
The Strong-Drive XL Large-Head Metal Screw is a fastener engineered and extensively tested to meet the needs of demanding metal-to-metal applications. It is load-tested and code-listed, allowing for maximum load values during installation. The screw is ideal for applications requiring high shear or uplift resistance and can serve as a 1-for-1 replacement for pins. It features a 5/16 hex drive, a Quik Guard® coating for corrosion protection, and a 5/8 diameter integral washer. While hardened fasteners may experience performance issues in wet or corrosive environments, the Strong-Drive XL Large-Head Metal Screw is designed for dry, interior, and non-corrosive settings.
Characteristics | Values |
---|---|
Drive type | 5/16" Hex |
Head type | Hex Washer |
Point type | #5 Drill Point |
Load tested | Yes |
Code-listed | Yes |
Coating | Quik Guard® |
Diameter | 5/8" |
Washer | Integral |
Use | Steel decking or other cold-formed steel framing; connectors to structural steel |
Environment | Dry, interior and noncorrosive |
Bit part number | BITHEXR516-R1 or BITHEXLB516 |
Bit replacement | BITHEXR516-134 |
Nominal shear capacity | 3110 lb |
Nominal tension capacity | 4985 lb |
What You'll Learn
Load-tested and code-listed for maximum load values
The Strong-Drive XL Large-Head Metal Screw is load-tested and code-listed, allowing for maximum load values during installation. This screw is the perfect choice for applications requiring high shear or uplift resistance and can serve as a 1-to-1 replacement for pins.
The load-testing process for the Strong-Drive XL Large-Head Metal Screw involves subjecting the screw to various mechanical and physical tests to determine its performance characteristics. These tests may include tensile strength, offset yield, elongation after fracture, and hardness tests, among others. By conducting these tests, the screw's ability to withstand different types of loads and stresses can be evaluated, ensuring its suitability for specific applications.
Code-listing refers to the process of assigning specific codes or classifications to fasteners based on their performance and characteristics. In the case of the Strong-Drive XL Large-Head Metal Screw, its code-listing provides information about its maximum load-bearing capacity, as well as any relevant safety factors that need to be considered during installation. This information is crucial for ensuring the safe and proper use of the screw in construction and engineering applications.
The load-testing and code-listing of the Strong-Drive XL Large-Head Metal Screw offer several benefits. Firstly, they provide assurance that the screw can withstand high shear and uplift forces, making it suitable for demanding metal-to-metal applications. Secondly, the maximum load values obtained from testing help engineers and designers select the appropriate screw for a specific application, ensuring optimal performance and safety. Additionally, the load-testing and code-listing process may also include evaluations of the screw's performance in different environmental conditions, such as wet or corrosive environments, to determine any limitations on its use.
Overall, the load-tested and code-listed nature of the Strong-Drive XL Large-Head Metal Screw ensures its reliability and safety for a range of applications. By understanding the maximum load values and following the recommended usage guidelines, users can confidently utilize these screws to meet their specific needs.
The Army's Secret Weapon: Socket Head Screws
You may want to see also
High shear and uplift resistance
The Strong-Drive XL Large-Head Metal Screw is a fastener that has been engineered and extensively tested to meet the needs of the most demanding metal-to-metal applications. It is load-tested and code-listed, allowing you to get the maximum load values for installation. This screw is an excellent choice for high shear and uplift resistance and can be used as a 1-for-1 replacement for pins.
The Strong-Drive XL Large-Head Metal Screw is designed to provide superior performance in both shear and uplift resistance. The screw's large head provides a greater surface area, distributing the load more effectively and reducing the risk of the screw pulling out. The screw's code listing ensures that it has been tested and approved for use in applications requiring high uplift resistance, such as steel decking.
Additionally, the screw features a 5/16" hex drive and a 5/8" diameter integral washer. The hex drive provides a secure grip for the screwdriver or drill, ensuring that the screw can be tightly fastened. The integral washer provides a larger bearing surface, further distributing the load and reducing the risk of the screw pulling through the material.
