Pearl Mimic Pro: Mounting Bracket Screw Size Guide

The Pearl Mimic Pro mounting bracket screw size is 10/32. The Pearl PEMM Module Mount comes with four mounting screws included. The mount is designed for the Pearl Mimic Pro, as well as the Pearl R.E.D. Box and malletSTATION. The mount features a heavy-duty, four-hole design with a 7/8 diameter post. Pearl recommends the RDMM mount plate, which also comes with screws included.

The Pearl PEMM module mount

While the Pearl PEMM module mount is a great option, it is important to note that some users have reported issues with the included screws. Some reviews mention that the screws are too long, have the wrong threads, or get hung up on the way in. It is recommended to source shorter screws or washers to address these issues.

Mounting screws for Pearl Mimic Pro

The Pearl Mimic Pro is an electronic drum module that can be mounted on a stand or rack using a module mount. Pearl's official module mount is the Pearl PEMM (formerly known as the RDMM), which comes with two types of mounting screws, including some designed specifically for the Mimic Pro. The mount features a heavy-duty cast aluminium construction and a 7/8" diameter post. The screw size is 10/32".

The Pearl PEMM module mount is designed to fit the Mimic Pro, as well as the Pearl r.e.d.Box sound module and the EM1 malletSTATION. It features a four-hole mount with screws included. The integrated down tube mounts the device to any standard 7/8" rack clamp or drum stand.

Some users have reported issues with the included mounting screws, stating that they are too long and have the wrong threads. It may be necessary to source alternative screws or use washers to mount the module correctly.

If you are using a different mounting plate, such as the ROLAND mounting plate, the included screws may not fit, and you will need to source alternative screws. For example, one user reported that they purchased suitable screws from Amazon.de, which also may be available on Amazon UK.

Screw size: 10/32 in

The Pearl Mimic Pro mounting bracket requires four 10/32-inch screws. The Pearl PEMM Electronic Drum Mount is designed to mount the Pearl Mimic Pro, with a four-hole mount that fits most electronic drum modules. The mount features heavy-duty cast aluminium construction and a 7/8-inch diameter post. The Pearl Mimic Pro Module Mount is made of heavy-duty black plastic and also uses 10/32-inch screws. This mount is designed to easily and comfortably mount your R.E.D. Box and Mimic Pro electronic drum controllers.

The RDMM mount plate

While the RDMM mount plate typically includes the required mounting screws, some users have reported issues with the length of the screws. It is important to ensure that the screws are no longer than 0.5" (12.5mm) to avoid any interference with the motherboard. Some users have opted to purchase alternative screws that better fit their specific module.

Overall, the RDMM mount plate is a convenient and dependable solution for drummers looking to securely mount their sound modules. It is compatible with a range of modules, including those from Pearl and Roland, and comes with the necessary mounting hardware for a straightforward installation process.

drum-tec screws for the Pearl Mimic Pro

If you are looking for a mounting solution for your Pearl Mimic Pro sound module, drum-tec offers a set of four holding plate screws that fit the bill. These screws are based on imperial measurements and are compatible with the Pearl Mimic Pro sound module.

The drum-tec screws for the Pearl Mimic Pro are designed to securely hold your sound module in place. With these screws, you can be assured that your Pearl Mimic Pro will be safely mounted, providing a stable foundation for your electronic drum setup.

One of the key advantages of the drum-tec screws is their compatibility. These screws are specifically designed for the Pearl Mimic Pro sound module, ensuring a perfect fit. The set includes all four screws needed for mounting, making it a complete solution right out of the box.

In terms of measurements, the drum-tec screws are based on imperial standards. This means that they follow the standard measurements commonly used in the United States and some other countries. By adhering to these standards, the screws provide a consistent and familiar sizing for those who are accustomed to working with imperial units.

If you're looking for a reliable and compatible mounting option for your Pearl Mimic Pro sound module, the drum-tec screws are an ideal choice. With their specific design and compatibility, you can ensure a secure and stable setup for your electronic drums.

Frequently asked questions