
Traxxas offers a range of rod ends and hollow balls for RC vehicles, with screws included in some sets. The size of the rod end screw is determined by the width of the screw, which is measured in millimeters (mm). For example, the Traxxas 5347 rod ends come with hollow balls and are large with a size of 3mm. It's important to consult the user manual when replacing parts for Traxxas vehicles to ensure the correct screw size is used.
Characteristics | Values |
---|---|
Number of Rod Ends | 16 long & 4 short |
Hollow Ball Connectors | 18 |
Ball Screws | 2 |
Part Number | 1942 |
What You'll Learn
Traxxas Rod End Set (16 long & 4 short)
The Traxxas Rod End Set (16 long & 4 short) includes 18 hollow ball connectors and two ball screws. The set replaces worn or damaged parts and is made from high-quality materials, ensuring long-lasting performance.
This product is designed as a replacement hardware part for Traxxas vehicles. It is compatible with a wide range of Traxxas models, including the 4-Tec 2.0 AWD Chassis, Bandit VXL, Rustler 4X4, Slash 4X4, and many others. Please consult your user manual for exact parts listings to ensure compatibility with your specific Traxxas vehicle.
The set includes:
- 4 short rod ends (17mm)
- 16 long rod ends (19mm)
- 2 ball screws
- 18 hollow ball connectors
The Traxxas Rod End Set offers a cost-effective solution to upgrade or repair your Traxxas vehicle, ensuring smooth and reliable performance. With its durable construction and precise fit, this set will enhance the overall driving experience and extend the lifespan of your Traxxas model.
Choosing the Right Drill Bit Size for 3/8" Lag Screws
You may want to see also
Traxxas 5347 Rod Ends with Hollow Balls
The Traxxas 5347 Rod Ends with Hollow Balls are a set of twelve large Revo rod ends with hollow balls. They are made from high-quality materials and are designed to be long-lasting replacement hardware for Traxxas vehicles. The rod ends are compatible with a variety of Traxxas models, including the Slash, Revo, and Stampede. They can also be used for custom builds and are a great option for rock crawlers.
The Traxxas 5347 Rod Ends with Hollow Balls are a popular choice for RC enthusiasts, with many positive reviews highlighting their strength, reliability, and performance. They are a great option for those looking for durable and well-built parts. The rod ends have a width of 10mm at the ball joint and are made of plastic.
These rod ends are a fantastic replacement for stock pieces, offering more freedom of movement and articulation for suspension links. They are also a great option for custom suspension links, providing more flexibility and durability. The Traxxas 5347 Rod Ends with Hollow Balls are a must-have for RC enthusiasts looking to enhance their vehicle's performance and durability.
It is important to note that these rod ends are not suitable for all projects. Some users have found them to be too thin for their needs, especially for monster truck projects. It is crucial to ensure that the rod ends are compatible with your vehicle and meet your specific requirements.
The Ultimate Guide to Understanding Bolt and Screw Sizes
You may want to see also
Traxxas 5525 Rod Ends and Hollow Balls
The Traxxas 5525 Rod Ends and Hollow Balls are a 12-piece, 321-pack set of replacement parts for Traxxas RTR vehicles. The product includes 12 rod ends and 12 hollow balls, which are assembled together. The rod ends are constructed from black nylon.
The Traxxas 5525 Rod Ends and Hollow Balls are compatible with a range of Traxxas models, including the Drag Slash 1967 Chevrolet® C10 Truck, the Ford® F-150 Raptor, the Rustler® 4X4 VXL, and the Slash 4X4 Ultimate. The product is also suitable for use with the Traxxas Ford F-150 Raptor, the Traxxas Slash 4x4 Ultimate, the Traxxas Stampede 4x4, the Traxxas Stampede VXL, and the Traxxas Telluride 4x4.
It is important to note that the compatibility of these parts with specific vehicles should be verified before purchase.
Reviews for the Traxxas 5525 Rod Ends and Hollow Balls are generally positive, with many customers finding them to be a great replacement for their Traxxas vehicles. Some customers have noted that the product is a good option for making crawler links, and that they hold up well even on heavy builds. However, one review mentions that only 4 out of the 12 hollow balls were of the "captured" or "flanged" variety, which may be important for certain applications.
