Understanding Screw Sizes For Kanger Tech Rba Modifications

The Kangertech Mini RBA Plus Deck is a replacement for the Kangertech Subtank Plus and Subtank Mini. It features better channels near the screws for trapping coil leads, an updated insulator, and a slimmer negative post/chimney design. The Kanger RBA side screw size is M1.4x2.5mm. This screw size is hard to find in stores, but it is available on e-commerce websites like eBay and Amazon. Authentic Hobo v3 and v3.1 and the Royal Hunter Mini are other atomizers that require replacement screws.

Kanger RBA side screw replacement

If you need to replace the side screw on your Kanger RBA, you will need to know the size of the screw. The side screw that holds the RBA cover down is very small, and its size is hard to determine. It is recommended to use a screw of size M1.4x2.5mm as a replacement.

These tiny screws can be hard to find in hardware stores, and you may need to look in hobby shops that carry parts for RC planes and cars. You can also find them on eBay or Amazon, but delivery may take some time.

It might be easier and more cost-effective to purchase a replacement RBA section from a vendor like Fasttech, rather than just buying the screws. This way, you will have some spare parts in case you need to replace the screw again in the future.

It is always a good idea to keep your Kanger RBA well-maintained and to tighten the screw regularly to avoid losing it.

Screw size: M1.4-0.3 x .25mm

The screw size M1.4-0.3 x .25mm is a type of machine screw. This screw size is often used for the Kanger RBA side screw, which holds the RBA cover down.

You can find this screw size in stainless steel with an ultra-thin head and a Phillips drive. It is available in packs of 100.

If you are looking for replacement screws for your Kanger Tech RBA, it is important to note that these screws can be hard to find. You may need to look in hobby shops that carry parts for RC planes or cars, or you can try purchasing them online through websites like eBay or Amazon.

It may be easier and more cost-effective to purchase a replacement RBA section rather than individual screws.

Kanger Mini RBA Plus Deck

The Kanger Mini RBA Plus Deck v2 is a replacement deck for the Kanger Subtank Mini and Toptank Mini Hybrid Tanks. It is made of high-quality stainless steel, with smaller and slightly raised eLiquid inlet holes on two sides of the chimney, which reduces leakage issues found in previous versions. The chimney houses a screw, which makes disassembling the device easy.

The Kanger Mini RBA Plus Deck v2 is designed with PEEK insulators for enhanced thermal resistance. Polyether ether ketone (PEEK) insulation is a semicrystalline thermoplastic, which maintains its chemical and mechanical resistance properties at high temperatures. This makes it perfect for RBA decks as it is superior to other materials.

The Kanger Mini RBA Plus Deck v2 is suitable for those who have lost or damaged their deck, or for those who want to upgrade to an improved deck. It is compatible with the Subtank Mini and Subtank Plus only and will not work with any other tanks.

The Kanger Mini RBA Plus Deck v2 comes with a pre-installed coil. It is important to note that rebuildable atomizers (RDAs, RBA, RTAs) pose certain risks, and users should familiarise themselves with these before use.

Authentic Hobo v3 and v3.1 screw size: 4-40 x 1/8

The Hobo V3 and V3.1 are rebuildable dripping atomizers (RDAs) made by Hobo Customs. The Hobo RDA v3.1 is made with Medical Grade 316 Stainless Steel and features a moving positive post, a single to dual airflow control, and a gold-plated copper post, among other features.

The screw size for the Hobo v3 and v3.1 is 4-40 x 1/8. This particular screw size and type is commonly available in hardware stores and online. For example, The Home Depot carries a #4-40 x 3/8 in. Phillips Flat Head Zinc Plated Machine Screw (8-Pack).

It is important to note that the screw size for the Hobo v3 and v3.1 is different from the screw size for the Kanger RBA, which is M1.4x2.5mm. The Kanger RBA side screw holds the RBA cover down, and replacements can be purchased on Amazon or eBay.

Aromamizer Velocity Deck screw size: M2.5x3.0

The Aromamizer Velocity Deck screw size is M2.5x3.0. This screw size is specifically for the Aromamizer Velocity Deck, which is a component of an electronic cigarette or vaping device.

Screw sizes for electronic cigarette components, such as the Kanger RBA, can vary depending on the specific model and the type of screw. It's important to use the correct screw size to ensure a proper fit and maintain the device's functionality.

In the case of the Kanger RBA, the side screw that holds the RBA cover down has been identified by users as having a size of M1.4x2.5mm. This particular screw size can be challenging to find, and users have suggested checking hobby shops that carry parts for RC planes or cars, or purchasing them online through sites like eBay or Amazon.

Additionally, for the Steam Crave Aromamizer Plus RDTA 30mm, the screw size for the postless deck has been suggested to be M2.5x4mm. This information was provided by another user in an online forum, who also recommended contacting Steam Crave directly for confirmation of the exact screw size.

It's always a good idea to consult official sources or seek advice from experts or experienced users when dealing with specific screw sizes for electronic cigarette components to ensure the correct information and avoid potential damage to the device.

Frequently asked questions