Understanding Rog Phone's Ally: Screw Sizes For Upgrades

The ROG Ally is a handheld gaming console created by ASUS/ROG. The ROG Ally and ROG Ally X allow users to play games on the go, with the option to upgrade storage through a microSD card or by swapping in a new SSD drive. To open the device, a Phillips-head screwdriver is required. The screw sizes for the exterior shell are m2 x 16mm for the 5 screws around the edges and m2 x 10mm for the middle bottom screw.

ROG Ally Screw Size Characteristics

Screw size for the ROG Ally SSD

To upgrade the SSD on your ROG Ally, you'll need a size 0 Phillips head screwdriver. This is specified on the ASUS website, although some users have reported that they needed a PH1 screwdriver to remove the SSD screw.

The ROG Ally uses six screws to secure the back panel. The thread is M2, with five long screws sized M2 x 16mm, and the middle bottom screw sized M2 x 10mm.

If you're replacing the SSD, you'll need to remove the screw holding the drive in place. This is likely a PH1 screw, as reported by one user.

It's important to have the correct screwdriver when working with these small screws, as using the wrong size can strip the screws.

Screwdriver size for the ROG Ally

To open your ROG Ally, you will need a small Phillips-head screwdriver. Specifically, a size 0 Phillips-head screwdriver is recommended by the official ROG website. However, some users have reported using a PH0 screwdriver for the back plate screws and a PH1 screwdriver for the SSD screw.

The ROG Ally uses M2 screws of varying lengths. The 5 long screws on the exterior shell are M2 x 16mm, while the middle bottom screw is M2 x 10mm. The screw thread is M2, so you can identify the length of any other screws by measuring the length of the threads in millimetres. For example, if the thread length is 16mm, the screw size is M2 x 16.

You can purchase replacement screw kits for the ROG Ally online. These kits include screws in 4 different sizes, with some kits containing up to 24 or 40 screws. It is important to use original screws to ensure the safety and stability of your device. When purchasing replacement screws, make sure they are specifically designed for the ROG Ally to ensure compatibility.

When working with screws, it is essential to have the correct screwdriver size. Using a screwdriver that is too small or too large can strip the screw head, making it difficult to remove or replace the screw. It is also important to apply the correct amount of force when turning the screwdriver. Applying too much force can damage the screw or the device, while applying too little force may result in the screwdriver slipping and not turning the screw.

Back cover screw size

The screw size for the back cover of a phone is an important detail when it comes to repairs or modifications. Let's take a look at the back cover screw size for some of the ROG Phone models:

ROG Phone 3

The ROG Phone 3 is a popular model, and while I couldn't find specific details on the back cover screw size, there are various replacement back covers available. These covers protect the camera and support Aura lighting for an enhanced visual experience.

ROG Phone 5

For the ROG Phone 5, there are protective cases available that shield the phone from scratches and bumps. While these cases don't specify screw sizes, they do offer protection and a non-slip grip.

ROG Phone 6

The ROG Phone 6 back cover glass is available for purchase, measuring 173 x 77 x 10.3 mm (6.81 x 3.03 x 0.41 in). This back cover glass includes an ROG logo and is designed to fit the ROG Phone 6 model snugly.

ROG Phone 6 Pro

The ROG Phone 6 Pro is also equipped with a back cover glass option, featuring the same dimensions as the standard ROG Phone 6. This back cover glass comes with the option of an ROG or Tencent logo.

While I wasn't able to find specific screw size details for the back covers of these ROG Phone models, the available replacement parts and protective cases offer a range of options for customization and repair.

Joystick circuit board screw size

The ROG Ally is a handheld gaming console made by ASUS, released in 2023. The screw sizes for the exterior shell are m2 x 16mm for the 5 screws around the edges and m2 x 10mm for the middle bottom screw.

Now, for the joystick circuit board screw size, it depends on the joystick model and the thickness of the board or panel you are mounting it to. For example, the "Easyget Chinese Sticks" and "SANWA JLF Joystick" have a hole diameter of 6mm, which means the upper limit of the screw diameter is <6mm. A #10-32 screw is the appropriate size for this joystick model.

For a joystick with a 3/4-inch thick board, a 2" screw length should be plenty, and a number 10 screw with a washer is recommended. If your board is only 1/2" thick, a 7/8" screw length is long enough.

For installing a joystick onto a control panel, a #8 x 3/8 wood screw is recommended.

Battery screw size

To replace the battery in your Asus ROG Ally, you will need a Phillips #00 screwdriver to remove the four screws securing the battery. These are:

• Two 9.6 mm-long screws near the centre of the top edge.
• One screw near the left speaker with a warning sticker.
• Two 3.4 mm-long screws at the left and right edges.

The battery is held in place by a metal locking bar, which you will need to unlatch using a spudger. The battery cable will also need to be removed, so take care to secure the battery cells and use a spudger to push the connector out of its socket.

When installing a new battery, ensure the cable is passed through the opening in the backplate. The connector head will need to be turned 180 degrees so the small white tabs face towards the mainboard. Push down on the base of the battery pack until you hear a click, and check that the case clips are engaged against the battery clips.

Finally, carefully connect the battery connector and slide the metal bracket into its locked position. You can replace five of the original six screws used to secure the backplate, and use two of the screws from the original battery pack for extra security.

The ROG Ally will not power on after the battery has been disconnected without mains power, so be sure to plug it in to test the new battery.

Frequently asked questions