The Perfect Fit: Ultra Saber Screw Sizes Explored

The blade retention screw size of an Ultra Saber is important to know as it helps you select the right size hex key to tighten or loosen the screw. Ultrasabers use 8-32 blade retention screws on many of their basic to mid-range lightsabers, but their more premium lightsabers use a larger diameter screw. The blade retention screw is installed near the top of the lightsaber hilt in the emitter area. When removing the blade, you typically only need to unscrew the blade retention screw just far enough to remove the blade. It is not recommended to remove the screw altogether from the hilt, as they are very small and easy to lose. Ultrasabers offers a blade retention screw wrench for $1.

Ultrasabers uses 8-32 blade retention screws on its basic to mid-range lightsabers

A blade retention screw is a small screw that attaches a lightsaber blade to its hilt. Ultrasabers uses 8-32 blade retention screws on its basic to mid-range lightsabers. This is the most common size of blade retention screw, with various styles and lengths available.

It is important to know the size of the blade retention screw so that you can select the correct size hex key to tighten or loosen the screw. You also need to know whether the screw uses the Imperial or Metric system. For example, many lightsabers use a 5/64" hex key (also known as an Allen wrench) to tighten or loosen the blade retention screw. You can usually buy a hex key for a small price from the custom saber company, or you may be able to purchase one from a hardware store. Hex key multi-tools can also be useful for tightening or removing blade retention screws of various sizes.

Ultrasabers offers a range of hilt options, from kids' sizes to basic and fancy hilts. The basic hilts include the Initiate, Apprentice, Aeon/Dominix, Sentinel, and Liberator, with prices starting at under $100. The Liberator, for example, is available with a basic hilt, no sound, and no colour configurability for $97. The same hilt with sound and colour configurability is $432. Ultrasabers also offers a range of blade retention screw wrenches for $1.

It is important to note that different custom saber companies and even different lightsaber hilt models within the same company may use different screw sizes from the standard 8-32 size. For instance, Ultrasabers' Emperor's Hand, Graflex SE, and other premium lightsabers use a larger diameter screw than the standard 8-32 size.

Ultrasabers' premium lightsabers use a larger diameter screw

Ultrasabers premium lightsabers use a larger diameter screw than the standard 8-32 size. This is because they are more premium lightsabers, such as the Emperor's Hand, Graflex SE, and other more high-end models. The larger diameter screw adds stability and security to the lightsaber, ensuring that the blade is securely attached to the hilt. This is especially important for premium lightsabers, which are often used for more intense combat and performance purposes.

The blade retention screw is a critical component of any lightsaber, allowing users to attach and remove the lightsaber blade from the hilt. It is typically located near the top of the hilt in the emitter area. The standard size for blade retention screws is 8-32, which is used by Ultrasabers for many of their basic to mid-range lightsabers. However, their premium lightsabers require a larger diameter screw, which is not as commonly used by other custom saber companies.

It is important to know the correct blade retention screw size when assembling or repairing a lightsaber. This ensures that the proper tools, such as the correct size hex key, can be used to tighten or loosen the screw. Additionally, it is crucial to know whether the screw uses the Imperial or Metric system, as this can vary between different lightsaber models and companies. Using the wrong tools or attempting to force a screw that doesn't fit properly can damage the lightsaber or result in an unstable connection between the blade and the hilt.

The Ultrasabers premium lightsabers, such as the Emperor's Hand and Graflex SE, are designed for those who demand the highest quality and performance from their lightsabers. By using a larger diameter screw, Ultrasabers ensures that these premium lightsabers meet the expectations of their users. This attention to detail and commitment to quality are part of what sets Ultrasabers apart in the lightsaber community.

Additionally, Ultrasabers offers a wide range of customization options for their lightsabers, allowing users to create a truly unique and personalized experience. From different hilt designs to various lightsaber colors, Ultrasabers provides endless possibilities for those seeking to harness the power of the Force. With their premium lightsabers and commitment to quality, Ultrasabers continues to be a trusted choice for Jedi and Sith Lords alike.

