Ikea Attest: What Size Screws Are Included?

IKEA uses standard metric screws that can be easily replaced with ones purchased from a hardware store. However, finding the right screw size can be challenging. IKEA provides screw sizes in the assembly manual, but if you've misplaced the manual, you can identify the correct screw size by measuring the diameter and length of the screw. IKEA offers a range of screw types, including wood screws, machine screws, and cam screws, with sizes varying depending on the furniture piece. For example, wood screw sizes range from 12mm to 60mm, while machine screw diameters range from 4mm to 8mm.

IKEA uses metric screws, which can be replaced with hardware store purchases

IKEA uses metric screws that can be replaced with hardware store purchases. The Swedish furniture giant provides a variety of screws in different sizes, and it is crucial to use the right ones for a seamless assembly experience. IKEA's screws are standardised and vary in millimeters, making it easy to find a replacement at a local hardware store.

IKEA screw 105163 is a standard M6 x 10 (6mm diameter x 10mm in length) screw. It is commonly used in various IKEA products and can be purchased at hardware stores or online retailers. It is typically made from stainless steel and is available in flat head, hex head, and socket head varieties.

IKEA screw 117327 is a standard M4 x 6 screw. The original is self-tapping, but a standard screw will work as a replacement. This screw is commonly available at hardware stores.

IKEA screw 110789 is a standard M6 x 18 wood screw. It can be replaced with a standard U.S. #10 x 0.75" screw, although some users have reported that this replacement is too short. The IKEA screw 110789 has a coarse thread, ensuring a strong grip and pull-out resistance, and it is zinc-plated for corrosion resistance.

IKEA nut 114254 is a standard M8 nut, specifically a hex nut with six sides, designed to be tightened or loosened with a wrench or socket. It is typically used with bolts or screws that have a threaded shaft.

IKEA plastic cap 102267 can be replaced with an M6 protective cap, which can be found at IKEA or third-party sellers, as well as local hardware stores. This plastic cap is commonly used in IKEA bed frames, such as the MALM, SONGESAND, HEMNES, and BRUSALI.

When purchasing replacement screws, it is important to consider the type of head and length required for your specific IKEA product. Additionally, consider using plastic covers to conceal the screw head and provide a finished look to the furniture.

While IKEA does offer official spare parts that can be ordered directly from their website, they may not always be available, and there can be variability in delivery times. Therefore, purchasing standard metric screws from a hardware store can be a convenient and quick solution for replacing IKEA screws.

Screw sizes are in the assembly manual, but can be found by measuring diameter and length

When assembling IKEA furniture, it is crucial to use the correct screw size to ensure a seamless assembly experience. IKEA provides screw sizes in the assembly manual, which can be easily referenced to identify the required screw type and dimensions. However, if you have misplaced the manual, there is no need to panic. You can still determine the correct screw size by taking a few simple measurements.

IKEA uses standard metric screws, which can be replaced with screws purchased from a local hardware store or directly from IKEA. The challenge lies in identifying the correct screw size. This can be accomplished by measuring two key dimensions: the diameter and the length of the screw.

The diameter of a screw, typically measured in millimetres (mm), determines its thickness. It is crucial to match the correct diameter to ensure a secure and proper fit. A screw that is too thin may not provide adequate stability, while a screw that is too thick may damage the furniture or compromise the integrity of the assembly.

The length of the screw is another critical factor. Screw length is mentioned in millimetres (mm) and can vary widely depending on the specific furniture piece and screw type. Referring to the assembly manual or the IKEA Screw Size Chart will provide guidance on the appropriate screw length for your particular piece of furniture.

It is worth noting that IKEA furniture typically uses three types of screws: wood screws (Type A), machine screws (Type B), and cam screws (Type C). Wood screws are designed for wooden parts like shelves, table legs, and bed frames, and have a coarse thread for better grip in wood. Machine screws, on the other hand, are used for attaching metal parts or hinges and feature a finer thread, often accompanied by nuts. Cam screws are unique to IKEA furniture and are used to secure cam locks, typically with specific lengths of 27mm or 30mm.

By measuring the diameter and length of the screws and referring to the assembly manual or the IKEA Screw Size Chart, you can confidently select the correct screw size for your IKEA furniture assembly project. This will ensure a smooth and hassle-free experience, resulting in sturdy and aesthetically pleasing furniture.

Screw length is crucial for determining its usability in a particular piece of furniture

When it comes to assembling furniture, selecting the appropriate screw length is crucial. The screw length determines whether the screw will be compatible with the furniture's design and ensure a seamless assembly.

