The Ruger 10/22: Plug Screw Size And Compatibility

ruger 10 22 plug screw size

The Ruger 10/22 is a popular firearm, and like all firearms, it requires regular maintenance to ensure safe and effective operation. One common task is replacing the receiver plug screws, which are small and can be easily lost during disassembly. These screws are typically #6x48 tpi (threads per inch) and have a flush head with a flat tip slot. They are available in black or stainless steel and can be purchased directly from Ruger or through various online retailers. It's important to use the correct type of screwdriver when working with gun screws to avoid damaging the screws or the gun itself.

shuntool

The Ruger 10/22 plug screw size is #6x48 tpi

The Ruger 10/22 is a popular firearm known for its customizability. Owners often make modifications to the gun, such as removing the factory-installed rail and adding a scope or iron sights. This requires the use of plug screws to fill the holes left by the removed rail. The correct screw size for this application is #6x48 tpi.

When purchasing plug screws, it is important to ensure that they have a flush head, a flat tip slot, and are short enough to not interfere with the bolt. A tiny dot of thread lock can be applied to keep them from unthreading and falling out. Ruger sells sets of four filler plug screws in either blued or stainless steel on their website. However, they only ship to US citizens, so customers in other countries may need to look for alternative sources or contact Ruger directly for assistance.

Some local hardware stores sell gun screws and filler screws, along with cleaning kits and related products. Additionally, local gun shops may have some used screws available, as they often remove scopes and other accessories from guns. It is always worth checking with these local sources before purchasing screws online or from a larger retailer.

In summary, the Ruger 10/22 plug screw size is #6x48 tpi. This screw size is used for the scope mount hole on the receiver and can also be used to fill holes left by removed rails. Proper tools and techniques should be used when working with these screws, and it is a good idea to have some spare screws on hand. Ruger and some other retailers sell sets of plug screws, but they may not be available to customers outside the US. Local hardware stores and gun shops can also be good sources for these screws.

shuntool

The screws have a flush head, a flat tip slot, and are short

The Ruger 10/22 plug screw size is #6x48 tpi. These screws have a flush head, a flat tip slot, and are short enough not to interfere with the bolt. They are available in black or stainless steel from the Ruger website, where they can be purchased in sets of four.

It is important to note that the Ruger 10/22 plug screws are not typically found at hardware stores. While some local hardware stores may sell gun screws and filler screws, these are not common. It is recommended to purchase the correct screws from a gun shop or a specialised online store.

When removing or replacing the Ruger 10/22 plug screws, it is crucial to use a screwdriver designed specifically for gun screws. Using the wrong type of screwdriver can ruin the screws. Additionally, when buying plug screws, it is advisable to purchase extra ones, as they are tiny and can be easily lost.

For those seeking to mount a scope on their Ruger 10/22, it is important to know that the scope base mounting holes are tapped 6-48. This is a rare thread size in general-purpose hardware stores, but it is commonly found in shooting supply stores, gun shops, and gunsmithing supply stores.

In summary, the Ruger 10/22 plug screws have specific characteristics, including a flush head, a flat tip slot, and a short length. They are available from the Ruger website or specialised gun shops, and it is important to use the correct tools when working with these screws to avoid damage.

shuntool

A tiny dot of thread lock keeps them from unthreading and falling out

When it comes to the Ruger 10/22 plug screw size, it's important to know that these screws require careful handling and the right tools to avoid damaging them. The plug screws on the Ruger 10/22 have a specific thread size of 6-48, which is considered a rare thread size and may not be easily found at local hardware stores. These screws have a flush head and a flat tip slot, ensuring they don't interfere with the bolt.

To keep these tiny screws secure and prevent them from unthreading and falling out, a small amount of thread lock is applied. This ensures that the screws stay in place and don't come loose over time. It's important to use the correct screwdriver designed for gun screws when working with these plug screws, as using the wrong type can ruin the screws.

When purchasing replacement plug screws, it's recommended to buy some extras, as they are small and can be easily lost during maintenance or modifications. Ruger offers sets of four filler plug screws in either blued or stainless steel on their website. These screws are specifically designed to fit the Ruger 10/22 and ensure a precise fit.

Additionally, some local gun shops or scope mounting services may have spare plug screws available, so it's worth checking with them if you need a quick replacement. Proper care and attention to detail are crucial when it comes to maintaining and modifying your Ruger 10/22, ensuring the firearm's longevity and safe operation.

shuntool

They cost $2 for a set of four

If you're looking for Ruger 10/22 plug screws, you're in luck! These tiny but essential components for your firearm can be purchased directly from the Ruger website. The screws have a flush head, a flat tip slot, and are designed to be short enough to not interfere with the bolt. They are available in both blued and stainless steel finishes, so you can choose the option that best suits your rifle.

The Ruger 10/22 plug screws are specifically sized with a #6x48 thread pitch, which can be challenging to find at your typical hardware store. Fortunately, Ruger offers a set of four filler plug screws for a very reasonable price of just $2. That's incredible value for these specialised screws, and it's always a good idea to have a few spares on hand as they can be easy to lose during maintenance or modifications.

When ordering from the Ruger website, it's worth noting that there may be a minimum purchase requirement of $10. However, if you need a quick solution and don't want to wait for shipping, it's worth checking with your local gun shop or a store that offers scope-mounting services, as they may have similar screws available.

One important tip to keep in mind when working with these screws is to use a screwdriver specifically designed for gun screws. Using the wrong type of screwdriver can ruin the screws, so it's worth investing in the right tool for the job. Additionally, applying a tiny dot of thread lock can help prevent the screws from unthreading and falling out over time.

Overall, the Ruger 10/22 plug screws, available for just $2 for a set of four, are a cost-effective and reliable option to keep your firearm in top condition.

shuntool

You can buy them from ShopRuger

If you're looking for Ruger 10/22 plug screws, you can buy them from ShopRuger. The plug screws are used to fill the holes in the receiver left by a factory-installed rail when it is removed. The screws have a flush head, a flat tip slot, and are short enough to not interfere with the bolt. They also come with a tiny dot of thread lock to prevent them from falling out.

ShopRuger offers a set of four filler (plug) screws for the 10/22, which are available in either blued or stainless steel. The part number for the stainless steel set is C-83-10_22-Stainless, and they can be purchased directly from the ShopRuger website for $2 each or $2 for a set of four. The direct link to the product page on the ShopRuger website is http://shopruger.com/C-83-10_22-Stainless-Set-4-Filler-plug-Screws/productinfo/60045/.

In addition to ShopRuger, some people have suggested trying local gun shops or gunsmiths, as they may have the screws available or be able to order them for you. You can also try contacting Ruger customer service directly to explain your situation, and they may be able to send you the screws free of charge.

It is important to note that the Ruger 10/22 plug screws have a specific thread size of 6-48, which is considered a rare thread size and may not be available at general hardware stores. When working with any screws on a gun, it is important to use a screwdriver designed for gun screws to avoid damaging the screws.

Frequently asked questions

The screw size is #6x48 tpi.

You can buy them from ShopRuger.com for $2.00 for a set of four in either black or stainless.

Yes, you may be able to find them at a local gun shop or hardware store.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment