What Screw Size Does The X900h Require?

The Sony X900H comes with 4 screws already in the VESA holes and a set of 4 VS screws with a threaded end and a cylinder on the other side with threading on the inside. The length of the screw for the Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Some users have reported using M6 x 12mm screws with a washer, while others have used the screws that came with their mount. It is recommended to always use the screws supplied with the Sony wall mount, as the use of improper screws may result in injury or property damage.

Sony X900H mounting requires M6 screws

The Sony X900H comes with four screws already in the VESA holes, plus a set of four "VS" screws. These "VS" screws have a threaded end, with part of the screw painted red, and a cylinder on the other side with threading on the inside. These screws are included in the packaging with the instruction booklet and remote control. When mounting the Sony X900H, it is important to follow the instructions provided by Sony to ensure the safety of the person performing the installation and to avoid damage to the property.

It is recommended to use the screws supplied with the Sony wall mount. Improper use of screws may result in injury or damage to the television. The wall and the wall mount attachment mechanism must have the necessary strength to withstand four times the weight of the television, or six times in some models. It is always recommended to refer to the television's manual for specific details and instructions.

When mounting the Sony X900H, it is important to use the correct screw size and type. The standard screw size for this television model is M6, and the length of the screw will depend on the thickness of the wall mount bracket being used. It is recommended to refer to the product manual or a professional for specific instructions and guidelines on mounting the Sony X900H television.

The length of the screw depends on the wall-mount bracket thickness

When mounting your Sony X900H TV to a wall, the length of the screw you need depends on the thickness of your wall-mount bracket. The X900H comes with four screws already in the VESA holes, as well as a set of four "VS" screws. These have a threaded end, with part of it painted red, and a cylinder on the other side with threading on the inside. These screws are included in the packaging with the instruction booklet and remote.

If you are unsure about which screws to use, refer to the instruction manual or seek advice from a professional. It is important to follow the instructions carefully to avoid injury or property damage.

Some users have reported using M6 x 12mm screws with a washer, while others have used M6 screws that came with their mount. It is recommended to always use the screws supplied with the Sony wall-mount to avoid any issues.

When attaching the mounting brackets to the back of the TV, you may need to use the metal adapters that came with the TV. These metal adapters, or "standoffs", are intended to provide a flat and solid surface for the wall-mount bracket to attach to. They also help distribute the weight of the TV evenly across the attachment points.

When using these metal adapters, make sure to use the correct length of screw. Some users have reported that the M6 screws provided with the TV are too short and that longer screws, such as M6 x 16mm or M6 x 20mm, may be needed. However, it is important not to use screws that are too long, as this could damage the TV.

Always refer to the official product manuals and instructions for specific details on screw lengths and wall-mounting procedures.

Sony recommends using a professional for installation

Sony recommends that a qualified professional performs the installation of the wall-mount and the attachment of the television to the wall-mount. This is to ensure safety and avoid property damage.

The wall and the wall-mount attachment mechanism must have the necessary strength to withstand four times (six times in some models) the weight of the television. If the wall strength does not meet the requirements, make sure it's reinforced before installation. If needed, consult a licensed contractor for wall reinforcement information.

The Sony X900H comes with four screws already in the VESA holes, plus a set of four "VS" screws. These have a threaded end, part of which is painted red, and a cylinder on the other side with threading on the inside. The "VS" screws are metal adapters that should be used with the TV.

The length of the screw for the wall-mount bracket differs depending on the wall-mount bracket thickness. Always use the screws supplied with the Sony wall-mount, as the use of improper screws may result in injury to persons and damage to property.

Sony does not recommend the use of third-party wall-mounts and screws. Always consult the manuals for the television and wall-mount for specific safety instructions.

The Sony TV comes with 4 VS screws

When it comes to mounting your Sony TV, it's important to ensure you have the correct screw size to avoid any damage to your television. The Sony X900H comes with four screws already in the VESA holes, but that's not all. You'll also find a set of four "VS" screws included with your TV. These special screws have a unique design, featuring a threaded end with a portion painted red, and a cylinder on the other side with internal threading.

These VS screws are meant to be used in conjunction with the VESA screws. First, remove the VESA screws from the back of your TV. Then, screw in the cylinder-shaped VS screws so that the female end is flush with the back of your TV. Now you're ready to attach your mount. Simply use the VESA screws you removed earlier to secure the mounting brackets to the cylinders on the VS screws.

It's important to note that some users have mentioned using washers with the screws, but this is not always necessary. The washers that come with the screws can be left in place, but they don't need to be used if your mount doesn't specify them. Additionally, while some people have used longer M6 screws, it's generally recommended to use the screws provided with your Sony TV and mount to ensure a safe and proper fit.

Remember to always refer to your TV's manual and the instructions provided with your mount to ensure a safe and secure installation. Improper installation can lead to personal injury or property damage, so it's always best to take the necessary precautions and follow the recommended guidelines.

Sony does not recommend using third-party wall-mounts and screws

Sony does not recommend using third-party wall mounts and screws. While some third-party accessories may be compatible with your television, Sony cannot guarantee their full compatibility as they are unable to test their functionality.

Using third-party accessories may result in injury or property damage. The improper installation of a Sony wall mount or the improper attachment of a Sony television to a wall mount may result in injury to persons and damage to property. The wall and the wall-mount attachment mechanism must be strong enough to withstand four to six times the weight of the television. If the wall strength does not meet these requirements, it must be reinforced before installation.

To ensure safety and avoid property damage, Sony recommends that a qualified professional performs the installation of the wall mount and the attachment of the television to the wall mount. Always use the screws supplied with the Sony wall mount. The use of improper screws may result in injury to persons and damage to property.

The screw hole distance measurements can be found in the product dimensions for televisions article. The wall-mount hole pattern on some models may conform to the VESA Mount Standard, but the number and depth of the screw holes do not.

For specific safety instructions, always consult the manuals for the television and wall mount.

Frequently asked questions