Willys Pickup Headlight Bezel Screw Size Guide

Willys Jeep is a popular vehicle model with a range of variants, including the CJ3B, CJ5, CJ6, DJ3A, Truck, Station Wagon, FC, and Jeepster. When it comes to headlight bezel mounting screws, the specific size and type of screw required may vary depending on the make and model of your Willys Jeep. It is important to use the correct screws to ensure a secure fit and maintain the vehicle's aesthetics.

Willys Jeep Headlight Bezel Parts

Willys Jeep headlight bezels and their parts are available for purchase online. The headlight bezel is the outer ring of the headlight assembly, and it is typically made of chrome. Bezels are available for the following Willys Jeep models: CJ2A, CJ3A, CJ3B, CJ5, Willys Truck, Station Wagon, FC, and Jeepster.

Some headlight bezels are sold individually, while others are sold in pairs. It is important to note that the bezels are side-specific, meaning there are separate parts for the left and right sides of the vehicle. The bezels typically have an inner diameter of 7-1/4 inches and an outer diameter of 8-7/8 inches.

In addition to the bezels themselves, other related parts are also available. These include the headlight sealed beam retaining ring, headlight support bracket assembly (for both left and right sides), and the blackout light housing (for the left or right side).

When purchasing a headlight bezel, it is recommended to also replace the mounting screws to ensure a secure fit. The size and length of the screws will depend on the specific Willys Jeep model and year. It is important to refer to the vehicle's specifications or consult a specialist to ensure the correct parts are purchased.

Some sources provide detailed information about the compatibility of their headlight bezels and parts with specific Willys Jeep models and years. It is always recommended to verify the compatibility of any part before purchasing to ensure it fits your specific vehicle.

Headlight Bezel Screw Set

If you're restoring a Willys Jeep, you'll want to make sure you have the correct parts to secure your headlight bezels in place. The headlight bezel screw set is an important component of the installation process and will ensure your headlights are securely attached to your vehicle.

The headlight bezel screw set typically includes four black screws per headlight bezel, with a total of eight screws required to complete both the driver and passenger-side headlight bezels. These screws are specifically designed to attach the headlight bezels to the header panel, and it is recommended to replace them whenever you replace the bezel itself, whether due to cracks, accidents, or fading.

For the 1945-1953 Willys Jeep CJ2A and CJ3A models, you can find replacement chrome headlight bezels from vendors, which will likely include the appropriate mounting screws. Similarly, for the CJ3B, CJ5, CJ6, late DJ3A, Willys Truck, Station Wagon, FC, and Jeepster models, chrome headlight bezels are available, and they may come with the necessary mounting screws.

It's important to note that the size and thread pitch of the headlight bezel screws are very specific and can be challenging to find. For reference, the chrome bezel typically takes #8 x .75" self-tapping screws, while the plastic headlight housing uses #8 x 1.75" self-tapping screws.

Headlight Bezel Screw Size

The headlight bezel screw size you need depends on the make and model of your vehicle. For example, the 1984-2001 Jeep Cherokee and Comanche use #8 x .75" self-tapping screws for the chrome bezel and #8 x 1.75" self-tapping screws for the plastic headlight housing. These screws are very hard to find in the exact length and size, so it is recommended to replace them when replacing the headlight bezel for any reason.

If you are looking for the headlight bezel mounting screw size for a different vehicle, you may need to consult the vehicle's repair manual or contact the manufacturer. Additionally, there are online forums and communities dedicated to specific vehicle models where you can find information and advice on replacement parts and repairs.

It is important to use the correct screw size and type when replacing the headlight bezel screws to ensure a secure fit and avoid damage to the headlight assembly. Self-tapping screws are designed to create their own threads in the material they are driven into, providing a tight and secure fit. The length of the screw is also critical, as screws that are too long can cause damage, while screws that are too short may not provide sufficient clamping force.

When purchasing replacement screws, it is recommended to buy a complete set to ensure uniformity and an exact match. You can find these screws at automotive stores, hardware stores, or online retailers. Some vehicles may use specialty screws that are specific to the make and model, so it is always best to verify the correct screw type before purchasing.

Headlight Bezel Mounting Screws

If you're restoring or repairing a Willys Jeep, you'll want to make sure you have the right parts to get the job done. One important component is the headlight bezel mounting screws, which secure the headlight bezels to your vehicle.

Finding the Right Screws

To find the correct headlight bezel mounting screws for your Willys Jeep, it's important to know the specific model and year of your vehicle. Different models and years may require different types of screws. For example, the headlight bezel mounting screws for a 1945-1953 Willys Jeep CJ2A or CJ3A model may differ from those for a 1957-1975 Jeep CJ5, CJ6, or Willys model.

Screw Types and Sizes

Purchasing Screws

You can find headlight bezel mounting screws for your Willys Jeep through various retailers, including online stores and automotive parts suppliers. When purchasing, it's important to buy high-quality screws that meet the specifications for your vehicle. It's also a good idea to purchase a few extra screws in case of future loss or damage.

Installation

When installing your headlight bezel mounting screws, follow the manufacturer's instructions carefully. Ensure the screws are tightened securely, but be careful not to over-tighten, as this can strip the threads or damage the bezel.

By using the correct headlight bezel mounting screws and installing them properly, you can ensure that your Willys Jeep's headlights are securely held in place, enhancing your vehicle's appearance and safety.

Headlight Bezel Screw Replacements

The headlight bezel mounting screws for Willys pickups are an exact fit for the headlights. The standard-sized screws are sold in a set of six and are compatible with 1967-1968 Camaro models. These screws are manufactured to the highest quality standards.

If you are replacing your headlight bezel due to damage or old age, it is highly recommended that you replace the headlight bezel mounting screws at the same time. These screws are very specific in terms of length and size, and it can be hard to find exact replacements.

For 1984-2001 Jeep Cherokees and Comanche pick-up trucks, the headlight bezel screws come in a set of four, and you will need eight screws total for both the driver and passenger front headlight bezels.

You can also find headlight bezel mounting screws for rally sport models, compatible with 1967-1968 Camaro models. These screws are also manufactured to the highest quality standards.

Frequently asked questions