Choosing The Right Screw Size For Your Subaru's License Plate

If you're looking to replace the screws on your Subaru license plate, you may be wondering about the correct screw size. This can depend on the model of your Subaru, with some variation between the front and rear license plates.

For example, the 2020 Subaru Crosstrek requires 1/4 diameter and 3/4 long screws with a thread size of 1/4-14-3/4. On the other hand, the Subaru Impreza requires #12 Philips screws that are 3/4 long.

Some Subaru models use smaller screws than most cars, and it's important to get the right fit to avoid damaging the plastic inserts or holes in the bumper. It's recommended to use stainless steel or rustproof screws to prevent rust stains on your license plate.

You can purchase compatible screws from various retailers, including Amazon, Ace Hardware, and auto parts stores.

Screw size for a 2023 Subaru Outback license plate

If you're looking to replace the license plate screws on your 2023 Subaru Outback, there are a few options available. It's important to note that the license plate screws for Subaru vehicles are typically smaller than standard screws, so it's best to look for screws specifically designed for Subarus or for license plates in general.

One option is to purchase license plate screws from Amazon that are compatible with Subarus. These screws are made of stainless steel and are designed to fit both the front and rear license plates of various Subaru models, including the Outback. They typically come in packs of four and have a Phillips pan head, which means you can install them with a regular Phillips screwdriver. The length of these screws is important, as you'll want to ensure they're long enough to secure both the license plate and a frame, if desired. Some screws are also designed with rust-proof finishes to prevent oxidation and ensure longevity.

Another option is to visit a hardware store or a car parts store and ask for sheet metal screws in the appropriate size. For metric screws, a size of 6mm round x 1mm thread pitch and about 15mm long should work. If you're using standard measurements, you can ask for 1/4" x 3/4" or 1" pan head stainless screws, depending on the thickness of your license plate frame.

When purchasing screws, it's important to consider the type of screwdriver you'll need for installation. Phillips head screws are common and can be tightened with a standard Phillips screwdriver. Additionally, some screws have a security torx design, which requires a specialized driver.

If you're looking for added security, you can also explore anti-theft or security screws designed to prevent license plate theft. These screws typically have unique heads that require a special driver and are more difficult to remove.

Finally, it's worth noting that some Subaru dealerships may provide branded brackets or screws for license plates, so it's worth inquiring about these options as well.

Screw size for a Subaru Forester license plate

The screw size for a Subaru Forester license plate is not standardized and will depend on the model year of your car. For example, a 2020 Subaru Forester Sport uses #10 screws, while a 2023 Subaru Solterra uses M6x1.00x12mm screws.

You can purchase license plate screws for your Subaru Forester at various hardware stores, car parts stores, or online retailers. Amazon offers a variety of license plate screw kits that are compatible with Subaru models, including the Forester. These kits typically include four or eight screws made of stainless steel, which are rust-proof and tamper-resistant.

When purchasing license plate screws, it is important to consider the size, material, and security features that best suit your needs. It is also recommended to refer to your car's manual or seek advice from a professional if you are unsure about the appropriate screw size for your specific model.

To install the license plate screws, simply use a Phillips-head screwdriver to secure the license plate to your vehicle. If your car has plastic inserts or anchors, ensure that the screws you purchase are compatible and do not bind or damage the plastic components.

Screw size for a Subaru Impreza license plate

The screw size for a Subaru Impreza license plate is not a standard size and may vary depending on the model year and specific vehicle configuration. However, based on the information gathered from various online forums and product descriptions, it appears that the screw size for a Subaru Impreza license plate is typically between #8 and #12, with a length ranging from 3/4" to 1-1/2". The correct screw size is crucial to ensure a secure fit and to avoid damaging the license plate mounting holes or plastic inserts.

It is recommended to use stainless steel screws to prevent rust and corrosion. Phillips pan head or tamper-resistant Torx security screws are also popular options for added security and to prevent license plate theft. Some Impreza owners have mentioned using machine screws with a tap to cut threads into the plastic inserts, ensuring a more secure fit.

When replacing license plate screws, it is advisable to purchase a set specifically designed for Subaru vehicles, as the thread size and pitch may differ from universal fit screws found at hardware stores or auto parts retailers. Several online retailers, such as Amazon, offer stainless steel license plate screw kits compatible with various Subaru models, including the Impreza. These kits typically include the necessary screws and washers for a secure and corrosion-resistant installation.