Blade retention screw size is important for selecting the correct size hex key

It is also important to know whether the blade retention screw uses the Imperial or Metric system, as this will determine the size of the hex key required. Additionally, the correct blade retention screw length is crucial for a specific lightsaber hilt model. When removing the blade, typically only unscrew the blade retention screw far enough to remove the blade, rather than removing the screw completely, as these screws are small and easy to lose.

A 5/64" hex key is commonly used to tighten or loosen a blade retention screw, and these can often be purchased inexpensively from hardware stores or custom saber companies. Hex key multi-tools can also be useful for working with blade retention screws, as they provide various sizes and can be purchased for a low price.

It is worth noting that some lightsabers may require a different approach to tightening or loosening the blade retention screw. For instance, in a situation where the screw has been over-tightened and has pierced the blade, it is recommended to remove the screw, turn the blade around, and then screw it back in without piercing the blade.

Ultrasabers' basic hilts include the Initiate, Apprentice, Aeon/Dominix, Sentinel, and Liberator

Ultrasabers offers a wide range of lightsabers, including both basic and premium models. The basic hilts include the Initiate, Apprentice, Aeon/Dominix, Sentinel, and Liberator. These hilts are perfect for those looking for a more affordable option, with starting prices below $100.

The Initiate and Apprentice hilts are great choices for those interested in stage combat, as they offer thinner and shorter hilts. The Initiate V2 is also a good option for kids, with a diameter of 1.25" compared to the standard 1.45" of the other hilts. The Apprentice is available in different versions, with the latest being the Apprentice V5, which is currently on sale for $74.38.

The Aeon and Dominix are two similar hilts, with the Aeon being the basic model and the Dominix being the fancier option. The Aeon is also available with sound for $282, while the Aeon V4 is on sale for $71.72. The Dominix V4 is priced at $74.38.

The Sentinel is another popular choice and is currently available in two versions, with the Sentinel V4 on sale for $71.72 and the Sentinel V5 priced at $73.94.

Lastly, the Liberator is a basic hilt that comes in a dark variant and is perfect for those on a budget. The Liberator V3 is currently on sale for $79.69.

It's important to note that Ultrasabers offers a range of customization options for their lightsabers, including color, sound, and various features. The blade retention screw size is also an important consideration, as it determines the proper size of the hex key needed for tightening or loosening the screw. Ultrasabers typically uses 8-32 blade retention screws on their basic to mid-range lightsabers, but some premium models use a larger diameter screw.

Ultrasabers' kids' hilts, Initiate V2s, have a 1.25 diameter

Ultrasabers offers a wide range of lightsabers and lightsaber parts for Star Wars fans, collectors, and cosplayers. Their products include lightsabers for children, with softer materials and tips to ensure safety during play and role-playing.

Ultrasabers' Initiate V2 lightsabers are specifically designed for kids, with a 1.25" diameter hilt. This is in contrast to their other hilts, which have a diameter of 1.45". The 0.20" difference in size is noticeable and makes the Initiate V2 a better fit for smaller hands.

The Initiate V2 lightsabers are currently on sale for $53.13, reduced from the original price of $62.50. Ultrasabers also offers a Dark Initiate V2 lightsaber, which is also on sale for $55.79, down from $65.63. These lightsabers are a great option for those looking for a more affordable and kid-friendly lightsaber option.

It's important to note that Ultrasabers' products are designed for customization, with various colors, sounds, and other features available to choose from. The company uses durable materials, such as aircraft-grade aluminum and polycarbonate blades, ensuring that their lightsabers are battle-ready and suitable for heavy combat or cosplay.

In addition to the Initiate V2 lightsabers, Ultrasabers offers a range of other hilts, including the Basic and Fancy varieties. The Basic hilts include models such as the Initiate, Apprentice, Aeon/Dominix, Sentinel, and Liberator, with prices starting below $100. The Fancy hilts include the rest of their extensive collection, with prices varying depending on the chosen options.

Frequently asked questions