The screw length is the measurement from the tip of the screw to the bottom of the screw head. This length is essential because it determines how far the screw will reach into the furniture's material, typically wood or metal. If the screw is too short, it may not securely hold the furniture pieces together. On the other hand, if the screw is too long, it may pierce through the other side, damaging the furniture and compromising its structural integrity.

When selecting the appropriate screw length, it's important to consider the type of connection and the depth of the material. For example, metal-to-metal connections require a maximum load-bearing length, which is the thickest amount of material that can be fastened securely. In contrast, metal-to-wood connections have a minimum embedment requirement, ensuring that the screw is securely fastened into the wood.

The length of the screw also depends on the type of wood and the forces acting on the connection. For instance, hardwoods like oak or walnut are prone to splitting, so a pilot hole is often drilled before driving the screw. On the other hand, softwoods like pine or cedar are less likely to split, so a pilot hole may not be necessary. Additionally, if the connection will be subjected to lateral or sheer pressure, such as kitchen wall cabinets attached to wall studs, thicker screws may be required to withstand the sliding motion.

In conclusion, screw length plays a critical role in determining its compatibility with a particular piece of furniture. By considering the type of connection, material depth, wood type, and forces involved, individuals can select the appropriate screw length to ensure a secure and aesthetically pleasing assembly.

Screw heads come in different shapes, and this determines the type of screwdriver needed

When it comes to screw heads, there is no one-size-fits-all. They come in various shapes and sizes, each serving a specific function. Understanding the different screw head types is crucial for selecting the appropriate screwdriver for assembly or disassembly.

The two primary screw head designs are countersunk and non-countersunk. Non-countersunk screw heads are fully exposed and sit above the bonding material's surface. This category includes a wide range of head styles, such as binding, button, cheese, fillister, flange, hex, pan, round, socket, and truss heads. Non-countersunk screws are typically used when easy removal is necessary or when the appearance of the screw is not a priority. They are commonly employed in furniture making and consumer electronics, where their protruding head aids in better load distribution.

On the other hand, countersunk screw heads are designed to be level with the surrounding surface, creating a flush finish. Countersunk designs mainly consist of flat, oval, and bugle heads. Flat and oval head screws require a countersunk hole, ensuring that the head does not protrude beyond the material's surface. Bugle heads are commonly found in drywall screws and automatically create their own countersunk hole during installation.

The shape of the screw head also determines the type of screwdriver or tool required for installation or removal. Common drive styles include slotted, Phillips, combination, hex, hex socket, square, Torx®, and spanner. Using the correct screwdriver or tool is essential to prevent damage to the screw head. For example, a slotted screwdriver is used for slotted, combination, and one-way screws, while a Phillips screwdriver is needed for Phillips and combination screws.

In addition to the shape and drive style, the size of the screw head is also a factor to consider. Screw heads can vary in diameter and length, and choosing the appropriate size ensures a secure fit and proper torque application.

When working with IKEA furniture, for instance, understanding their screw types and sizes is essential for a seamless assembly experience. IKEA furniture typically uses wood screws (Type A) for wooden parts and machine screws (Type B) for attaching metal parts or hinges. Knowing the specific screw types, lengths, diameters, and head shapes will help you select the right screwdriver and achieve a sturdy and aesthetically pleasing result.

IKEA offers free official spare parts, but availability varies

IKEA offers a wide range of screws and fasteners to help with assembling, building, repairing, mounting, and hanging. They provide screw kits with commonly used sizes, making them a convenient option for various projects. The TRIXIG screw sets, for example, offer a variety of screws and plugs for different applications.

While IKEA offers free official spare parts, the availability of these parts varies. You can order smaller spare parts, such as screws, knobs, or plugs, at no cost using their self-service tool. These small spare parts will typically arrive at your address within 7 to 10 business days, or 3 to 5 days in the UK.

For larger spare parts, you may need to visit an IKEA store or contact their customer service centre. These parts are usually only available with proof of purchase and when the items are still under warranty. Additionally, if you require spare parts for IKEA appliances, you may need to contact the authorised service centre listed in the user manual.

To find a spare part number and order it, follow these steps:

• Search for the product on the IKEA homepage.
• Navigate to the 'product details' area.
• Find and open the 'assembly and documents' section to locate the spare part number.
• Use the spare part number to search for the desired part.
• Select the quantity needed and provide your address to receive the parts free of charge.

Frequently asked questions