When in doubt, it is always best to consult a Subaru dealer or a trusted mechanic to ensure the correct screw size and type is used for the license plate installation on your specific Subaru Impreza model.

Using standard screws for a Subaru license plate

Choosing the Right Screws

Standard license plate screws are typically used for Subaru vehicles. These screws are designed to fit the specific thread size and pitch of Subaru license plate holes. You can find these screws at most hardware stores or auto parts stores. When purchasing, look for screws that are specifically labelled as "license plate screws".

Screw Size and Type

The standard license plate screws for Subaru vehicles are usually 6mm in diameter with a 1mm thread pitch and a length of about 15mm to 16mm. This size is suitable for both frame and frameless installations. The screws should have a Phillips pan head, which allows for easy installation using a standard Phillips screwdriver.

Material

It is recommended to use stainless steel screws for your Subaru license plate. Stainless steel offers rust and oxidation resistance, ensuring that the screws last the lifetime of your vehicle. Some screws also come with a black oxide finish, providing an additional layer of protection and an improved aesthetic.

Compatibility

Standard license plate screws are compatible with a wide range of Subaru models, including the Outback, Forester, Impreza, Crosstrek, Ascent, Legacy, WRX, BRZ, and B9 Tribeca. Ensure that the screws you purchase are compatible with your specific Subaru model.

Installation

Installing the license plate screws is a relatively simple process. You will need a standard Phillips screwdriver to secure the license plate to your vehicle. It is recommended to use a silicone license plate frame or cover to prevent scratching and rattling. These frames provide a secure fit and reduce the likelihood of direct contact between the license plate and your vehicle's paintwork.

Alternative Options

If you are concerned about license plate theft, you may consider using security screws, which require a specialized star driver for installation and removal. Additionally, anti-theft license plate screws with a unique head design can provide further protection.

In summary, using standard screws for a Subaru license plate is a simple process. By choosing the right size, type, and material, you can securely attach your license plate while also preventing rust and ensuring compatibility with your specific Subaru model. Remember to follow installation instructions carefully and consider adding a license plate frame for added protection.

Using security screws for a Subaru license plate

It's frustrating to have your license plate stolen, and it can be a hassle to replace it. To make it more difficult for thieves to take your license plate, you can use security screws. This guide will explain the benefits of security screws, the different types available, and how to choose and install the right ones for your Subaru.

Benefits of Security Screws for License Plates

Using security screws for your license plate can deter thieves and make it more difficult for them to remove the plate. This can help protect your vehicle from theft and save you the time and hassle of replacing a stolen license plate. Security screws are also useful if you live in an area where license plates are frequently stolen.

Types of Security Screws

There are several types of security screws that you can use for your license plate. Here are some options:

• Tamper-proof screws: These screws have a unique head design that requires a special tool to install and remove. They are difficult to remove without the correct tool, making them a good option for license plates.
• One-way screws: One-way screws can be tightened but not loosened, making them a permanent solution. While they provide strong security, they can be challenging to remove if you need to replace your license plate.
• Security Torx screws: Security Torx screws have a pin in the center that prevents a standard Torx bit from being used. They offer more security than regular Torx screws, which are commonly used in construction.
• Locking screws: You can use thread-locking fluid like Loctite on standard screws to make them more secure. This substance prevents the screws from being loosened, but they can be removed with heat if needed.

Choosing the Right Security Screws for Your Subaru

When choosing security screws for your Subaru license plate, it's important to consider the following:

• Screw size: Subaru license plate screws are typically metric and smaller than those used on other vehicles. The standard size is 6mm round x 1mm thread pitch and about 15mm or 16mm long.
• Compatibility: Ensure that the security screws you choose are compatible with your Subaru model. Some screws may only fit certain models or years.
• Ease of removal: If you may need to remove the license plate in the future, avoid one-way screws or screws with snap-off heads. Instead, opt for security screws that can be removed with a special tool.

Installing the Security Screws

To install the security screws on your Subaru license plate, follow these steps:

• Purchase the appropriate security screws for your Subaru model. You can find these at auto parts stores or online.
• Remove your old license plate screws using a standard screwdriver.
• If necessary, clean the screw holes to remove any dirt or debris.
• Insert the new security screws into the holes and tighten them with the appropriate tool.
• If using thread-locking fluid, apply it to the screws before tightening them.

By following these steps and choosing the right security screws, you can help protect your Subaru's license plate from theft. Remember to consider the unique size and compatibility requirements of your Subaru model when selecting security screws.

Frequently asked questions