Choosing Washers For Your 10-32 Pan Head Screws

Washers are essential components in any fastening application, and choosing the right one for your screw can be a challenge. If you're looking for a washer to fit a 10-32 pan head screw, you'll want to consider the specific type of screw you're using, as well as the conditions it will be exposed to. For instance, if corrosion is a concern, you might opt for a stainless steel screw, while a zinc-plated screw could be a better fit for a more polished look. Understanding the specific requirements of your project will help you select the most suitable washer for your 10-32 pan head screw, ensuring a secure and long-lasting fastening solution.

#10-32 Phillips Pan Head Machine Screw 18-8 Stainless Steel

#10-32 Phillips Pan Head Machine Screws are made from high-grade 18-8 (304) stainless steel and feature a Phillips drive. The pan head design provides a larger bearing surface and a neat, finished appearance. These machine screws are ideal for use in pre-threaded holes or with nuts, providing a secure and precise fastening solution for metal, plastic, and other materials.

The #10-32 Phillips Pan Head Machine Screws are fully threaded with a blunt end. The pan head design is ideal for applications where a flat-bottomed, slightly rounded top surface is desired. The #10-32 size, with its fine thread, is commonly used in applications requiring greater thread engagement and strength, such as electronics, precision machinery, equipment assembly, automotive and aerospace industries, metal and plastic fabrication, furniture and cabinetry, and DIY projects and repairs.

Crafted from 18-8 stainless steel, these screws are corrosion-resistant and suitable for both indoor and outdoor use. The Phillips head design reduces the chance of slipping, making installation easier. The screws are available in various lengths, from 3/16" to 4", ensuring a perfect, secure fit for any project.

Additionally, matching washers and #10-32 nuts can be found at the respective websites of the retailers.

#10-32 Phillips Pan Head SEMS Screws with Internal Tooth Lock Washers

If you're looking for a washer that will fit a #10-32 pan head screw, then #10-32 Phillips Pan Head SEMS Screws with Internal Tooth Lock Washers could be the perfect product for you. Here's everything you need to know about them:

Product Overview:

These screws are designed with convenience and efficiency in mind. They feature a pre-assembled internal tooth lock washer that sits beneath the head of the screw. This design saves time and effort by eliminating the need to assemble the screw and washer separately. This feature is especially valuable in manufacturing, production, and on large job sites, where efficiency and speed are crucial.

Product Specifications:

These screws meet the following standards: ASME B1.1, ASME B18.13, and ASME B18.6.3. Here are the detailed specifications:

• Head Diameter: Max 0.373 - Min 0.357
• Head Height: Max 0.133 - Min 0.122
• Drive Style: Phillips
• Thread Diameter Major: Max 0.1890 - Min 0.1818
• Thread Diameter Minor: Max 0.1619 - Min 0.1586
• Thread Pitch: 32 per inch
• Thread Type: UNF (Fine)
• Washer Type: Internal Tooth Lock Washer
• Washer Outside Diameter: Max 0.383 - Min 0.372
• Washer Thickness: Max 0.024 - Min 0.018

Materials and Plating:

The screws are made from grade AISI 1022 Low Carbon Steel, which provides strength and durability. They are then zinc-plated to enhance corrosion resistance and protect the fasteners. This plating process ensures that the screws can withstand various environmental conditions.

Volume Pricing:

AlbanyCountyFasteners, the manufacturer, offers volume pricing discounts. The larger the pack you purchase, the lower the cost per piece. This pricing structure makes it economical to buy in bulk, and it's always good to have some spares on hand for future projects.

#10-32 Phillips Pan Head SEMS Screws with External Tooth Lock Washers

The #10-32 Phillips Pan Head SEMS Screws with External Tooth Lock Washers are ideal for bulk projects and production lines. They provide greater torsional resistance than internal tooth lock washers. The integrated lock washer makes these SEMS screws function as lock screws or locking screws.

These screws are made from grade AISI 1022 Low Carbon Steel and are plated with zinc, adding corrosion resistance, durability, and protection. The zinc plating also enhances the screws' aesthetic appeal.

The #10-32 Phillips Pan Head SEMS Screws with External Tooth Lock Washers meet the following standards: ASME B1.1, ASME B18.13, and ASME B18.6.3. The head diameter measures between 0.357 and 0.373, and the head height ranges from 0.122 to 0.133. The thread diameter major is #10, with a maximum of 0.1890 and a minimum of 0.1818. The thread diameter minor is also #10, with a maximum of 0.1619 and a minimum of 0.1586. The thread pitch is 32 per inch, and the thread type is UNF (Fine).

The washer outside diameter measures between 0.365 and 0.381, while the washer thickness ranges from 0.018 to 0.024. These SEMS screws are available in packs of 250, offering a cost-effective solution for bulk projects.

Hillman #10-32 Phillips Pan-Head Machine Screws

Hillman offers #10-32 Phillips Pan-Head Machine Screws in a variety of lengths and pack sizes. The screws are made of stainless steel, which provides a polished look and corrosion protection. They are engineered for metal-on-metal applications and can be fastened with a screwdriver to reduce the risk of over-tightening.

The Hillman #10-32 Phillips Pan-Head Machine Screws are available in 1-inch and 2-inch lengths. The 1-inch screws come in a pack of 20, while the 2-inch screws come in a pack of 8. These screws can be purchased from The Home Depot, both in-store and online, with free and easy returns.

Additionally, Hillman offers #10-32 Phillips Pan-Head Machine Screws in a 1-1/2-inch length, which are available on Amazon. These screws are also made of stainless steel and come in a box of 100.

When using the #10-32 Phillips Pan-Head Machine Screws, it is recommended to refer to the specific measurements provided by the manufacturer to ensure the correct fit for your application. The thread diameter major is #10, with maximum and minimum measurements, and the thread diameter minor is also #10, with maximum and minimum values specified. The thread pitch count may vary slightly depending on the production run.

#10-32 Phillips Pan Head Machine Screws

Machine screws, in general, are designed for metal-on-metal applications, and the use of stainless steel provides a polished look and corrosion protection. When fastening these screws, it is recommended to use a screwdriver to reduce the risk of over-tightening.

When purchasing these screws, it is important to consider the volume of your order. Many retailers offer discounts for bulk purchases, allowing you to get a lower cost per piece when buying in larger quantities.

Frequently asked questions