Mounting Sharp 5K Tv: Screw Size Requirements

Choosing the right screw size is crucial for mounting a Sharp 5K TV. The correct screw size depends on the VESA pattern of the TV, which can be found in the user manual or by measuring the distance between the mounting holes on the back of the TV. The VESA pattern will determine the suitable mounting bracket and screw size. It is also important to consider the length of the screw, ensuring it reaches a minimum of 5mm inside the thread. For larger TVs mounted on brick walls, longer concrete screws may be necessary, while lighter TVs can use shorter plastic wall anchors. Universal screw kits are available that include a range of screw sizes to accommodate different TV models.

Screw size depends on the VESA pattern of your Sharp TV

The screw size for mounting a Sharp TV depends on the VESA pattern of your specific model of TV. The VESA pattern is a standard that defines the distance between the mounting holes on the back of a TV.

To find the VESA pattern of your Sharp TV, you can refer to the user manual, or you can measure the distance between the mounting holes manually. First, locate the mounting holes on the back of the TV. Then, use a tape measure to find the distance between the top two mounting holes, followed by the vertical distance between the two side mounting holes. Finally, convert the measurements from inches to millimetres, and you will have your VESA pattern.

Once you know the VESA pattern, you can determine the appropriate screw size. The screw size will depend on the size of your TV and the mounting bracket you are using. For smaller TVs (under 200 mm), M4 screws are typically used. M6 screws are commonly used for TVs with a VESA size of 200x200, and M8 screws are used for larger screens.

It is important to ensure you are using the correct screw size to safely secure your Sharp TV to the wall.

The VESA pattern can be found in the user manual

The VESA pattern is a standard specification that indicates the position of the four mounting holes on the back of your TV. It is important to know your TV's VESA pattern to ensure you get the right mounting bracket and screws to secure it safely to the wall.

You can find your Sharp TV's VESA pattern in the user manual. If you don't have access to the user manual, you can try searching for it online by using your model number. If you are unable to find the user manual or the model number, you can manually measure the VESA pattern by following these steps:

• Find the mounting holes on the back of the TV.
• Use a tape measure to measure the horizontal distance between the centers of the left and right mounting holes.
• Measure the vertical distance between the centers of the top and bottom mounting holes.
• Convert the measurements from inches to millimeters, if necessary. The result will be your VESA pattern.

For example, if the horizontal distance is 400mm and the vertical distance is 200mm, your VESA pattern would be 400x200.

It is important to note that VESA patterns are typically displayed in millimeters and are read in the order of horizontal measurement followed by vertical measurement. Knowing your TV's VESA pattern will help you choose a compatible mount and ensure a safe and secure installation.

If you don't have the user manual, you can measure the mount holes on the TV

If you don't have the user manual for your Sharp 5K TV, you can still measure the mount holes to determine the correct screw size.

First, locate the mounting holes on the back of your TV. These holes are usually found near the centre of the TV and are arranged in a grid pattern. Once you've found the holes, use a tape measure to measure the distance between the top two mounting holes, as well as the vertical distance between the side mounting holes. This will give you the VESA pattern, which is the standard used by most TV manufacturers to ensure compatibility with wall mounts.

The VESA pattern is measured in millimetres and represents the horizontal and vertical distance between the holes. For example, a VESA pattern of 100 x 100 means that the four mounting holes are 100mm apart in both directions.

After determining the VESA pattern, you can then select the appropriate screw size. The screw should reach all the way inside the thread, with a minimum length of 5mm considered a good fit. To measure the thread length, you can use a thin, long object like an unfolded paper clip. Insert it into the screw hole and measure how much of it goes inside.

It's important to note that different Sharp TV models may require different screw sizes, so it's always best to measure the mount holes and consult the manufacturer's guidelines or a professional if you're unsure. Additionally, make sure to use the appropriate type of screws and anchors for the type of wall you're mounting your TV on.

If you prefer not to measure the mount holes yourself, you can also purchase a universal screw kit that includes a range of screw sizes to adapt to almost any setup. These kits are designed to fit most TV brands, including Sharp.

M6 screws are a universal size for mounting

M6 screws are a standard size for mounting Sharp 5K TVs. M6 screws are a type of metric fastener with a nominal diameter of 6 millimetres, making them perfect for applications where strong and accurate fastening is required. They are commonly used in engineering, construction, and manufacturing industries due to their versatility and compatibility with medium loads.

When it comes to mounting hardware, M6 screws are an excellent choice. They are flexible and robust, making them suitable for mounting various hardware components. Their oversized thread diameter and pitch make them ideal for fastening brackets, panels, and electronic devices. Additionally, the availability of different materials like stainless steel or carbon steel makes them suitable for both indoor and outdoor use without worrying about rusting.

To ensure a secure fit for your Sharp 5K TV, it is recommended to use M6 screws with a length of at least 10 millimetres plus the thickness of the mount. Washers can also be used to space out the screws if needed. It is important to screw them in gently by hand to avoid the risk of breaking the screen.

M6 screws are part of a universal TV mounting hardware kit that typically includes M4, M5, and M8 screws. This range of screw sizes ensures compatibility with different TV models and mounting brackets. The specific screw size required for your Sharp 5K TV may vary depending on its VESA pattern, so it is important to refer to the user manual or measure the distance between the mounting holes to determine the correct size.

In summary, M6 screws are a universal size for mounting Sharp 5K TVs. They offer versatility, strength, and accuracy, making them a reliable choice for securing your TV to the wall bracket safely and securely.

For large TVs on brick walls, use longer concrete screws

When mounting a large TV on a brick wall, it is important to use the correct type and length of screws to ensure the safety of your TV and those around it. While plastic wall anchors can be used for lighter TVs, concrete screws are recommended for larger, heavier TVs weighing over 75 pounds.

Concrete screws, also known as sleeve or wedge anchors, are designed to anchor objects to concrete or brick walls. They typically come in lengths ranging from 3 to 4 inches, and the appropriate length will depend on the thickness of the wall and the weight of the TV.

To install concrete screws, you will need a power drill, preferably a cordless drill with a hammer function. It is important to avoid using an impact driver as it can easily over-tighten the screws. Additionally, you will need masonry drill bits, which are designed for drilling into heavy-duty concrete and brick surfaces.

Before drilling, mark the location of each screw hole on the brick wall using a permanent marker. Ensure that the marks are not on the mortar lines, as the anchor's grip will deteriorate over time. Once the holes are drilled, insert the concrete screws by hand and tighten them using the appropriate driver bit, such as a No. 3 Phillips or a socket set.

It is important to note that the screw length should be longer than the thickness of the wall bracket being used. The length of the screw should be sufficient to ensure a secure fit without being too long, as it may damage the screen.

By following these guidelines and using longer concrete screws, you can safely mount a large TV on a brick wall.

Frequently asked questions