Snes Controller Screw Size: What You Need To Know

The SNES controller, known for its dogbone shape, is a classic part of retro gaming. Unlike the Control Deck, the SNES controller does not use custom screws, making it easy to open and clean. The screws are Philips-head and are used to hold the two halves of the controller's casing together.

SNES controller screws are 2-56 x 5-16 in size

If you're looking to repair or restore a Super Nintendo Entertainment System (SNES) controller, you'll need the right size screws. These screws are essential for holding the two halves of the controller casing together. While Nintendo didn't use custom screws for this controller, you'll still need to ensure you have the correct type and size to open and repair your controller safely.

The SNES controller screws are 2-56 x 5-16 in size. These screws are Philips head type and are used to secure the two halves of the controller's casing. They are not custom screws, so they can be easily sourced and replaced if missing or damaged.

You can purchase replacement screws for the SNES controller online. They are typically sold in lots of 50, which is more than enough for a single controller. These replacement screws are reproductions that match the original dimensions and specifications.

When repairing your SNES controller, it's important to be careful with the delicate rubber pads and ensure that you are using the correct tools and procedures to avoid damaging the controller.

You can buy a lot of 50 replacement screws for the SNES controller

If you are looking to replace the screws on your SNES controller, you can buy a lot of 50 replacement screws. These are brand-new, excellent reproductions that match the original dimensions and specifications of the screws used to hold the two halves of the casing together.

The screws are Phillips-head and are compatible with the SNS-005 controller model. They are available on eBay with free shipping and a 30-day return window. The seller, starwander, is based in Broomfield, Colorado, and has good feedback, with a rating of 97.3% positive.

The listing for these screws has been very popular, with a super high amount of watchers and 531 already sold. Buyers have left positive feedback, confirming that the screws fit perfectly and are the correct size.

You can also find similar lots of 50 screws for other Nintendo controllers, such as the NES-004, as well as repair kits and other replacement parts for the SNES controller.

It is important to note that while these screws are likely to fit your SNES controller, using them to replace the original screws may result in rethreading the plastic. In the worst-case scenario, the plastic could break, so proceed with caution.

The screws hold the two halves of the SNES controller together

The Super Nintendo Entertainment System (SNES) Controller is considered one of the best designs of Nintendo's controllers. The SNES controller features five screws on the back that hold the two halves of the controller casing together. These screws are not custom-made, so they are easy to remove if you want to open and clean the controller.

The SNES controller screws are Phillips head screws. The size of these screws is 2-56 x 5-16". You can purchase replacement screws for the SNES controller online, and they usually come in packs of 50. These replacement screws are excellent reproductions and match the original dimensions and specifications.

When purchasing replacement screws, it is important to ensure that you are buying the correct size and type of screws for your controller. In some cases, you may need to rethread the plastic if the screws do not fit properly. It is also worth noting that some online retailers may have high shipping costs or may not ship to certain regions.

Overall, the screws on the SNES controller play an important role in holding the two halves of the casing together, and they can be easily replaced if they are missing or damaged.

The SNES controller uses Phillips-head screws

The Super Nintendo Entertainment System (SNES) Controller is a classic part of retro gaming, often said to be one of the best designs of Nintendo's controllers. The SNES controller uses Phillips-head screws, which are easy to remove with the right screwdriver. There are five screws on the back of the controller that need to be removed to open it up. These screws are used to hold the two halves of the controller's casing together.

The SNES controller is a wired controller, similar to most of its contemporaries, and has a very simple layout. The design is often referred to as a "dogbone" due to the shape of the lower part of the controller. Nintendo did not use custom screws in the SNES controller, making it easy to open and clean. The screws are readily available as replacement parts and are sold in lots of 50. These replacement screws are excellent reproductions and match the original dimensions and specifications.

When purchasing replacement screws, it is important to ensure that they are the correct size and fit for your controller model. In the case of the SNES controller, the screw size is 2-56 x 5-16". While generic screws may fit, there is a risk of rethreading the plastic and potentially breaking it. Therefore, it is advisable to use screws specifically designed for the SNES controller.

The SNES controller is a beloved piece of gaming history, and with proper care and maintenance, including the use of appropriate replacement screws, it can continue to be enjoyed for years to come.

SNES controller screws are available in packs of six

If you're looking to repair or refurbish your SNES controller, you'll be glad to know that replacement screws are readily available. These screws are specifically designed to hold the two halves of the controller casing together, ensuring a secure fit.

You can purchase SNES controller screws in packs of six, which is convenient if you're looking to refurbish a single controller. These packs provide the exact number of screws needed for a complete controller refurbishment. No need to worry about having leftover screws or running out during the repair process.

The screws in these packs are typically reproductions, carefully crafted to match the original dimensions and specifications of the SNES controller screws. This ensures a seamless fit and an authentic look for your controller.

With these replacement screws, you can easily open and clean your SNES controller or perform more extensive repairs. It's worth noting that the SNES controller uses standard Phillips screws, making it more accessible for repairs compared to other Nintendo controllers that use custom screws.

So, if you're in need of SNES controller screws, look no further than the conveniently sized packs of six. They provide the perfect quantity for a single controller refurbishment and will help you get your SNES controller back in working order.

Frequently asked questions