminal postless design with terminals measuring 2mm by 1.75mm in diameter, which are tightened via side-secured Hex screws. The lack of posts frees up build space, allowing for a wide range of coil structures and complex configurations. The wicking area features two large cut-outs on the side of the deck, providing effective wicking saturation.

The airflow system on the Vandy Vape Kylin V2 RTA is truly unique and powerful. Air enters through dual external air slots located around the base and is funnelled into four squared air holes, with two of the airflow holes in a sloped orientation to create a concentrated, flavour-focused experience. The rebuildable tank atomizer has a beveled internal airflow design and a 510 drip tip adapter. The Kylin V2 RTA offers adjustable juice flow control and dual external adjustable airflow.

The Vandy Vape Kylin V2 RTA is a great choice for experienced vapers and flavour chasers. While it may take some trial and error to get the wicking just right, once you do, the tank provides a very saturated vape with warm, condensed, and flavorful vapour, especially with a dual-coil setup. The airflow is incredibly smooth and provides enough airflow for clouds while maintaining a flavourful vape. The Kylin V2 RTA is a solid upgrade for those who already own the original Kylin RTA, offering a more modern look and improved performance.

Frequently asked questions