Tj Window Screw Size: A Comprehensive Guide

The screw size for a Jeep Wrangler TJ window depends on the specific model year and type of screw. For example, the screw size for the windshield hinge screw on a 1997-2006 TJ is 5/16 2.3 x 1.5 cm, while the screw size for the interior door pull strap on a TJ is M4.2-1.41x13. It's important to verify the correct screw size for your specific model and application before purchasing or installing screws.

Jeep Wrangler TJ windshield hinge screw size

The windshield hinge screws on a Jeep Wrangler TJ have a Torx head. The exact screw size depends on the year your Wrangler was manufactured.

Jeep Wrangler YJ and TJ (1987-2006)

The screw size for the windshield frame on a 1987-2006 Jeep Wrangler YJ and TJ models is M8 - 1.25. The screws are flanged and serrated so they can perfectly hold the lower windshield frame to the Jeep's body.

Jeep Wrangler CJ/YJ/TJ (1976-2006)

The screw size for the windshield hinge on a 1976-2006 Jeep Wrangler CJ/YJ/TJ is 5/16. The screws are made from premium automotive-grade steel and have a no-thread design at the end to prevent damage when pushing the hinge into the windshield or door panel.

Jeep Wrangler TJ (1997-2006)

The screw size for the hood hinge on a 1997-2006 Jeep Wrangler TJ is 5/16. The screws are made from stainless steel.

Screw size for interior door pull strap

The screw size that holds the interior door pull strap on a TJ is M4.2-1.41x13. The best option is to remove one and take it to a hardware store to find a matching screw.

The door pull strap is affixed using the factory arm rest screw. The arm rest uses two different lengths of screws, 25mm for the two lower holes and 40mm for the upper hole. The upper hole is used to attach the door pull strap.

The door pull strap can be secured using a 1/4-20 screw, although finding a tap for this screw size can be difficult. Alternatively, you can drill and tap the hole to 1/4-20 and thread the screw until it interferes, using epoxy to secure it.

For a simpler option, you can use plain red or black door pull straps reinforced with a brass grommet and washer. This option exposes the hardware but may be preferred by some.

Screw size for dash bolts

The screw size for dash bolts depends on the make and model of your Jeep Wrangler.

Jeep Wrangler JK (2007-2018)

For the Wrangler JK, the screw size for the self-tapping screw under the lift-out tray on the top of the dash is 4mm x 19mm. The power window switch screws are also likely to be the same size.

Jeep Wrangler YJ (1987-1995)

For the Wrangler YJ, the dash panel bolts are 1 inch in length, with a .5-inch height and width. These bolts have a TORX head and a washer.

Jeep Wrangler TJ

For the Wrangler TJ, the dash screws are described as "skinny shaft and coarse thread". The hex heads take a 1/4" socket (7mm is too large, 6mm is too small).

Screw size for power window switches

The screw size for power window switches depends on the make and model of the car.

Jeep Wrangler

For example, the Jeep Wrangler TJ uses a variety of screw sizes for its windshield and door hinges, including M8 - 1.25 and 5/16-18 x 7/8. The Jeep Wrangler CJ/YJ/TJ uses 44 stainless steel torx screws for its windshield frame and hinge, which are longer than the factory door screws. These screws have a thread diameter of #6 and 32 threads per inch.

Other Cars

Other cars, such as the Jeep Gladiator, Jeep Grand Cherokee, and Jeep Liberty Sport, may use similar screw sizes for their power window switches, but it is always best to check the specific make and model to be sure.

Electrical Switch Plate Screws

Electrical switch plate screws are typically 6-32 (thread diameter of #6 and 32 threads per inch) and have a countersunk angle of 82. The length of the screw will depend on the device being covered. For example, a 5/16" screw is typically used for strap mount plates, while a 1/2" screw is used for box or device mount plates.

Light Switches and Plug Sockets

Light switches and plug sockets typically use standard size M3.5 (3.5mm) diameter screws, although the lengths may differ. These screws have a raised countersunk head and are usually nickel, zinc, or brass plated.

Screw size for door hinges

The correct screw size is crucial for the stability and function of door hinges. While there are many screw varieties on the market, not all are suitable for hinges.

Standard Door Hinge Screws

Standard door hinge screws are typically one inch long, which accommodates most hinges. Entrance door screws are typically #9 or #10 screws. However, if you have a heavier door, you will need a larger screw.

Screw Length and Diameter

The length of the screw is important. If the screw is too short, it will be ineffective, and if it is too long, it may poke through the other side or damage the wood. The diameter of the screw and its head also play a role in the strength of the screw. Generally, the wider the diameter and the head, the more secure the screw.

Internal vs. External Door Hinges

External door hinge screws often need to be longer and wider than internal door hinge screws because external doors are usually much heavier and reinforced with metal.

Door Size and Weight

The size and weight of the door also impact the screw size. Larger doors will likely need a larger and wider screw, while smaller and narrower doors, like cabinet or pantry doors, will need a smaller screw. The weight of the door is also a factor—heavier doors require longer and thicker screws for security and stability.

Screw Materials

When choosing the metal for your door hinge screws, opt for a weatherproof metal with a coating if the screws will be used outdoors to prevent rust. Ensure that the screw and hinge are made of the same metal to avoid corrosion.

Jeep Wrangler TJ Door Hinge Screws

If you are looking for door hinge screws for a Jeep Wrangler TJ, you can find kits with 16 or 44 screws. These screws are made of stainless steel and are compatible with Jeep Wrangler CJ, YJ, and TJ models from 1976 to 2006.

Frequently asked questions