
Mazda owners and enthusiasts have been discussing the size of the screw-in tow hook needed for different models of the car. The consensus is that the thread size varies depending on the model of the car and its year of manufacture. For example, the Mazda 3 tow hook thread size is reported as M18 X2.50, M16 x 2.0, and M20 x 2.5. The Mazda MX-5 Miata 2016-up tow hook thread size is reported as M20 x 2.5. The Mazda CX-30 tow hook thread size is reported as M16x2. It is recommended to contact Mazda directly to purchase the correct tow hook for your car model and year.
What You'll Learn
Mazda 3 tow hook thread size
The tow hook thread size for a Mazda 3 depends on the model year of the car. For Mazda 3 models between 2013 and 2017, the tow hook thread size is M20 x 2.5. For the 2016 model, the thread size is 20 x 2.5 mm. The 2009 model has a thread size of M16 x 2.0.
It is recommended to use an authorised Mazda repairer or a commercial tow-truck service for towing. This is to prevent any damage to the vehicle. If you are looking to buy a new tow hook, you can contact Mazda directly or look for third-party options.
There are a variety of options available for tow hooks, including those made from billet aluminium alloy with a red coating. These hooks are designed to screw directly into the front bumper of your car, with no modifications required. When purchasing a tow hook, ensure that the thread pitch, pattern, and size are compatible with your Mazda 3.
It is important to note that some tow hooks are designed for decorative purposes only and may not be suitable for actual towing. Always refer to the manufacturer's instructions and your vehicle's specifications to ensure safe and proper use.
Guitar Neck Screw Hole Size: What You Need to Know
You may want to see also
Mazda 6 tow hook thread size
The tow hook thread size for a Mazda 6 depends on the year of manufacture. For Mazda 6 models from 2014 to 2015, the tow hook thread size is M20 x 2.5. This is a specialised size, and you will need to contact Mazda directly to purchase the correct tow hook.
For the 2018-2021 Mazda 6, the front bumper tow hook license plate mounting bracket holder has a thread size of M20 x 2.5.
The 2014-2015 Mazda 6 tow hook is compatible with the Mazda 3 of the same year, which has a thread size of M18 x 2.50, according to some sources.
It is important to note that the tow hook thread size may vary depending on the specific model and year of your Mazda 6. It is always best to consult the vehicle's owner's manual or a Mazda dealership for the most accurate information regarding tow hook thread size and installation.
Understanding Hex Washer Screw Sizes: A Comprehensive Guide
You may want to see also
Mazda Miata tow hook thread size
The tow hook thread size for a Mazda Miata depends on the model year of the car.
For the fourth-generation MX-5 Miata, or the ND (2016+), the thread size is M20 x 2.5. This is the same for the NC and all Mazda vehicles. The thread size for the ND Miata is the same as that of the 2019 and 2021 models, as well as other Mazda models.
For the Mazda3, the tow hook thread size is M16 x 2.0 for the 2004-2009 models. For the 2017 model, the thread size is M18 x 2.5.
The Mazda CX-30 has a tow hook thread size of M16x2, according to a customer service representative from Sickspeed. However, another forum user claims that the threaded holes in the bumpers of the CX-30 are not for tow hooks but for hold-down hooks during vehicle transport.
The 2006-up Mazda MX5 Miata uses a tow hook with M16 x 2.0 threading.
Tekonsha Voyager: Screw Size and Mounting Guide
You may want to see also
Mazda tow hook thread size for towing vs tie-down
Mazda tow hook thread sizes vary depending on the model of the car. For example, the thread size for the 2004-2009 Mazda 3 is M16 x 2.0, while the thread size for the 2014-2015 Mazda 3 is M18 x 2.5. The Mazda CX-30 has a tow hook thread size of M16x2, and the ND Miata has a thread size of M20 x 2.5.
It is important to note that the tow hooks are not meant to bear the weight of the car and should not be used for towing. Instead, they are intended for tie-down purposes during shipping. Using them for towing can damage the car's frame. Mazda does not recommend using the tow hooks for anything other than their intended purpose.
Some Mazda owners have reported that they did not receive tow hooks with their cars, and that the tow hooks are not available at local Mazda parts stores. However, tow hooks for Mazda vehicles can be purchased online from retailers like Amazon and speciality stores. When purchasing a tow hook, it is important to ensure that the thread size matches your specific Mazda model.
It is always recommended to refer to the owner's manual and consult with a certified mechanic or a Mazda dealership for specific instructions and guidelines related to your vehicle's tow hook usage and thread size.
Understanding the Standard Screw Hole Size for Commercial Electric Mounting Bases
You may want to see also
Mazda tow hook thread size for different models
The thread size for tow hooks varies across different Mazda models. For example, the thread size for the 2014-2018 Mazda 3 Skyactiv is M18 x 2.5, while the thread size for the 2004-2009 Mazda 3 is M16 x 2.0. Similarly, the thread size for the 2012 Mazda 3 is M18 x 2.5, and the 2020 Mazda MX-5 Club has a thread size of M20 x 2.5.
It is important to note that the tow hook thread size may differ between regions. For instance, the 2016 Mazda CX-5 sold in the UK comes with a front and rear towing eye, while the US version does not include a tow eye as standard.
When determining the correct thread size for a tow hook, it is essential to consider the specific Mazda model and year, as well as the region where the vehicle was purchased. This information can be used to search for the appropriate thread size in online forums or by consulting a Mazda dealer or mechanic.
In some cases, universal tow hooks or aftermarket solutions may be available that fit multiple Mazda models or vehicles from other manufacturers. However, it is always recommended to verify the compatibility and thread size before purchasing or installing a tow hook to ensure a safe and secure fit.
IKEA Crib Allen Screw: What Size Do You Need?
You may want to see also
Frequently asked questions
The tow hook thread size for a 2017 Mazda 3 is M18 x 2.5.
The tow hook thread size for a 2016 Mazda 3 is M20 x 2.5.
The tow hook thread size for a 2014 Mazda 3 is M20 x 2.5.
The tow hook thread size for a Mazda CX-30 is M16 x 2.