Feet Screw Size For The Ncase M1: A Guide

The Ncase M1 is a small form factor PC case. Users have discussed the screw size of the feet of the case on forums, with some seeking replacements for the stock feet screws. The screw gauge is M3, and the screws are approximately 0.40mm. The stock foot screws are too short to fit through the case for some users who have purchased aluminium speaker feet.

Replacement feet for the NCASE M1 are available to buy online

Etsy offers 3D-printed human feet for the NCASE M1, which are 18mm tall and come in black or white. They are priced at 181.55 DKK for the short feet and 317.72 DKK for the longer legs.

Aliexpress sells solid aluminium speaker isolation stands that can be used as replacement feet for the NCASE M1.

Mnpctech offers custom case feet for the NCASE M1, CNC-machined from 6061 aluminium. Each foot has a 3/4" thick hard rubber insert to protect your desktop or workstation. They measure 1" (25.4mm) in diameter and 5/8" (15.8mm) in height. The set includes four M3 thread screws for mounting and is priced at $49.99.

The NCASE M1's stock foot screws are too short for some replacement feet

One user on Reddit reported that the stock foot screws on their M1 V5 were too short to fit their new aluminium speaker feet. They suspected that the screws were M3 and around 0.40mm, but they were unable to confirm without a caliper. Another user on the same platform also inquired about the screw size for the NCASE M1 V6, as they wanted to install taller feet.

It is important to note that not all replacement feet will have this issue. Some users have reported success with speaker feet from AliExpress, which may have a different screw size or threading that accommodates the stock foot screws. Additionally, custom case feet options are available from vendors like Mnpctech, which include longer screws specifically designed for the NCASE M1. These custom feet are CNC-machined from 6061 aluminium and come with four M3 thread screws for mounting.

If you are considering replacing the feet on your NCASE M1, it is recommended to carefully measure the screw size and length required for your new feet. This will ensure that you have the necessary screws on hand to secure the replacement feet properly. You may need to purchase longer screws or make other modifications to ensure a secure fit, depending on the design of the replacement feet you choose.

The screw gauge on the stock foot screws is M3

The screw gauge on the stock foot screws of the NCASE M1 is M3. This information will be useful if you are looking to replace the stock foot screws with longer ones or if you are considering purchasing custom case feet.

If you are looking to replace the stock foot screws with longer ones, you will need to know the size and pitch of the screws. The size of the screws is M3, which is the diameter of the screw thread. The pitch of a screw refers to the distance between the threads and is typically measured in millimetres. This information can be found using a screw pitch gauge or a thread pitch gauge.

If you are considering purchasing custom case feet for your NCASE M1, it is important to ensure that the feet come with the appropriate screws for mounting. Custom case feet for the NCASE M1 are available in both silver machined aluminum and black anodized finish. The black anodized finish is similar to the finish on some Cooler Master ITX, MATX, Lian Li, and Silverstone Cases. These custom case feet are CNC machined from 6061 aluminum and come with four M3 thread screws for mounting.

It is important to note that the stock foot screws on the NCASE M1 are designed to fit the original case feet. If you are planning to replace the case feet with taller or custom feet, you may need longer screws. In this case, knowing the size and pitch of the stock foot screws will help you select the appropriate replacement screws.

Additionally, when replacing the case feet or screws, it is recommended to handle the case with care to avoid any damage to the other components of the NCASE M1.

The NCASE M1's stock foot screws may be 0.40mm

If you are looking to replace the stock feet of your NCASE M1 with taller ones, you can purchase replacement feet online. These replacement feet are designed to be a straight swap for the stock feet and are available in different colours and finishes. They usually come with the necessary screws for mounting, and some retailers offer different screw sizes to accommodate your specific needs.

Additionally, you can find 3D-printed custom human feet for the NCASE M1 on Etsy, which are designed to be funny and functional. These feet are 18mm tall and come with mounting screws. The installation process is straightforward and involves removing the stock rubber pads, inserting the provided screws into the 3D-printed feet, and then attaching them to the case.

It is important to note that the NCASE M1 ITX chassis is made in Lian Li's factory and is a crowd-funded specialty small form factor computer case designed to save space on your workstation.

The NCASE M1 v6.1 has a slightly uneven bottom surface

Alternatively, you can purchase custom-made NCASE M1 replacement feet that are specifically designed to fit the v6.1 model. These replacement feet are available from various sources, including online retailers and 3D printing services. When purchasing replacement feet, ensure that they come with the necessary screws for mounting, as the stock foot screws may be too short.

It is worth noting that the replacement feet options may vary in height compared to the original feet. Some options might be slightly taller, which could impact the overall dimensions of your case and potentially affect the airflow or thermals. Therefore, it is essential to carefully consider your requirements and measure the available space before selecting replacement feet for your NCASE M1 v6.1.

Additionally, if you are looking for a cost-effective solution, you can explore the option of using regular rubber feet from a hardware store or purchasing speaker feet, which some users have found to be a suitable alternative. These options may require modifications, such as drilling new holes or adjusting the screw threads, but they can provide a more affordable solution for levelling your NCASE M1 v6.1.

Frequently asked questions