Dimarzio Humbucker Mounting: Getting the Right Screw Size
You may want to see also
Traxxas 1942 - Rod Ends & Hollow Ball Connectors, Long / Short
The Traxxas 1942 Rod Ends & Hollow Ball Connectors, Long / Short set is a replacement part for many Traxxas models, including the BIGFOOT® No. 1 Officially Licensed Replica, the Ford Fiesta® ST Rally, the TRX-4® 1979 Chevrolet Blazer, and more. The set includes 16 long and 4 short rod ends, 18 hollow ball connectors, and 2 ball screws. The long rod ends are 19mm, while the short rod ends are 17mm.
It is important to inspect the rod ends that are threaded to the steering tie rods for signs of wear. Dirt and road grime can get lodged between the hollow ball connectors and rod ends, preventing the smooth pivoting of the hollow ball connectors. This can lead to suspension binding and unnecessary strain on the steering servo. Conversely, a worn-out rod end can cause play between the hollow ball connector and rod end, resulting in unnecessary slop in the steering system.
The Traxxas 1942 Rod Ends & Hollow Ball Connectors set provides a durable solution for these issues, with many customers reporting its long-lasting performance and ease of installation. It is always a good idea to have these parts in your toolbox, ensuring you are prepared for any necessary replacements or upgrades.
Choosing the Right Square Drive Size for 1/4-Inch Screws
You may want to see also
Traxxas Rod End/Ball Screw & Con:TMX.15,2.5,SLH
The Traxxas Rod End/Ball Screw & Con:TMX.15,2.5,SLH is a set of rod ends and hollow ball connectors for the front and rear of the Nitro T-Maxx. The set includes four short rod ends (17mm), 16 long rod ends (19mm), two ball screws, and 18 hollow ball connectors. The short rod ends have a length of 0.695" (17.6mm) and an inner diameter of 0.217" (5.5mm). The product has received positive reviews, with 4.9 out of 5 stars and 36 ratings on Amazon. It is also available for purchase on Horizon Hobby, Noon, and AMR RC.
The Traxxas Rod End/Ball Screw & Con:TMX.15,2.5,SLH is a replacement part for various Traxxas vehicles, including the Traxxas 24054, 24054T1, 24054T2, 24054T3, 24054T4, 24054T6, 2405T1, 2405T3, 2405T4, 2405T5, and 2405T6. The product is made of black nylon and includes six nylon rod ends and six steel pivot balls. It requires turnbuckles for installation, specifically the TRAC6338 turnbuckles.
The Traxxas Rod End/Ball Screw & Con:TMX.15,2.5,SLH is a popular choice for custom builds and has received positive feedback for its quality and fast shipping. It is important to note that this particular product is only compatible with the Nitro T-Maxx and will not work with other Traxxas models.
When considering purchasing the Traxxas Rod End/Ball Screw & Con:TMX.15,2.5,SLH, it is essential to verify the compatibility with your specific Traxxas model. Additionally, it is recommended to refer to the product specifications, such as the length and inner diameter, to ensure that the rod ends and hollow ball connectors will fit your application.
Overall, the Traxxas Rod End/Ball Screw & Con:TMX.15,2.5,SLH appears to be a reliable and well-received product, offering a combination of rod ends and hollow ball connectors that are compatible with specific Traxxas vehicles, particularly the Nitro T-Maxx.
Drone Motor Screw Size: What You Need to Know
You may want to see also
Frequently asked questions
The Traxxas rod end screw size is given as 1942. This refers to a set of Traxxas Rod Ends with 16 long and 4 short rods, 18 hollow balls, and 2 ball screws.
The Traxxas 5347 rod end is a large 3mm screw.
The Traxxas 1942 rod end screw size is given as M4x0.7mm.
The Traxxas 5347 rod ends are large, designed for the Revo model, and come in a set of 12. The Traxxas 1942 rod ends come in a set of 20 (16 long and 4 short) and are suitable for a range of Traxxas vehicles.