The Ultimate Guide To Rolex Bracelet Screw Sizes

rolex bracelet screw size

Rolex bracelet screw sizes vary depending on the model. For example, the screw size for the Rolex Oyster bracelet is 1.6mm, while the screw size for the Presidential and Jubilee bracelets is smaller at 1.4mm. The Rolex Submariner, GMT, Daytona, Explorer, Air King, Sea Dweller, and Oyster Perpetual models with 19mm lugs and 3.20mm link thickness require screws that are 1.70mm thick and 13.70mm long. It is important to verify the screw size before making any purchases or adjustments to your Rolex bracelet.

shuntool

Screwdriver sizes for Rolex bracelets

When adjusting the links on a Rolex bracelet, it is important to use the correct type and size of screwdriver. Using the wrong tool can damage the screw and the bracelet.

Types of Screwdriver

For Rolex bracelets, it is recommended to use a screwdriver with parallel-flanks blades. Hollow-ground screwdrivers are also suitable.

Screwdriver Sizes

The size of the screwdriver you need will depend on the type of Rolex bracelet you have.

For Oyster bracelets, a 1.6mm screwdriver is typically used. However, some Oyster bracelets may require a 1.7mm screwdriver.

Presidential and Jubilee bracelets have smaller screws than the Oyster bracelets, with a size of about 1.4mm.

To ensure you have the correct screwdriver size, it is recommended to use the largest one that completely fits within the screw head without being too wide.

Where to Buy

Screwdrivers for Rolex bracelets can be purchased from various online retailers, such as Amazon, Aliexpress, and Esslinger. You can also try eBay, as the correct Rolex tool does come up from time to time.

shuntool

Rolex Oyster bracelet screws

The Rolex Oyster bracelet screw size is a standard 1.6mm, although there is one exception. The screw that attaches the clasp to the bracelet is slightly shorter and requires a different screwdriver. This is because the screw does not go all the way through to the other side of the bracelet and is sunk down slightly.

There are a variety of screwdrivers that can be used to remove and replace these screws. The Horotec Rolex-style screwdriver and the OEM one from Panatime are two options at different price points. The Horotec screwdriver has a wider barrel, allowing for a solid grip and more torque. It also comes with two different tip sizes, one for the Oyster bracelet and one for the Jubilee bracelet. The correct tip size for the Oyster bracelet is 1.70mm.

Other recommended screwdrivers include the Bergeon 55-686 6899-AT-160, the Wiha brand, and the ZEALANDE precision screwdriver. The correct tip size for the Jubilee bracelet is 1.4mm.

When choosing a screwdriver, it is important to ensure that the tip size matches the screw head. Using a screwdriver that is too small can damage the screw and the screwdriver itself. It is also recommended to use a screwdriver with parallel-flanks blades for Rolex bracelets.

shuntool

Rolex Jubilee bracelet screws

The Rolex Jubilee bracelet is an elegant and iconic accessory that has been a favourite of many Rolex enthusiasts for decades. Over time, you may need to adjust or service your Jubilee bracelet, and this often involves dealing with the tiny screws that hold it together. Here is a comprehensive guide to the Rolex Jubilee bracelet screws and how to work with them.

The Rolex Jubilee bracelet screws are an essential part of the bracelet's design, securing the links and ensuring a comfortable fit on the wearer's wrist. These screws are typically smaller than those found on the Rolex Oyster bracelet, with a size of approximately 1.4mm. It is important to note that an eyeglass screwdriver or a precision screwdriver with a flat tip of 1.4mm is usually required to work with these screws. Attempting to use a standard flathead screwdriver can result in damage to the screws and the bracelet itself.

When adjusting or servicing your Rolex Jubilee bracelet, it is crucial to use the correct tools. The small size of the screws requires a specialised screwdriver, such as the ZEALANDE® precision screwdriver or similar tools designed for watch repair. These screwdrivers often feature an aluminium body with a double groove for a secure grip, ensuring that you can apply the necessary torque without slipping and scratching your bracelet.

To find the correct screwdriver for your Rolex Jubilee bracelet, it is recommended to search for tools specifically designed for Rolex bracelets. Some options include the Bergeon 7825 strap removal tool and the OYSTER JUBILEE WATCH BAND SCREW DRIVER, which has a 1.4mm blade specifically designed for Rolex watches. When purchasing a screwdriver, pay close attention to the blade size and ensure it matches the screw size of your Rolex Jubilee bracelet.