To maximize the uplift resistance of the Strong-Drive XL Large-Head Metal Screw, it is important to follow the manufacturer's installation instructions and guidelines. Proper installation ensures that the screw can withstand the maximum load values as specified in the product's technical data and load tables. It is also crucial to consider the type and thickness of the material being fastened, as well as the number of screws required to achieve the desired uplift resistance.
The Evolution of Star Head Screws: Names and Uses
You may want to see also
1-for-1 replacements for pins
The Strong-Drive XL Large-Head Metal Screw is an excellent 1-for-1 replacement for pins. These screws are load-tested and code-listed, allowing for maximum load values during installation. They are the perfect choice for applications requiring high shear or uplift resistance.
The 5/16" hex drive screw features a Quik Guard® coating for corrosion protection and a 5/8" diameter integral washer head. It is designed for use with steel decking or other cold-formed steel framing, as well as connectors to structural steel.
It's important to note that hardened fasteners, including these screws, may experience performance issues in wet or corrosive environments. Therefore, the Strong-Drive XL Large-Head Metal Screw should only be used in dry, interior, and non-corrosive environments.
The Steel Deck Institute recognizes Simpson Strong-Tie as an approved manufacturer of screws used for steel decking. This recognition is reflected in the 4th Edition of the Diaphragm Design Manual (SDI-DDM04).
For installation, the compatible driver bit is BITHEXR516-R1, and the screw is also available collated for the Quik Drive® system.
Understanding the Versatile Number 12 Screw Size
You may want to see also
5/16 hex drive
The Strong-Drive XL Large-Head Metal Screw by Simpson Strong-Tie is a fastening system designed for demanding metal-to-metal applications. The screw features a 5/16" hex drive and is load-tested and code-listed, ensuring maximum load values for installation.
The 5/16" hex drive is a crucial component of the Strong-Drive XL screw, providing the necessary torque and grip for secure fastening. This hex drive size is compatible with specific driver bits, such as the BITHEXR516-R1 or BITHEXLB516, ensuring easy installation.
The 5/16" hex drive also contributes to the screw's overall performance and versatility. The Strong-Drive XL screw is an excellent choice when high shear or uplift resistance is required, making it a reliable option for metal decking, steel framing, and structural steel connections.
Additionally, the Strong-Drive XL Large-Head Metal Screw is available in collated form for the Quik Drive system, providing convenience and efficiency during installation. It's important to note that these screws are designed for dry, interior, and non-corrosive environments, as hardened fasteners may experience performance issues in wet or corrosive conditions.
Flat Head Screw: Chrome 8 1/2-Inch Size
You may want to see also
Quik Guard® coating for corrosion protection
The Quik Guard® coating on the Strong-Drive XL Large-Head Metal Screw provides corrosion protection for the screw. This is particularly important as industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Therefore, the Strong-Drive XL Large-Head Metal Screw should only be used in dry, interior, and non-corrosive environments.
The Quik Guard® coating is just one of the many features that make the Strong-Drive XL Large-Head Metal Screw a reliable fastening solution. The screws are load-tested and code-listed, ensuring maximum load values for installation. They are designed to provide high shear and uplift resistance, making them ideal replacements for pins.
The 5/16" hex drive screw features a 5/8" diameter integral washer head, allowing for easy driving and a secure hold. The screw's strong grip and pull-out strength make it suitable for steel decking and cold-formed steel framing applications.
With its Quik Guard® coating and structural performance, the Strong-Drive XL Large-Head Metal Screw offers a robust fastening option for specific environmental conditions. While it is important to consider the limitations of using this product in wet or corrosive environments, it is a dependable choice for dry and interior applications.
The Simpson Strong-Tie brand stands behind the quality and performance of their products, including the Strong-Drive XL Large-Head Metal Screw with the Quik Guard® coating. This screw is a trusted solution for metal-to-metal applications where corrosion protection and high load-bearing capacity are required.
Standard Screwdriver Sizes: What's the Average Length and Width?
You may want to see also
Frequently asked questions
The Strong-Drive XL Large-Head Metal Screw is used for metal-to-metal applications. It is load-tested and code-listed, making it ideal for installations requiring high shear or uplift resistance.
The head type is Hex Washer and the drive type is 5/16" Hex.
The screw is made of metal. It features the Quik Guard® coating for corrosion protection.