Understanding Lto Plate Screw Sizes: Standardization And Fit

The Land Transportation Office (LTO) in the Philippines has implemented a new security feature for license plates, which includes special screws that are difficult to remove without authorization. The new LTO license plates are designed to be tamper-resistant, with screws that require a specific tool to remove. This security measure aims to prevent unauthorized removal and deter license plate-related crimes. The LTO's No Registration, No Travel policy emphasizes the importance of having a valid license plate to avoid fines and vehicle impoundment. While the security screws enhance safety, they can pose challenges for car owners who need to detail their vehicles or make repairs that require license plate removal. Obtaining replacement screws and following the proper procedures for legal removal and reinstallation are essential to stay compliant and maintain the security of the license plate system.

LTO security bolts/screws are illegal to remove without authorisation

LTO security bolts and screws are designed to prevent tampering, theft, or unauthorized access. They feature a unique design that requires specialized tools for installation and removal. While these security measures are essential, it's important to understand the legal implications of removing them without authorization.

In the context of LTO plate screw size, it is important to note that these security bolts and screws are subject to specific regulations. Removing them without authorization from the Land Transportation Office (LTO) is considered illegal. This means that even if you have good intentions or valid reasons for removing the screws, such as detailing your car or repainting your bumper, you must first seek permission from the LTO.

The process of legally removing and replacing LTO security screws typically involves contacting the LTO and following their instructions. It may include purchasing a new set of screws directly from them. However, this process can potentially be time-consuming, as there may be delays or supply issues.

To avoid any legal repercussions, it is crucial to prioritize obtaining authorization before attempting to remove or replace LTO security bolts and screws. While it may be tempting to take matters into your own hands, doing so could result in fines or other penalties. Therefore, it is always recommended to follow the proper procedures and work with authorized personnel to ensure compliance with the law.

In summary, while the security bolts and screws on LTO plates serve an important purpose, they can also present challenges for vehicle owners who need to access certain parts of their cars. By understanding the legal implications and following the correct procedures, you can ensure that any necessary modifications are made safely and within the boundaries of the law.

Installation instructions for LTO security bolts/screws

The Land Transportation Office (LTO) in the Philippines has introduced new-design license plates with a so-called security-bolt feature. The following instructions will guide you through the process of installing these security bolts or screws on your vehicle's license plate.

Tools and Materials:

• Existing bolts or new security bolts/screws (M6 x 16mm)
• Flat washer
• Lock washer (slitted washer)
• Nut
• 10mm wrench
• Drill (if new holes need to be created)

Installation Process:

• If you are replacing an existing license plate with a new one, you may need to use pliers or a vise grip to carefully remove the old bolts or screws.
• For the installation of the new LTO security bolts/screws, you can use the existing holes in your car or drill two holes of 6.5mm each.
• Place the flat washer on top of the license plate, and insert the bolt through the hole.
• Insert the lock washer (slitted washer) onto the back side of the bolt.
• Fit the nut onto the bolt and tighten it by hand.
• Using a 10mm wrench, tighten the bolt further until the head breaks off.

By following these steps, you will securely install the LTO security bolts/screws for your license plate, ensuring that your vehicle complies with the latest regulations.

Please note that tampering with or removing these security bolts without authorization from the LTO is illegal. If you need to remove the bolts for repairs or other legitimate reasons, you may need to obtain new bolts from the LTO and follow the above installation process again.

Temporary LTO plates are allowed while waiting for a permanent plate

The Land Transportation Office (LTO) has released guidelines on the use of temporary and improvised plates, standardizing their size, appearance, and format. These guidelines are meant to address the issue of plate shortages, which has caused frustration among vehicle owners who have been waiting months or even years for their permanent plates.

Temporary plates are typically issued by dealerships to new vehicle owners until they receive their actual physical license plates. These plates use the assigned plate number of the newly registered vehicle. If there is no assigned plate number, the Conduction Sticker number or MV File Number is used instead. Temporary plates do not require authorization from the LTO, and the responsibility for their use falls on the dealership for new vehicles and the vehicle owner for previously registered vehicles.