In conclusion, the Rolex Jubilee bracelet screws are an integral part of the bracelet's design, and proper tools are required for any adjustments or servicing. Always take precise measurements, use the correct screwdriver size, and handle your Rolex Jubilee bracelet with care to avoid damage. With the right tools and knowledge, you can maintain and enjoy your Rolex timepiece for years to come.

shuntool

Rolex screwdriver tools

Rolex watches do not come with tools for maintenance. However, there are several tools available on the market that can be used to maintain your Rolex. One such tool is the screwdriver, which can be used to check the Oyster link screws to ensure they are tight and to remove or add links without visiting a watchmaker.

It is important to use the correct type and size of screwdriver for your Rolex. Rolex uses 1.6mm (160) screws, so a screwdriver with a flat edge at the end is required. A pointed-end screwdriver will not fit flush on the bottom of the screw and will increase the chance of the screw head becoming damaged. The Rolex reference 2100 screwdriver, included with the Rolex Sea Dweller, is a good option. However, this kit is no longer available from Rolex, so you will need to look online for second-hand options. The Rolex Ref. 2100 screwdriver has a flat end, fits oyster link screws precisely, and includes a pin tool for old-style spring bar removal or clasp adjustments. It also comes with a spare link screw inside the tool.

Another option is the Horofix Screwdriver for Rolex, which has a 1.7mm flat head hollow ground tip and a 0.9mm pointed pusher tip. The Horofix screwdriver also includes a 1.3mm flat head tip, which is suitable for Rolex Jubilee bracelets. The Horofix screwdriver has an aluminium body with an ergonomic design and a knurled handle for a better grip. The cap can be removed to store additional blades, which are held in place with a set screw.

There are also other options available, such as the ZEALANDE precision screwdriver with a 1.6mm flat tip made of steel. This screwdriver is designed to allow you to disassemble your Rolex Oyster bracelets or other screws requiring a width of 1.6mm. It has an aluminium body with a double groove for a better grip.

When purchasing a screwdriver for your Rolex, it is important to ensure that you are buying from a reputable source and that the screwdriver is the correct size and type for your particular watch model.

shuntool

Rolex bracelet screw length and thickness

The screw size for a Rolex bracelet depends on the type of bracelet. The Oyster bracelet, for example, requires a 1.6mm width screwdriver, while the Presidential and Jubilee bracelets have smaller screws, requiring a 1.4mm width screwdriver.

For the Rolex Oyster bracelet, a precision screwdriver with a width of 1.6mm is needed. This size is also suitable for other brands' bracelets that require a similar width. The screwdriver has an aluminium body with a double groove for a better grip, and a flat tip made of steel.

The Rolex Presidential and Jubilee bracelets, on the other hand, require a smaller screwdriver with a width of 1.4mm. While some people use an eyeglass screwdriver for these bracelets, it is recommended to use a screwdriver with parallel-flanks blades, which can be purchased from companies like Bergeon.

It is important to use the correct size screwdriver for Rolex bracelets. Using a screwdriver that is too small can damage the screw and the screwdriver itself. It is recommended to use the largest screwdriver that fits completely within the screw head without being too wide.

In addition to the screwdriver size, the length and thickness of the screws themselves are also important factors. For example, the Ewatchparts 12 Screw Compatible with Mens Rolex Oyster Watch Band Link has a length of 13.7mm and a thickness of 1.7mm. These screws are designed for older Oyster watch bands and fit various Rolex models, including the Submariner, GMT, Daytona, Explorer, Air King, Sea Dweller, and Oyster Perpetual.

To summarise, the screw length and thickness for Rolex bracelets vary depending on the specific bracelet type. It is important to use the correct size screwdriver to avoid damage, and to verify the length and thickness of screws before purchasing to ensure compatibility.

Frequently asked questions

The screw size for a Rolex Oyster bracelet is 1.6mm.

Yes, Presidential and Jubilee bracelets have smaller screws than Oyster bracelets. The screw size for Presidential and Jubilee bracelets is 1.4mm.

You can buy a precision screwdriver for your Rolex bracelet from companies such as ZEALANDE, Esslinger, or Amazon.

You need a screwdriver with a flat tip. Make sure it is hollow-ground and has a parallel-flanks blade.

The screw size for a Rolex Submariner Oyster watch band is 1.70mm in thickness and 13.70mm in length.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment