Screw Sizes For Your Water Bottle Cage

If you're looking to attach a water bottle cage to your Nishiki mountain bike, you'll need to know the size of the bolts required. The bolt size for a water bottle cage on a Nishiki mountain bike is M5, or 5mm x 0.8. This is a common metric size, and you should be able to find these bolts at any bike shop or hardware store.

The bolt size for a Nishiki water bottle cage is M5

M5 bolts have a head diameter of 8.5mm and a head height of 5mm. They require a 4mm Allen key. Bolts up to 25mm in length are fully threaded, while bolts longer than 25mm have 22mm of thread.

When installing an M5 bolt on your Nishiki water bottle cage, it is recommended to apply a small amount of grease to the threads first.

M5 bolts are typically made of stainless steel or aluminum. Stainless steel options include 18-8 (304) and 18.8, while aluminum bolts are often anodized and used for aesthetic purposes.

It is important to note that aluminum bolts should not be used in structural applications.

M5 is the most common metric size for bike bottle cages

If you're looking to attach a water bottle cage to your bike, you'll need to know the correct screw size. The standard bottle cage has two mounting holes, 64mm apart, to match the threaded holes in the frame. The correct screw size will depend on the specific cage and bike, but there are some common sizes to be aware of.

M5 bolts are the most common metric size for bike bottle cages. This means the bolt has a diameter of 5mm and a thread pitch of 0.8mm. You can find these bolts at any bike shop or metric-aware hardware store. When purchasing, be sure to bring your cage and bike along to ensure a proper fit.

It's important to note that the size of the wrench you use does not determine the size of the bolt. Bottle cages typically use M5 bolts, even if an M4 wrench is needed for tightening. So don't be confused by the tools you use to tighten the bolts—always measure the bolts themselves to determine their size.

Additionally, when measuring a bolt, it's best to use calipers and a thread checker. However, you can probably get away with using a metric ruler. The bolt size is determined by measuring the diameter of the shaft in millimetres. The bolt length is measured from the end of the threads to the bottom of the bolt head, excluding the head itself.

While M5 is the most common size for bike bottle cages, there are other sizes to be aware of as well. M4 and M6 bolts are also used in some cases, so it's always best to measure and check before purchasing.

Now that you know the correct screw size for your water bottle cage, you can confidently attach it to your bike and hit the trails, staying hydrated along the way!

M5 bolts are available at bike shops and hardware stores

If you're looking for M5 bolts to fix your water bottle cage to your Nishiki mountain bike, you're in luck! M5 bolts are widely available at bike shops and hardware stores. They are one of the most common metric sizes, so you should have no trouble finding them.

Bike shops will definitely stock M5 bolts, and you can also try metric-aware hardware stores. You can also buy them online from retailers like Amazon and Bicycle Parts Warehouse.

When purchasing M5 bolts, you'll want to make sure you get the right length and head type for your specific application. The standard length for water bottle cage bolts is 15mm, but you may need a different length depending on the exact cage and bike frame you have. The head type refers to the shape of the top of the bolt, and common types include Allen key head and T25 Torx. It's important to get the right length and head type to ensure a secure fit for your water bottle cage.

In addition to M5 bolts, you may also need washers and grease. Washers are thin pads that go between the bolt head and the cage to distribute the pressure more evenly and prevent damage. Grease is applied to the threads of the bolt to create a smooth, tight connection and make it easier to remove the bolt in the future if needed.

Remember to check the specific requirements for your bike and cage, and always follow the manufacturer's instructions for the best results.

M5 x 15mm bolts are used for Wolf Tooth water bottle cages

M5 bolts are also used for the Nishiki water bottle cage. This was confirmed in a Google Groups discussion from 2003, where a user asked about the bolt size for a Nishiki water bottle cage. Another user replied that the bolt size is 5 mm x 0.8, also known as "M5". They also mentioned that these bolts are commonly available at bike shops and hardware stores.

M5 x 15mm bolts are available in various materials and finishes, such as titanium with a rainbow oil slick finish or stainless steel with a zinc-plated finish. These bolts can be purchased from online retailers and hardware stores.

Allen screws are commonly used for bike bottle cages

When purchasing screws, it is important to consider the threading in addition to the diameter. M5 screws have a thread pitch of 0.8mm, which means there is one thread per 0.8mm. This is a finer thread than an M5 x 1mm bolt. It is also important to note that the hex key used to turn the screws will be smaller than the diameter of the screw.

Some bike water bottle cages come with screws and an Allen wrench for installation. It is recommended to apply a small amount of grease to the threads before installing the screws. The length of the screws will depend on the specific cage and bike frame, but they typically range from 10mm to 16mm.

It is important to ensure that the bike frame has threaded holes for the installation of bottle cages. If the frame does not have threaded holes, hose clamps can be used as an alternative installation method.

Frequently asked questions