Improvised plates, on the other hand, are used by vehicle owners who are waiting for a replacement for their lost or mutilated license plates. Unlike temporary plates, improvised plates require authorization or a permit from the LTO. Vehicle owners must report the loss or damage and secure authorization to use improvised plates while waiting for their replacements.

The dimensions of temporary and improvised plates differ depending on the type of vehicle. For motor vehicles, the plates must measure 390mm in length and 140mm in width, while for motorcycles, the plates should be 230mm long and 127mm wide. The LTO guidelines also specify font colors for different types of vehicles: black for private vehicles, red for government vehicles, blue for diplomatic vehicles, and green for hybrid and electric vehicles.

It's important to note that the use of temporary and improvised plates is only a temporary solution until the permanent plates are issued. The LTO has provided specifications for these temporary plates to ensure uniformity and ease of recognition for law enforcement and other motorists.

LTO plate sizes for motor vehicles and motorcycles

The Land Transportation Office (LTO) in the Philippines has specific requirements for license plates for motor vehicles and motorcycles. The LTO has implemented a range of measures to address the backlog in issuing official license plates, including guidelines for the use of temporary and improvised plates.

Motor Vehicles

For motor vehicles, the LTO specifies that temporary and improvised plates must measure 390mm in length and 140mm in width, or roughly 15.4 inches by 5.5 inches. The text on these plates should be in Arial Black and Arial Bold fonts, with the font size specified in millimeters.

The format and appearance of these plates depend on the vehicle type and available information. For example, for a new registration with an assigned plate number, the plate should include the plate number in Arial Black, 39mm height, dealer information in Arial Black, 11mm height, and the label 'Temporary Plate' in Arial Black, 13mm height.

Motorcycles

For motorcycles, temporary and improvised plates must measure 230mm in length and 127mm in width, or roughly 9.2 inches by 5 inches. The text on these plates should be in Arial Narrow Black font.

Similar to motor vehicles, the format and appearance of motorcycle plates depend on the registration status and other factors. For a new registration with an assigned plate number, the plate should include the label 'Registered' in Arial Narrow Bold, 15mm height, the plate number in Arial Narrow Bold, 40mm height, the place of registration, dealer, and the label 'Temporary Plate' in Arial Narrow Bold, 13mm height.

Colors

The LTO has also specified colors for temporary and improvised plates, depending on the type of vehicle:

• Black font for private vehicles
• Red font for government vehicles
• Blue font for diplomatic vehicles
• Green font for hybrid and electric vehicles
• Yellow for vehicles for hire (actual license plates use black font on yellow material)

LTO plate design and layout specifications

The Land Transportation Office (LTO) has released official specifications for temporary conduction-based license plates. These plates are to be used in lieu of the official metal license plates, which have been in short supply for several years. The LTO has outlined specific guidelines for both improvised plates and temporary plates, with the latter being manufactured by accredited dealerships for their customers.

Improvised plates are temporary solutions created by vehicle owners while awaiting a replacement for a lost or damaged plate. Motorists must obtain an "Authorization to Use Improvised Plate" from the LTO before using such plates. These plates must be made from reflective sturdy material and use Arial Black as the font.

The LTO-issued memorandum includes detailed specifications for the design and layout of temporary plates for both motor vehicles and motorcycles. The focal point of the motor vehicle temporary plate is the conduction sticker (CS) number, accompanied by the word "REGISTERED" and the name of the dealership. The region where the plate was registered and the Motor Vehicle File Number must also be indicated. The LTO has specified the complete measurements, spacing between lines, and font sizes for these plates. For instance, the CS number in cars should be in 160-point Arial Black font, while motorcycles use a 90-point font size.

The LTO's order aims to curb the use of unregistered motor vehicles and ensure compliance with their mandate under RA 4136. The Motor Vehicle (MV) File Number serves as a clear indication that all fees are paid and the vehicle has been duly registered and encoded with the LTO. Dealerships are responsible for manufacturing these temporary plates and ensuring adherence to the specified standards.

Frequently asked questions